So, so helpful. I'm surprised how such a simple thing is so hard to come across, so thank you for putting this out here, especially in such a concise and informational manner!
@mommymilkermemes5054
2 жыл бұрын
I cannot express my gratitude enough! I stubbornly refused to use Blender 3 because the installer I got was for 2.8 which someone told me was better. I got really comfortable with modeling but spend, no joke, 4 days trying to get textures working! I tried 3 but found it even less intuitive, but your video made it easier than ever, thank you!
@jeff.anderson
2 жыл бұрын
Your demo is really really good. A lot of blender demonstrations are super hard to follow, so kudos to you. I think for newbies we get some weird setting accidentally set and then it doesn't behave the same. In this video I had just one stumble where the grid for the unwrapping didn't show. Clicking the "UV Sync Selection" button to keep the edit view in sync with the UV panel -- then the grid showed.
@TutsByKai
2 жыл бұрын
I really appreciate that Jeff! Ahh, I see. Gladly you were able to figure out why the grid was hidden!
@marcossouzajr1711
Жыл бұрын
This works, this is an example of how a tutorial totally fail when a simple tick on a tiny button is not told.
@criddycriddy
2 жыл бұрын
One of the best short tutorials on uv I have seen, simply put and great paced. Cheers pal
@christianseixas4374
2 жыл бұрын
Thanks man! You helped me a lot! Please, continuing with your tutorials, because they are so helpful.
@chadgodstave
2 жыл бұрын
Almost scratched my hair out then I found your video you're a hero man
@hellopeople2395
Ай бұрын
thx for being straight to the point :)
@MicrosoftsourceCode
Жыл бұрын
I have been messing about with Blender and other 3d software for years and I got to say this is one trick I never knew about. 👍👍👍👍👍
@jimbovitikan4848
2 жыл бұрын
dude i just stumbled on this channel, aren't you like super underrated? damn
@TutsByKai
2 жыл бұрын
Thank you man, I really appreciate that!
@HarryReisenleiter
2 жыл бұрын
Thank you! This tutorial is so helpful, especially in texturing landscapes (like texturing a transition from grass to rock to snow) and other meshes. Thanks again.
@RobotusDominus
Жыл бұрын
Yess this was exactly what I was looking for!! :D and simply and eaisly explained! Thank you for the awesome explanation!
@drumboarder1
2 жыл бұрын
Getting into the real complex stuff I see
@TutsByKai
2 жыл бұрын
Beginner or advanced. I make content for everyone.
@drumboarder1
2 жыл бұрын
@@TutsByKai even racists?!
@SMHorne
2 жыл бұрын
@@TutsByKai Thanks! We've all got to start somewhere! 🏆
@BigBankzSon
Жыл бұрын
@@drumboarder1 yup
@jessiegorin4664
Жыл бұрын
THANK YOU! Really easy to follow, even for a total noob like me. You're the best, dude!
@SynovexH001
4 ай бұрын
Fantastic! I was getting so stonewalled by this, and AI guidance put me on such a wild goose chase. Big help, thanks kindly!
@macpetrol
2 жыл бұрын
Dude, Thank you so much! Amazing tutorials!
@ibkdayo
2 жыл бұрын
Thanks so much this really helped me. I’ve been stuck on this for a while
@calvin4579
2 жыл бұрын
Thank you! Very helpful tutorial! I can do a lot of things with this!
@Bendyinksad
3 ай бұрын
I can’t move it
@aleksdizhe
Ай бұрын
whats up?
@zelda2664
Жыл бұрын
Thank you so much! I was going crazy because I couldn't find this option any more!
@DrSupermanShadow
2 жыл бұрын
thank you for a really simple blender tutorial. I could actually follow this. Do you have a complete series. I use b for artist UI btw. This video does help a bit. Even if you do have to press 1 to many button instead of just say selecting a tool. tool options, the you simply us your mouse to drag and scroll. or using a tablet pen to move the image the way you want. Fact: blenders UI, is 10 years out of date. for inclusivity, intuitivness, and simplicity. (and the core coder team does refuse to update it so those in the creation field with autism and low income can use it and have a frustration free experience) it also has 20 million complaints about it. yet they state the only have 14 million down loads haha.
@MrAnthonyIII
10 ай бұрын
Thanks for explaining this so simply! All I'm trying to do is add an image onto a television screen object, and every other tutorial was convoluted and didn't even address simply adding a flat .png onto a flat object
@TutsByKai
10 ай бұрын
Glad it helped!
@metehansirin
Жыл бұрын
Thanks for the helpful tutorial
@LotusUnivers
Жыл бұрын
thanks for making this awsome tutorial for free
@weiyan21
2 жыл бұрын
This is great! Could you do this with a video file instead of an image and have it play on an object?
@ellencamargo8046
2 жыл бұрын
Thanks for the video! helped me a lot!
@sonnyyyyyz
2 жыл бұрын
hey, really sorry to bother you but when i pressed tab the squares showing the sides of the object didnt show up? can you provide me with any help?
@genuswater8011
Жыл бұрын
Instead of hitting tab, there is an icon in the top left corner next to where you select your view with two arrows pointing in different directions diagonally - hit that instead.
@namira3537
Жыл бұрын
hey man, i spent hours and cant find the icon. which one is it? im starting to feel like i want to cry :') thankyou in advanced
@genuswater8011
Жыл бұрын
@@namira3537 If you have an object selected (the object you want the UV skin for) then you change to the UV editor screen, press tab, you should see the layout of your UV. If you don't there is a button with two diagonal arrows right next to the view drop down button.
@socarnaytoo8518
Ай бұрын
You have to have the cube selected in the right hand window if in object mode click on the cube it should turn yellow switch the right window now to edit mode some use the Tab key or you can use the drop down menu you might have to mouse scroll to get to see all the menus in these smaller windows, now over in the left "UV" window you should see an icon with two arrows one is pointed up to the right the other is pointed down to the left hover over it with the mouse pointer and it should say UV sync selector click it that should restore the boxes on the UV map. This reply is for others who have had the same problem like me.
@urusite
2 жыл бұрын
3:05 you can separate the single box out, but in my case it drags along the adjacent boxes together
@seashellstorys1265
2 жыл бұрын
Same how to fix?
@MrJjjakey
2 жыл бұрын
next to the UI mapping selection where you picked face mode change "Shared Vertex" to "Disabled" and now you can move the UI maps like the video
@naviusia
2 жыл бұрын
@@MrJjjakey idk how to do that and i have the same problem as the person above :(((
@MrJjjakey
2 жыл бұрын
@@naviusia im gonna be real with you, the first and last time I've touched blender was that comment 3 weeks ago. all I remember is doing what I said managed to fix it, good luck soldier
@naviusia
2 жыл бұрын
@@MrJjjakey I DID IT OMG SJCJSHDJW
@masonbrowne837
2 жыл бұрын
I'm trying to set the image to be on only one side, but it's not working. How do I set the image to 1 side only?
@vovk50
Жыл бұрын
Thank you for this, very helpful :)
@Zeales_yes
Ай бұрын
Tysm this helped alot
@enjoyenjoy5721
2 жыл бұрын
Defo Subscribed! This was so much fun!!
@Praecantetia
2 жыл бұрын
Thanks for another Tutorial!
@supervoidbruh2813
2 жыл бұрын
This was sooooo helpful!!!
@michaelmckenna2462
Жыл бұрын
Thank you so much for this footage!
@lakshmiprabhajs5743
Жыл бұрын
That was helpful, Appreciate it!!
@MaBa263
2 жыл бұрын
Hi ty for the tuto! I wanna know how you can apply a different image to each side, ty!
@Artbyzig
2 жыл бұрын
sicc, keep up the great work my guy
@Amarjeet-fb3lk
Жыл бұрын
Hi, I watched this video. It's a great tutorial. But, this only works if the object is cube. I have a 3d rectangle and a rectangle poster, I want to stick that to the rectangle.But does not work. Can you make a tutorial for that. Thanks
@LeoWinslet
2 жыл бұрын
Can you do a tutorial on how to do it on one side and it’s a circle please 🥺???
@Hetacky
Жыл бұрын
THANK YOU SO FREAKING MUCH AHHH
@phamduy1906
8 ай бұрын
Can we talk about the gojo in the thumbnail please? 😂
@s.b.a_sagaming9005
Жыл бұрын
I love this tutorial straight to the point and informative but i need help flipping around a cylinder
@trashgamedev
6 ай бұрын
Very helpful, cheers!
@arckanumsavage2822
6 ай бұрын
Looks clear and effective. But the faces of my cube are triangles in UV editor 🗿 how to make it square?
@JoeFree-ew6uy
Жыл бұрын
So helpful, thank youuuu
@applero464
Жыл бұрын
Thank you so so so so much, I cried out of stress 100 times when I did t on my own
@NOTVMTGTVRTG
Ай бұрын
Thank You
@N1t_in
3 ай бұрын
thanks this helped
@SpiritRaps
2 жыл бұрын
@TutsByKai after I import into Unity I can’t see the image. Btw I love this tutorial!!!
@TheSillybits
2 жыл бұрын
I am a novice so please forgive me probably asking silly questions… but I’d like to add an image containing transparent area’s, would that make a difference? Would I need to delete the cube’s faces? Or just construct a cube from the image itself?
@fieryskills21
8 ай бұрын
Nice vid. It has been helpful. How differently would I do the face select part for a keentools facebuilder model?
@VaishnaviKadam-jc1kq
3 ай бұрын
Tab button is not working for me...is there any other option to obtain the sides of square after applying the image
@ClowReed.
Жыл бұрын
Thanks so much!
@musclegainer6322
Жыл бұрын
Does anyone know why I can’t seem to see the images when I render??
@whooomzoilo4833
2 ай бұрын
What if the perspective of the imported image is different? Slightly side view but not fully.
@torowu5388
Жыл бұрын
Oh, that’s cool!
@thatsquidRBLX
18 күн бұрын
why is ur boxes to move the texture around different? and when i move mine it moves the rest of others aswell, help
@Arcangel0723
2 жыл бұрын
last time I was this early was... I can not think of a good punch line damn
@trelligan42
2 жыл бұрын
"Last time I was this early I was ... in the wrong place. Sorry."
@austinkeithgrant
3 ай бұрын
What do you do about images that are seamless patterns? Like swatches designed in Adobe Illustrator or something tileable.
@AHeroInHell
11 ай бұрын
This is the first time I've seen your channel. Can you also do this with video clips on the cube face for its different faces e.g. all four sides but leave the top and bottom free. If you have a link if you've already shown this it would be much appreciated. Thanks :)
@luapsky
Жыл бұрын
Thank you! ^^
@Belg-videogames
Ай бұрын
TYSM
@clappazon
5 ай бұрын
THANK YOU
@Vertexvoyager
6 ай бұрын
there is still a part that white in the faces and wont allow me to place the image texture in that area
@AI-Hallucination
Жыл бұрын
Outstanding these are the ones with does it work with any texture init
@kilsnacks
2 жыл бұрын
when I hit tab nothing happens on the left side no sections
@takocat1340
2 жыл бұрын
same here
@joshuainovero7522
2 жыл бұрын
@@takocat1340 I know this is late but the reason why this happens is because you selected one vertex. You should select all by pressing "A"
@lang9686
2 жыл бұрын
@@joshuainovero7522 helped me out, thanks mate
@CHANNELXP
Жыл бұрын
Cool video , but how do you put images on a 3d object with curved and and round edges?
@verycoolguy64
Жыл бұрын
Does anyone know how to resize the texture in UV Editing?
@ann-catherinelemonde9472
Жыл бұрын
Thanks for the video, is it possible to add a moving image over a 3D object in blender?
@aleksdizhe
Ай бұрын
Thaaaaaanks!
@biggumbaIIs
Жыл бұрын
Hey TutsByKai! Could you tell me how i export my obj with the images on it? (if i export my obj, the image will not appear)
@PlutoGaming3.0_Official
5 ай бұрын
Awesome
@vipul3571
2 жыл бұрын
thank you , i solve my mistakes
@dulu6830
Жыл бұрын
how come this doesn't work for objects that have been sculptures? I've tested and I can see the image on a cube but when I use a sculptured cube it doesn't appear and it shows as a white colour?
@roymcghee7450
2 жыл бұрын
does this work with Mac computers?
@TheExFatal
Жыл бұрын
I have a model that is not a cube, and my texture just stretches, while the texture is a 16x16 texture, how do I fix it? I clicked on "repeat" in the image properties - same thing
@MindEyeMediaVR
Жыл бұрын
This is a very helpful video. How do you add multiple images to a single object? I am trying to re-create a product box in Blender and each side of the box has a different image. How would I do this?
@TutsByKai
Жыл бұрын
Glad to help!!! If you hit tab to go into edit mode, select the face you want to put the 2nd image on, then go to the the material tab, create a new material, hit assign and add the image texture like we did in this video - that should do the trick! Sounds like a lot more steps than it actually is HAHA!
@MindEyeMediaVR
Жыл бұрын
@@TutsByKai Do I add the next image as another Base Color, or do I add it somewhere else?
@erino_0
Жыл бұрын
what so do if your cube has bevel so has smooth edges. My UV map has many faces and also some of the cube faces are split in hald and are on other areas. This is so hard to explain basically my UVmap looks a lot more complicated than yours and i cant simply resize 6 faces to the size of my image. Is there an easier way to do it?
@SlickFX_TF
Жыл бұрын
I got to upload the image but didnt see any squares in UV mode. Went back 5 times. Maybe because I have a newer version
@SkyLexin
2 жыл бұрын
it doesnt work, all parts bend when its moved
@AmrAshraf-rv1oh
2 ай бұрын
"Unwrap failed to solve 1 of 1 island(s), edge seams may need to be added " does anyone have this problem ?
@2dapoint424
2 жыл бұрын
Can up have multiple images (one in each face)? Can those be exported as uv bitmap?
@TutsByKai
2 жыл бұрын
Yes! I'll be uploading another tutorial just for this very soon!
@nojnavick
2 жыл бұрын
You could make them one image and then just select different parts
@coolzack1012
2 жыл бұрын
@@nojnavick thats how it was in the first part of the video
@rumbleofdrums527
Жыл бұрын
Thanks, 🖐
@hihihihi15841
Жыл бұрын
thanks you
@1937Brett
Жыл бұрын
I want to be able to add my heatblock so I can make a mold for a silicone sock can you help me?
@rgldewz
Жыл бұрын
ty for tutorial
@frozzic9268
2 жыл бұрын
everytime I do this it turns pink, any suggestions?
@christianseixas4374
2 жыл бұрын
It's pink because you haven't selected your image already.
@OTGSavage
2 жыл бұрын
hey man could you help me, so i got a 3d model and did all the unwrapping and all that and i got done painting it and i go back to layout and the paint is gone and i dont know how to apply the texture, if you know what im talking about could you help?
@carlzyrusmariano9530
2 жыл бұрын
did it in blender 2.8
@cowanthitnguoi5871
Жыл бұрын
Why the face select these stick together I can't move one of them
@twitchybarber
2 жыл бұрын
I hate blender so much
@ProdigyAng3l
Ай бұрын
Fr
@kwittyyyyy
Ай бұрын
**cries coquette-ly**
@Seaweeshurt
28 күн бұрын
Me Neither
@fmjmedia22
10 күн бұрын
The learning curve is insane
@sergueydiaz303
Жыл бұрын
kul tutorial
@lancewyhowski8234
2 жыл бұрын
This might not be the right place to put this question, but I'm hoping someone can help me. With this video I was able to get a image onto a sphere, but uv editor screen there is nothing to select to scale or move. Any advice is appreciated
@krown466
2 жыл бұрын
Im having the same problem im trying to add a video to a tv screen and when i look in the uv editor there is nothing to choose. Also the video file i put on the tv screen is sideways.
@lancewyhowski8234
2 жыл бұрын
I thought I had tried everything, but I learned a bit today and figured it mostly out. I needed to activate the UV sync selection. It looks a little funny displayed on the object, but I had a object to scale and move
@tommyandtammy1
Жыл бұрын
Thanks and God Bless.
@TutsByKai
Жыл бұрын
Same to you!
@seashellstorys1265
2 жыл бұрын
@TutsByKai , it dosent have the button for selecting mode, what do I do?
@ericchristiansen2272
Жыл бұрын
excellent work. you have been a big help.
@TutsByKai
Жыл бұрын
Awesome, thank you!
@l1m1nal2
Жыл бұрын
Why is my image on the cube static, and not what it shows?
@CoolTelho
2 жыл бұрын
0:34 i did but different stuff shows up that i dont understand
@OM33WRLD
Жыл бұрын
Does this work for putting designs on mock ups ?
@augusta131
Жыл бұрын
when i export them it doesn't have the texture on them. how do i fix this?
Пікірлер: 198