But that is the weakness of the Blaylock - I am not aware of any lock that fits on the Blaylock which has a concealed shackle which will prevent the use of bolt cutters to defeat the lock and thereby effectively defeating the Blaylock. The "disc" Masterlock which we defeated is the strongest lock we could find that fits the hole in the Blaylock. If there is a concealed shackle lock which fits the Blaylock, that would be a significant deterrent.
@125cubanito
6 жыл бұрын
Milton Odom The solid body magnum is alot stronger than the disk. I have that padlock + baylock and its a beefy setup. Also you can use a hidden shackle lock with the baylock, their are a few pictures on amazon.
@punknhead23
6 жыл бұрын
Puck lock?
@kylefergusson5789
5 жыл бұрын
@@ft.knoxlocks4790 I'm late to the party here, but I concur. I use a trimax puck lock with concealed shackle on my blaylock. Would lock to see a defeat on that combo.
@rbhe357
3 жыл бұрын
@@ft.knoxlocks4790 Sure there are. Its designed for a puck lock, the same lock you recommend, which is completely concealed. I happen to use a SPSA80, found on Amazon for twenty five bucks. You can barely even see the shackle.
@jeff7389
2 жыл бұрын
Why cant we just have our own terminators on site?
@1066toph
4 жыл бұрын
You can defeat any lock with the right tools but this seems to be the best choice for the money
@ft.knoxlocks4790
4 жыл бұрын
there is a significant difference with defeating something with just bolt cutters or a pry bar, compared to using power tools which make a lot of noise and draw a lot of attention to you, that is why our design would require something much more substantial to defeat
@jlrnky
5 жыл бұрын
What lock would you recommend using with the baylock?
@ft.knoxlocks4790
5 жыл бұрын
The best solution that i would recommend if you dont want to replace your blaylock would be to use a concealed shackle puck lock, that would make it more difficult to defeat
@MrBigTexFyre
4 жыл бұрын
Ft. Knox Locks Thank you for the honest reply. Good to see someone give advice without trying to steer the guy to buy your product. Thanks
@1066toph
4 жыл бұрын
I just watched a KZitem video guy just picked the puck lock in 20 seconds no bolt cutters or power tools. Again know how and the right tools will defeat any lock you can buy at a hardware store.
@chilidog73
5 жыл бұрын
Could this be defeated by a crow bar or sledge?
@ft.knoxlocks4790
5 жыл бұрын
Possibly we might give that a try as well in the near future
Пікірлер: 16