The most valuable thing in these videos is the narrating. I will eventually learn Blender, sometime when I finish College or have a Semester break. I had to subscribe either way even without watching most of these (yet), narrating the keys you are pressing is such a valuable thing for beginners.
@thecreator8353
3 жыл бұрын
When I first came here you had very low subscribers but now you're at a great place Very proud of you
3 жыл бұрын
I think this channel is underrated.
@JayAnAm
3 жыл бұрын
:-) Thank you
@JayAnAm
3 жыл бұрын
@ :-)
@thecreator8353
3 жыл бұрын
@ yes Edit: but now it's better than before
@bmazbmaz2342
3 жыл бұрын
me too,i'm very proud
@jasolively1986
2 жыл бұрын
Thank you so much for clearing up why my axis was not in the direction I was wanting. A+ sir.
@JayAnAm
2 жыл бұрын
Thx!
@josephvanwyk2088
3 жыл бұрын
lol, I always give up as soon as I can't get the spin tool not to work. But yeah - just a change of mindset is needed. Epic tutorial
@acez28
3 жыл бұрын
Thank you so much I've been looking for how to do this
@JayAnAm
3 жыл бұрын
Hey that's great!
@phantomapprentice6749
2 жыл бұрын
Thank you, I'm new to the spin tool , your tutorials never disappoint
@Abdulahi-mq7vc
3 жыл бұрын
I love step by step tutorials, clean easy to follow and informative, subscribed 👍
@JayAnAm
3 жыл бұрын
Thank you very much
@sadyoshhours2769
7 ай бұрын
this is the only tut that worked for me and im really not sure why, but thanks
@Anonymous_User.
3 жыл бұрын
This method saves me so much time. Thank you!
@JayAnAm
3 жыл бұрын
Thx m8, glad you like it
@Latvian3Dman
3 жыл бұрын
Thank you. I admit I haven't really used spin tool so far.
@JayAnAm
3 жыл бұрын
Yep, it's great
@Latvian3Dman
3 жыл бұрын
@@JayAnAm , but, I have used this: blendermarket.com/products/angle-tool
@mosumartdesign
3 жыл бұрын
Thanks Jayanam from Malaysia 👍👍👍
@JayAnAm
3 жыл бұрын
Thank you!
@denniso8577
3 жыл бұрын
Looking forward to more FreeCad tutorials!
@JayAnAm
3 жыл бұрын
Will come soon.
@AlimayoArango
3 жыл бұрын
Thanks for this video.
@AsDevilsDo
2 жыл бұрын
Fantastic and easy to understand! Thanks Jay!
@pikachufan25
2 жыл бұрын
ahhhh now im goin Full Circle. XD plus i learn something new every day Just the way i like it Thanks i like this simple Approach to a Complex Question.
@4oani278
2 жыл бұрын
If your mirroring is not going well and you dont get an arc, you should shange a pivot point before mirroring. In object mode (with plane selected) go to the Object tab (upper left) and here tab Set Origin. You can move the cursor first and than move origin to the 3d cursor or else
@bmazbmaz2342
3 жыл бұрын
once again,cool tutorial , had problems tryna understand that tool ......please don't forget to make a tutorial on explosion spritesheets / flipbooks in blender for use in unity,please thanx!
@darkcult99
3 жыл бұрын
Fantastic tutorial!
@RAKKXLSE
3 жыл бұрын
thanksssss i needed this
@JayAnAm
3 жыл бұрын
Great
@DanielSamulewiczXXI
2 жыл бұрын
Thank you for JMesh add-on! What do you do after selecting Symmetrize button? I tried to press on both green -Y and Y and other color dots. But non of this gave me mirror effect as in tutorial.
@muhammadfathurrahman4350
2 жыл бұрын
Thank you
@coreys2686
3 жыл бұрын
I use the mirror modifier to add thickness at the same time. With the inset tool: if you hold down the control key, you can extrude the inset faces in the same operator.
@bobross9370
3 жыл бұрын
1:24 You didn't need to move the 3D Cursor, you could have just selected the bottom edge and used the spin tool and it would have perfectly placed the spin without moving the 3D Cursor. Excuse my nitpicks, it's a great tutorial, keep it up.
@JayAnAm
3 жыл бұрын
No, I dont want to spin the bottom edge, I want to spin the top edge, so I have to select this edge.
@bobross9370
3 жыл бұрын
@@JayAnAm Perhaps you misunderstood, I was simply saying it's easier to spin from the bottom edge than it is from the top simply because the way your plane and 3D Cursor were positioned made a perfect alignment.
@JayAnAm
3 жыл бұрын
@@bobross9370 In this case yes, but in a real modeling situation you can't always move your mesh around just to match the alignment for spinning. This is why it is a better and more general way to move the 3d cursor, which is the pivot for the spinning.
@patryk9806
2 жыл бұрын
It's not just a spin tool tutorial, it's some basics + spin tool, if you want to get straight to what you were looking for, go to 1:32 ;)
@agyab_cg
3 жыл бұрын
can be used in the future..pro tips 💖👌
@dannyteo9618
3 жыл бұрын
Thank you for sharing this tool. Can I use this tool to animate the spinning effect? How shall I do it?
@lutzpleuter6388
6 ай бұрын
What if I dont't want to spin around a global but a local axis? How can I achieve this?
@pikachufan25
2 жыл бұрын
hmmm interesting Modifiers you have there hmm
@shovel_salesman
Жыл бұрын
good video
@desaindigital
2 жыл бұрын
Newbie here. I ended up with two edges after applying the mirror modifier. Dissolve edges at 4:20 didn't seem to work on my two selected edges. I had to remove the edges and selected Vertex > New Edge from vertices. Anyone know what happened here?
@bryancorringham
3 жыл бұрын
Thanks, I'm super new to blender, And this tool really confused me.
@knswain1843
3 жыл бұрын
Sir, Please i want to export ase file format, but not showing. Can you please make a video video with data
@backforblood3421
3 жыл бұрын
It is not giving me any box with controls for the Spin tool.
@skvibl696
3 жыл бұрын
Help, please. When i press "N" ( 5:37 ), no tab "JMesh", Blender 2.91 .
@irfanotherone1576
3 жыл бұрын
it's because you have to install the add on first check the addon link in the description
@skvibl696
3 жыл бұрын
@@irfanotherone1576 Thank you friend, did not notice.
@vigneshsa7906
3 жыл бұрын
This is good though but best way is bridge edge loops with perpendicular faces you can create..
@1989johno
3 жыл бұрын
Or bridge two planes... And loop cut the bridge and bevel to get the exact same result... Wsnh
@sandeeplama3905
3 жыл бұрын
how to add jmesh 3d print pannel in side bar
@JayAnAm
3 жыл бұрын
3d print is not jmesh tools addon.
@sandeeplama3905
3 жыл бұрын
@@JayAnAm thanks bro
@BRNDMG24
2 жыл бұрын
Make me paratha.
@yassinesahri2983
Жыл бұрын
sf ayman chra7li hhhhhhh
@bluewizard420
2 жыл бұрын
short cut keys might of been the worst idea to add to blender. it makes learning the program take so much extra time becuase I have no idea what these buttons Im being told to press do. I just press them. They have no system that actually makes sense. I would rather click things I can see with my eyes rather than know 400 short cuts on my keyboard which save a minsucule amount of time.
Пікірлер: 61