i was following the official flip fluids videos and couldn't get it to work thank you so much bro got my subscription and like will def be watching other videos
@aliamir85
2 жыл бұрын
Happy to hear that, thank you bro
@johnnyliu3D
Жыл бұрын
This is exactly what i need. Thank you so much
@aliamir85
Жыл бұрын
You're welcome
@mohamedmoussa1477
Жыл бұрын
adding voice elaborations will make it even more fantastic. good luck
@aliamir85
Жыл бұрын
Thank you bro
@SourceAwareness
Жыл бұрын
Thanks Bro, you're Awesome!!
@aliamir85
Жыл бұрын
Thank you bro, you're welcome
@BillCipher_A_G_
Жыл бұрын
Great tutorial, thanks!
@aliamir85
Жыл бұрын
Thank you bro
@Igoreshkin
9 ай бұрын
More Flip Fluids tutorials please :)
@mohamedmoussa1477
Жыл бұрын
very nice. thank you so much
@aliamir85
Жыл бұрын
You’re welcome bro
@peterchlpek
Жыл бұрын
Very nice water. Is there a way to slow down Suzanne in the "under water" with any effectors to simulate the water resistance? I am new to blender and flip fluids, but I know they do not interact with rigid bodies. Thank you
@aliamir85
Жыл бұрын
Unfortunately that water resistance you are asking is not included in flip fluid simulation by itself, you should create it manually using force fields.
@badcapybara
2 жыл бұрын
Great tutorial man, thanks! Only problem I don't have Whitewater foam and bubbles material, only Water Ocean Volumetric. Maybe because Im using Demo version?
@aliamir85
2 жыл бұрын
Thank you. Yes may be because you are using the demo version. Actually I do not consider it as a tutorial, I just recorded the workflow and published it without explaining some details, becaude I am very busy for the next upcoming months. In the near future I hope I can make some nice tutorials with more details.
@leeart77
Жыл бұрын
wow thanks
@aliamir85
Жыл бұрын
Thank you bro
@klappivision781
Ай бұрын
That's just what I need. I hate tutorials with no explanation though. Couldn't follow along so I gave up.
@aliamir85
Ай бұрын
Happy to hear that bro
@francescoallushi7580
11 ай бұрын
Hello, thanks for the video! Though I do have a problem: my object does not collide with the fluid. Any ideas on what I should do?
@aliamir85
11 ай бұрын
Make sure to make your object as obstacle from the flipfluid options.
@Farazulous
Жыл бұрын
Have the Paid version of the Flip Fluids addon but the bubbles and foam are not appearing or showing up :/ Followed the complete video though. What could be the problem ?
@aliamir85
Жыл бұрын
First you have to activate white water simulation in the options, second, the bubbles and foam will appear at the end of rendering each frame. I think there is an option that make it appear in real time viewport rendering.
@crystalyu4966
Жыл бұрын
Hi, thanks for the great tutorial! I found that when simulating fluid using Blender's Mantaflow, the number of particles changes every frame. Not sure why. I need constant number of fluid particles in my animation. Will the FLIP Fluids addon help to solve this problem? Thanks!
@aliamir85
Жыл бұрын
Actually I have a little background on how mantaflow works but I think in flipfluid the number of particles will not change.
@rickcion
Жыл бұрын
A question how the foan, bubble, spray materials are generated because it does not appear in the demo version for me
@aliamir85
Жыл бұрын
This project was done with the premium version of flip fluid, not the demo one.
@bonanzachiang143
Жыл бұрын
Hi, I've been troubled by a problem for a long time and have searched for many videos that don't match the effect I'm talking about, so I'd like to ask you for advice. Do you know how to use Blender to simulate the effect of an object falling into and surfacing from the water? Looking forward to your answer!
@aliamir85
Жыл бұрын
I think you mean how to make an object float on water surface. Actually I think blender cannot simulate this effect by its water simulation physics. I remember I watched a video with a floating object on water surface but the motion of the floating object is made by blender physics, not related to the water itself.
@bonanzachiang143
Жыл бұрын
@Ali Amir Oh,well, it would be a bit of a shame if Blender couldn't emulate it, but thanks for the reply!
@aliamir85
Жыл бұрын
You are welcome bro.
@0A01amir
Жыл бұрын
My obsticle object fell threw the fuild and didnt affect it even at 300 resolution.
@aliamir85
Жыл бұрын
May be you should bake the simulation first, try to delete all bakes first and rebake your simulation. I think if you follow the exact steps you will get the fluid effect.
@sahilj1033
Жыл бұрын
Actually I m not getting fluid options like you my options are limited i only have domain flow and effector in fluid type
@aliamir85
Жыл бұрын
May be because you are using the demo version? Flipfluid is a paid addon
@richaldiaaron
Жыл бұрын
hello sir, wanna ask why my suzanne dont fall but my fluid was effected by the suzanne, my suzzane just stop on the top
@aliamir85
Жыл бұрын
Hi. Did yoo apply rigid body to suzanne?
@richaldiaaron
Жыл бұрын
@@aliamir85 yea, its fall, but after i bake the domain, the suzanne not fall again
@aliamir85
Жыл бұрын
@@richaldiaaron I think if you move the time slider it will move, or wait till the end of baking and check if it fall or not
@Virtual_edits
7 ай бұрын
how make those matreals shaders that you use
@aliamir85
7 ай бұрын
It is included within the flip fluid add on
@arddiii453
Жыл бұрын
why my water result was thick? can you help me sir?
@aliamir85
Жыл бұрын
Try to leave all the flipfluid setting to its default values, especially the viscosity setting
@Virtual_edits
7 ай бұрын
how much ram did you install on you pc
@aliamir85
7 ай бұрын
Ram 16G
@Virtual_edits
7 ай бұрын
storage and gpu and ssd@@aliamir85
@Shattered3582
Жыл бұрын
sadly the film fluids add on isn't free.
@aliamir85
Жыл бұрын
You're right bro
@Shattered3582
Жыл бұрын
@@aliamir85 😞
@Exploring_Me143
7 ай бұрын
why i am getting problem , when i have replace monkey with a cube
@aliamir85
7 ай бұрын
What kind of problem?
@Exploring_Me143
7 ай бұрын
@@aliamir85 i change monkey with my personal project file which shape was cube , but after following your all process with my project file object cube kits not working , but when i am using using monkey its work easily ,
@Exploring_Me143
7 ай бұрын
inshort if i take file as a fbx or obj in it , it is not working .
@aliamir85
7 ай бұрын
Ok. What exactly not worked ? The cube pass through the fluid without interaction or what ?
@Exploring_Me143
7 ай бұрын
@@aliamir85 quiet complicated , let it be , i found another solution , i sont have problem ,
@saygineren8175
2 жыл бұрын
subdivision surfece most importan thing element for flipfluid .... flipflid= monkey subdivs.. this is very veeeeeeeery importand... other elements iare not important..
@siddhuhfiej4
Жыл бұрын
bro what's your pc specs...
@aliamir85
Жыл бұрын
It's a laptop, dell 7577 gtx 1060 max q
@sivarao7126
Жыл бұрын
is this blender software free??
@aliamir85
Жыл бұрын
Yes, blender is a free 3d software, which include modeling, sculpting, texturing, rigging, animation and other features. As I said it is a free software, but here in this video, I used a paid addon for fluid simulation called "flip fluid". Inside blender you can create fluid simulations for free using another tool called "mantaflow".
@MET87
Жыл бұрын
how to create sim in 5 min and than render for 5 days!
@aliamir85
Жыл бұрын
😂😂😂 Actually rendering took about 3-4 hours
@achilles_wiggen
Жыл бұрын
too fast, hard to follow really. Sorry. But you got skills thats a positive.
@aliamir85
Жыл бұрын
Thank you. I will make other videos with much slower timelapse.
@achilles_wiggen
Жыл бұрын
@@aliamir85 thank you. :) i appreciate your video just me beeing old and slow. :)
@aliamir85
Жыл бұрын
@@achilles_wiggen as a temporary solution, if you want, you can slow down the playing speed using youtube itself in the settings.
@RoN43wwq
2 жыл бұрын
so slow simulation
@wekkimeif7720
Жыл бұрын
Lol looking at Flip Fluid none of the movie studios or big professionals use it. There are better programs for generating realistic fluids
@aliamir85
Жыл бұрын
Yes that's right, I think they use houdini in movies
Пікірлер: 75