i only still keep my magic clips for the staggertooth. once JRL makes a staggertooth blade, the magic clips are out of my station
@ConcisetheBarber
Ай бұрын
That’s would be interesting
@mikedog5289
Ай бұрын
Video so good I need to watch it again to really absorb the valuable information right now I use the jrl fade blade and I really love it
@ConcisetheBarber
Ай бұрын
Dope Mike glad you like it
@Amazinghumor
26 күн бұрын
Appreciate this content Og🙏🏽
@ConcisetheBarber
26 күн бұрын
you're welcome
@Mackcuttin
Ай бұрын
In my experience with them all, the caper blade set is less forgiving when fading. Super intentional with how it cuts. Works different depending on the hair type
@ConcisetheBarber
Ай бұрын
True also depends on the barbers how they use it
@nazarethproductions7095
Ай бұрын
Best blades for me is the is the bablyliss OEM blade, babyliss taper blade, and oster fast feed blade. Good all around wahl fade, jrl vapor and andis taper blade. (Don’t last long) Every other blade either pulls or snags the skin, or just doesn’t as I like no matter how it’s adjusted.
@ConcisetheBarber
Ай бұрын
Dope line up
@Mr.Oct___
Ай бұрын
I use a ceramic on my fast feed. Love that…
@ConcisetheBarber
Ай бұрын
yea man dope combo
@jovanjubert4046
Ай бұрын
They do make ceramic stagger blades and i put cermic on my corded masters and yes it stays cooler longer.
@JoRd4n-Kutz
Ай бұрын
Most hated Wedge blade is missing my guy!!😆
@ConcisetheBarber
Ай бұрын
lol true..its definitely not one of the most used...that a specialty blade same at the surgical blade
@desmondmitchell5602
Ай бұрын
I love that blade.i Didn't at 1st.untill iI learned to cut with it
@josethebarber239
Ай бұрын
Crazy thing is it's 1 of my favorite blades.
@jt2475
Ай бұрын
@@desmondmitchell5602what tips do u have using it?
@No1Similar2Norm
Ай бұрын
The black wedge blade goes through bulk just as good as any blade up there, plus it’s fades cleaner and closer, so I don’t understand why it’s not used as much. And it naturally lays flat on the scalp when blending and detailing. Most barbers think fade blades are the way to go when fading but don’t hold the blade flush to the scalp, instead they use the blade at a 45 degree angle which is wrong.
@alexisbrown733
Ай бұрын
Thx u for sharing very informative 👍
@ConcisetheBarber
Ай бұрын
You’re welcome
@bradcresswell4255
16 күн бұрын
So the cocco now has sc cutting blades and the faper blade doesn't come with that cutter that is the suprent cutter blade
@ConcisetheBarber
15 күн бұрын
ive been told that they upgraded the cutting blade so if you get a cocco blade now it might be different
@akronrc2827
Ай бұрын
Faper blade on magic clip! Crazy great vid
@ConcisetheBarber
Ай бұрын
Thank you 🙏🏾… glad you liked the vid
@ljjlander1
Ай бұрын
@@akronrc2827 Imma try the faper blade with the FF cutter on my MC
@terrence4069
Ай бұрын
Got a link and code to buy them black fast feed blades and ceramic cutting blade?
@raze2400
Ай бұрын
Which blade would he best for bread? I like no clip all the way to the top
@ConcisetheBarber
Ай бұрын
what do you mean by no clip?
@topcatgrindhard2959
Ай бұрын
Much needed🔥💈👑
@ConcisetheBarber
Ай бұрын
Glad you enjoyed the video
@flowmagic5
Ай бұрын
Right to the point 🤙🏽
@ConcisetheBarber
Ай бұрын
Thank you
@terrence4069
Ай бұрын
Faper or taper blade with magic staggered cutting blade even more forgiving?
@joshuasuarez2370
Ай бұрын
Taper blade is more forgiving.
@jt2475
Ай бұрын
Anyone have experience with the mim blade? What I like or dont about it
@davidsee3566
Ай бұрын
Rad content my guy, i love that babyliss blue blade. I use it on my Tpob goblins. It’s my go to for detailed fading. What are your thoughts on the wedge blade and the blade that comes on the TPOB Play? Respectfully
@desmondmitchell5602
Ай бұрын
You forgot about the wahl taper blade...1006
@ConcisetheBarber
Ай бұрын
It really .. it’s a taper blade so I talked about that blade .. many companies have taper blades just showing the true differences to blades period
@desmondmitchell5602
Ай бұрын
@@ConcisetheBarbergotcha
@identify952
Ай бұрын
Do trimmer blades next
@ConcisetheBarber
Ай бұрын
Working on it
@identify952
Ай бұрын
@@ConcisetheBarber thanks man 💪🏾 I’m looking forward to it
@ljjlander1
Ай бұрын
There's a blue mim blade with 27 teeth. You should review that one
@ConcisetheBarber
Ай бұрын
Yea I would like to try that one
@Luke-wh9ru
Ай бұрын
Babyliss loves over releasing jeez... the 27 tooth doesn't come on the loprofxone I'm assuming?
@desmondmitchell5602
Ай бұрын
@@Luke-wh9rulol nope
@Luke-wh9ru
Ай бұрын
@@desmondmitchell5602 shady biz moves right there fr!
@BigT1523
Ай бұрын
Will the stagger tooth Wahl cutting blade fit on the babyliss lopro fx with the MIM blade or the TPOB Play??
@ConcisetheBarber
Ай бұрын
yes it should fit on the lopro
@AtTheBarbers.Polska
Ай бұрын
Nice!
@ConcisetheBarber
Ай бұрын
Thanks!
@tww15tube
Ай бұрын
Lets go!
@ConcisetheBarber
Ай бұрын
thank you
@user-uh1nm3dj4l
Ай бұрын
If I need one good caliper just for styling the beard, do you recommend whal Magic Clip Gold ?
@ConcisetheBarber
Ай бұрын
That’s not a bad one to pick plus its good pricing and I also have a discount with wahl at their direct site (concise15)
@arealoptical
Ай бұрын
how about vgr-001/kemei 2796 fusion blade??can you review it??
@ConcisetheBarber
Ай бұрын
yea one day when i get it
@arealoptical
Ай бұрын
@@ConcisetheBarber okay bro..waiting for it👍👍👍🙏
@valetudo025
Ай бұрын
Switching the blades out to ceramic does not make the blade move faster. I tested this out with two corded fast feed clippers. I used the RPM app, Giri. Both machines ran at 3633.7 rpms. Unless I’m incorrect, I think the machine is capped at that rpm speed which would make the blade move at the same speed.
@ConcisetheBarber
Ай бұрын
i have that rpm tester as well ...however it doesn't detect 100% accurate but its close ...and for me ive used it on masters and fast feeds ..i feel it move faster however i like the steel better...but most that use ceramic will probably say the same that it can move faster
@ljjlander1
Ай бұрын
@@valetudo025 there's less drag with ceramic tho
@joshuasuarez2370
Ай бұрын
Depends on the motor type and clipper. It certainly does increase speeds on many setups. I always do before and after RPM tests when modifying clippers. Will never slow it down, but high chance to improve speeds slightly by around 5-10 percent in many of my test findings. Poor RPM apps don’t do the job. You need to buy an actual rpm laser tester to see it properly
@valetudo025
Ай бұрын
I use fast feed at work with a ceramic blade. I don’t think the blade moves quicker. It might be smoother and stay cooler longer. after using the rpm app and watching the blade move, I still believe that particular machine is tuned and set at a certain rpm speed. Nothing will make the blade move faster, and if it does, it’s negligible. I think this myth came out of it moving faster back in the day before all these cheap rpm apps were available on phones. I’m going to call this one debunked.
@valetudo025
Ай бұрын
@@joshuasuarez2370 it may increase the speed on other machines (vector motor) but on the fast feed it does not. I haven’t tested other clippers with ceramic blades to confirm or not.
@user-uh1nm3dj4l
Ай бұрын
Which trimmer for beard design and lines do you recommend, Babyliss Gold fx or saber?
@ConcisetheBarber
Ай бұрын
Both are good really preference with that comparison
@ConcisetheBarber
Ай бұрын
Do they both come with a dock ? Battery life etc etc .. like that time of stuff .. but performance is very comparable
@user-uh1nm3dj4l
Ай бұрын
@@ConcisetheBarber thanks man
@BigT1523
Ай бұрын
What clippers will the Wahl stagger tooth blade fit on???
@ConcisetheBarber
Ай бұрын
its a good amount ..say the name of them and i can let you know
@dailybreaddaily7300
Ай бұрын
@@ConcisetheBarber instincts?
@DonTheBarber
Ай бұрын
🔥🔥🔥
@ConcisetheBarber
Ай бұрын
Appreciate it
@EugeneHenderson-jt8kf
Ай бұрын
Which blade has that crunch factor
@ConcisetheBarber
Ай бұрын
Andis and oster will always have the loudest sound to me
@EugeneHenderson-jt8kf
Ай бұрын
@@ConcisetheBarber I put the fusion blade on my VGR v003....it has a nice crunch on the low speed 7000 rpms .....high speed 8-9000.......blades definitely are the difference
Пікірлер: 80