If you wondering why you can't see the text glow while editing it, this might help. First, When changing render engine to eevee in the render properties, turn on bloom. Next at the top right of the viewport, there's four sphere options, the farthest right looking like a reflective glass sphere, that should allow you to see the text glow without rendering it.
@shirkhan4249
3 жыл бұрын
Thanks M8!
@skuller9182
3 жыл бұрын
God bless u omg
@ilzamulhaq9419
3 жыл бұрын
thanks bro it helpful
@thaislucio3334
2 жыл бұрын
thank you so much!!!
@alanjoseph6398
2 жыл бұрын
U r a savior respect 🤝
@rapidbakker6351
4 жыл бұрын
Plz Give click Buttons On screen It's easy for us to learn easily...Thanks
@deafdogdesign
2 жыл бұрын
What is obvious to you isn't always obvious to someone trying to follow along. I didn't get the neon effect until I went back and discovered your settings at 1.45. You have Bloom turned on, plus ambient occlusions, screen space reflections and motion blur.
@mountainflash2369
4 жыл бұрын
Neon signs don’t have sharp corner you should have gone with some other font like blender guru did in his tutorial to get smooth corners
@izzy-jd7ft
4 жыл бұрын
yeah no watching a 2 hour tutorial when it can be done in 5 minutes
@sharondsouza8054
4 жыл бұрын
@@izzy-jd7ft totally agree....i prefer Ducky's tutorial....no common man is going into so much detailing if you are using it for banners in environment
@ishworpathak3632
3 жыл бұрын
Just bevelling the edges can help
@musicnosuck
3 жыл бұрын
think he's just giving you the workflow guy. it's up to you to apply it. hater....
@mountainflash2369
3 жыл бұрын
@@musicnosuck it's called criticism.
@lemetamax
3 жыл бұрын
Turn on Bloom in the Scene tab to get the bloom effect. Took me a while to figure that out.
@ziasnooby2256
3 жыл бұрын
For the longest time I thought my blender was broken, you are a legend!
@傅榆軒
3 жыл бұрын
That rlly help me a lot omg thxxx
@傅榆軒
3 жыл бұрын
@@fio123 Like a light flares effect, here is to make the neon light spread as it should be
@make_the_world_better_place
2 жыл бұрын
Me too. I was like why mine didn't look like his..
@Only4GamersXyz
4 жыл бұрын
Why all these blender tutorials are so fast? This 6 minute video taking hours to understand it correctly. Please Make these tutorials beginner friendly.
@abdulsamikhan1080
4 жыл бұрын
I can't get the emission shader to work. I set the color, tune the strength and it just changes color but doesn't emit light. What should I do?
@ericmosh
4 жыл бұрын
Turn on bloom.
@womboy2k
4 жыл бұрын
@@ericmosh Thanks
@afakhrik3002
4 жыл бұрын
Thank you! @ducky 3d you forgot ti mention it
@KharaokeTube
4 жыл бұрын
I had the same issue. Glad I searched the comments first!
@lukegibbs1079
4 жыл бұрын
how do you turn on bloom
@kenzxk3321
3 жыл бұрын
How can I change the speed of how fast it flickers
@md.rabiulalamhridoy7391
3 жыл бұрын
Increase your frames. Here his end(120) frame us 360°. But if u gor for 240 frames. Ur end frame should have 360°
@davidmays7052
4 жыл бұрын
cant get the text to show up in the UV editor, i went over the video several times but no luck, any advice? thanks for the great videos!
@NeilJohnMcLean
4 жыл бұрын
Same here, nothing shows up in UV editor. How come?
@Dianaimd
4 жыл бұрын
@Phatt Al but how do you make it look like the actual text and not a bunch of rectangles?
@aryan-gupta
4 жыл бұрын
first go to uv editing tab then to top view and then project from view
@chrisdryer
4 жыл бұрын
Why did he "love" this comment but not comment an answer? WTF. It doesn't glow at the steps that he reaches from doing exactly what he is doing.
@theoneandonlyrevenant4188
4 жыл бұрын
@@chrisdryer It's irritating when KZitemrs do that. A like isn't helping anyone dude, and there's no such thing as a bad student...
@tutog1889
4 жыл бұрын
For those interested, you can also obtain this flashing effect by separating the different objects and performing a pseudo-random function which takes as input "info object -> random" and a value node with keyframes (which gives a concept of time) Good video!
@Casluvschloe
3 жыл бұрын
Very good video for a noob who has NEVER done animations before. However, for you noobs out there PLEASE READ THIS in case you have the issue of the keyframes not inserting. I spent an hour googling this only to figure out how stupidly simple it was. MAKE SURE YOU'RE CLICKED ON THE OBJECT AND THE MAPPING NODE BEFORE YOU TRY TO INSERT OR IT WILL NOT APPEAR. That is all. Thanks for the video.
@henixx792
3 жыл бұрын
الله اكبر الحمد لله لاحول ولا قوة الا بالله اللهم صل وسلم وبارك على سيدنا و نبينا محمد
@nitinsharmax129
4 жыл бұрын
and when are you assembling your rig? i m kind of excited more than you lol
@TheDucky3D
4 жыл бұрын
Bucky Barnes 2 weeks
@darnoctheradiated9381
3 жыл бұрын
why is there nothing on the left hand screen when i get to 2:40, the UV EDIT section
@林煜航
2 жыл бұрын
me too
@Argyle302
Жыл бұрын
Before hitting "U", select your text again by dragging over it.
@shahidmasood4406
4 жыл бұрын
why you even making videos if you cant slow down a bit . none of your videos work for beginners . something is always missing , i have to pause this video and look for the commands which you dont even mention about
@S4NSE
3 жыл бұрын
yea it's really frustrating, especially if he uses shortcuts we can't see and it would be so easy to make a little animation to show us what buttons he pressed
@shakaama
4 жыл бұрын
well, this was too advanced for me. i'll subscribe when i'm more experienced with blender, like in a year or 2. it's not you it's me.
@amjadalinava
4 жыл бұрын
It depends on how much you are intrested. I learned to understand all his tutorials from only 5 days of watching videos. Not to offend you or anything !
@shakaama
4 жыл бұрын
@@amjadalinava I was kidding. and .... i'm a youtuber. i don't have feelings, so I can't be offended.
@zhampvlogs8149
4 жыл бұрын
when i click fill to none , my text vanishes
@RonaldBarnesJr
4 жыл бұрын
I’m having the same problem, did you find a solution?
@krsr454
4 жыл бұрын
@@RonaldBarnesJr Just increase your depth, like it was done in video.
@sharondsouza8054
4 жыл бұрын
in Bevel, Below geometry thats below the same page where your none option lies, go there (at bevel ) go to depth and increase it to your liking...increasing it from 0.00 to 0.01 would do
@zhampvlogs8149
4 жыл бұрын
Thanks guys
@henixx792
3 жыл бұрын
الله اكبر الحمد لله لاحول ولا قوة الا بالله اللهم صل وسلم وبارك على سيدنا و نبينا محمد
@mr.cringekid5117
4 жыл бұрын
No offense but you look like slightly Asian JonTron.
@burningbright2003
4 жыл бұрын
I really like your videos bro They are informative And interesting Keep on....
@TheDucky3D
4 жыл бұрын
Burning Bright thank you
@BiZ_z
4 жыл бұрын
I keep on having this problem when I use emission it doesn't glow. Do u know how to fix that?
@mandapallybalaji7542
4 жыл бұрын
Just increase strength of emission And turn on bloom in render settings
@vozcanyoutube
4 жыл бұрын
Go to render properties, activate bloom then change emission value. Render engine must be eevee.
@Argyle302
Жыл бұрын
Is there some way I can slow down the blinking? Mine is blinking at such a high rate of speed. Ugh.
@teamgt19
3 жыл бұрын
2 minutes in I had to quit. You're doing things so fast I have to pause.... google how to... then try and duplicate what you're doing. My head hurts. In fairness I am an old dog learning new tricks
@psbrede
4 жыл бұрын
I struggled for a while with the project from view leading to a UV unwrap that moved parts of the letters differently than in the video. Realized that I had typed "Neon" instead of "NEON". How would I stop this from happening if I wanted to use lower case letters? Thanks!
@UTubeJunky
8 ай бұрын
How come in his shader view the background is black, but in mine it seems to be blurred out greens and tan colors?
@calvinj.mccuien96
Жыл бұрын
how do i stop the uv light from beeing visible from behind because if i play the animation i still see the light from behind the letters
@christianbevel7273
2 жыл бұрын
I think this tutorial is easy for people who have blender knowledge i just downloaded and had to google nearly everything. T.T
@legendsofhollywu6517
Жыл бұрын
Im looking for someone to make something like this for my company. Im computer literate but i dont have the progrsms or time to learn to do this.
@jesperjee
6 ай бұрын
For some reason I can't insert keyframes. They don't show up...
@S4NSE
3 жыл бұрын
Sadly you explain nothing and it's really frustrating
@creacionespochitos5902
2 жыл бұрын
Sorry but the text disappears for me when I give none, you should use the mousse that everyone uses when they give a course
@dragonjosephs7240
4 жыл бұрын
this video is not sucks. i watched it over and over but you will never get the same outcome read the comments people are not getting the same outcome.
@henixx792
3 жыл бұрын
الله اكبر الحمد لله لاحول ولا قوة الا بالله الله اكبر اللهم صل وسلم وبارك على سيدنا و نبينا محمد
@dgil3704
4 жыл бұрын
Why is my sign red on blender but white after I render it?
@Goldenbridge-qj9rg
3 жыл бұрын
wow
@shitlessbaggle2704
4 жыл бұрын
I don't have " convert " when searching in F3 , any suggestions ( ANYONE please reply :\ )
@ovasiles
4 жыл бұрын
that's weird... you sure you can't find "convert in" ??
@chrome8664
4 жыл бұрын
I figured it out, you must select the object first. I was looking in comments to find it, but here you go :0
@yoitspeter8090
4 жыл бұрын
@@chrome8664 thx lmao
@Argyle302
Жыл бұрын
I think you just highlight your text, right click on it, and select the Convert To > Mesh.
@ivkinvideo
4 жыл бұрын
hi, man just real tank you for all this stuff that you've shared with us
@LaEstrellaProductions
4 жыл бұрын
just followed steps. quick and easy and I enjoyed it thanks man
@DigiMuaCreator
3 жыл бұрын
Good
@RockingMarshall
4 жыл бұрын
my keyframes won't work, nothing appears
@snezanavrbaski272
4 жыл бұрын
mine too
@alejandrovazquez3814
4 жыл бұрын
ive never used blender before, and you fligh over things way too fast, thanks for the effort.
@tobiasmunkes5576
4 жыл бұрын
He is rly but after all this isn't a beginner tutorial
@mikeypafu
4 жыл бұрын
Hi Ducky! Would you please explain why you uv projected the way you did ? With the zero scaling ? What does it serve here?
@TheDucky3D
4 жыл бұрын
Mickey Perry it makes it not show the whole texture on the object, just one pixel, making it look like it blinks, try it with a different texture coordinate plug and see how that looks
@t.a.n.i.s.h-00
3 жыл бұрын
I am not getting the neon effect.. pls reply asap/..
@lay3ks
2 жыл бұрын
I knw I'm late but do these steps apply to cycles ?
@Argyle302
Жыл бұрын
When I go to the UV Editor ( 2:38 ) on the left side, it just gives me a blank grid. No text there... ☹ PS - I had to highlight text again, BEFORE the "U" command. 😀
@ndutafernandes2062
Жыл бұрын
hey! any luck with this? I have the same problem
@Argyle302
Жыл бұрын
@@ndutafernandes2062 - Read my last sentence. You have to make sure it is highlighted before you go to the U command.
@DigiMuaCreator
2 жыл бұрын
Quick and simple 👏
@brendanclark4573
2 жыл бұрын
When I open my UV editing window nothing pops up inside it. It's just blank. Any quick fix for this?
@Argyle302
Жыл бұрын
Same here. ☹
@S4NSE
3 жыл бұрын
now half an hour later when I figured out which shortcuts you used because it didn't show up in the video I'm ready.. well, it didn't work, I put eevee as render machine, added material put it's surface on emission and nothing is glowing
@BrysonPrice
4 жыл бұрын
I thought it would be cool to animate the whole word on/off...I achieved this by moving the color ramp slider, but it doesn't' have a keyframe option. Any way around this?
@Bart_Depestele
3 жыл бұрын
hi amigo, how do I get this result on a transparant background please? as soon as i click on 'film/transparant' everything changes, please help
@aryan7479
3 жыл бұрын
what did he do just after that selecting emissions??
@cheesecakeandice
3 жыл бұрын
Hi! I hope I’m not too late but he changed the view mode to render which is in the top right corner under options, it goes from the full circle to the last one. I’m not sure what key is used because I’m a beginner but pressing on the circles will do just fine!
@mattpark86
4 жыл бұрын
What was that little sub menu you bring up 1:40 to select a solid colour? I can't get that. Thanks
@pussyslayer46
4 жыл бұрын
hold Z key
@mattpark86
4 жыл бұрын
@@pussyslayer46 Thanks very much
@yeison3697
3 жыл бұрын
You're going too fast man and i get lost
@blondeedition5107
2 жыл бұрын
my blender has a cube, not a text
@Cassthetic_Art_Official
4 жыл бұрын
for me when i search with f3 I dont see Convert to, what do i do?
@Milesatron
4 жыл бұрын
Instead select the text then click objects and covert to should be there
@harringtonday5319
Жыл бұрын
Compiling my top 20 go-to KZitem TUTs - you're def way up in there D3D! - Many thanks for your education:) There's a buzz I get when someone like yourself explains something in way that even I can understand, I love learning and understanding how things work. Short cuts/add-ons are great if you know your stuff, ie when in a production environment - can save time. But if you're learning I say, don't get too distracted with all the unnecessary add-ons - instead do the spade work in blender vanilla and understand how to get there/problem solving etc. In the long run you will save more energy and time than any add-on can provide.
@bonse2000
2 жыл бұрын
if i export this on unity it will work or not?
@HansSuzuki
2 жыл бұрын
Make sure you choose preview mode before change color, or it would not be visible as the default is solid mode
@nocturnalady05
4 жыл бұрын
Or in the header beside the add box click object then >convert to >then choose mesh from curve...ect.
@ElSpoon
3 жыл бұрын
Does Project from View not work with cycles in 2.9? When I select all my vertices and press U, no menu pops up. I've tried going into F3 and searching but nothing showed up. Also tried checking my key mapping in the settings and there was no UV Mapping keybind in the settings
@sukhanludhar6629
3 жыл бұрын
I have 8gb ram, 4gb 1650 Nvidia graphics card,will i able to make this project?
@hanqnero
4 жыл бұрын
I have a problem with the shader. Following the tutorial created same shader, but when i change the ColorRamp value, I see that letters are glowing or some of them are completely black. How can I fix this?
@Jesse-bn5xb
4 жыл бұрын
Nevermind,I found the easiest fix for the problem... clicking on the viewport. Bruh im dumb. Anyways good tutorial
@abigailg6263
4 жыл бұрын
Hey I’m using a Mac and when I press U nothing pops up. What other way would I be able to get project from view
@secretartist406
3 жыл бұрын
you can add drivers too
@solehb.1308
3 жыл бұрын
I can't find convert in my f3...
@alperkaraarslan277
3 жыл бұрын
me neither :(
@m-irfanafridi6460
4 жыл бұрын
Hey i have a question how did you color the texts separately LIKE the one showing in thumbnail(EASY NEON SIGN IN BLENDER) how did you color them separately plz i need to know
@crippledwhipcream4934
4 жыл бұрын
Hey, uh what should I do if hotkey for 'U' isn't working? I'm using Blender 2.9.
@edstepoff
4 жыл бұрын
OK Ducky. Common DENOISE DENOISE DENOISE for animation!!!!!!
@barryryan5187
4 жыл бұрын
I really appreciate the fast pace of your tutorials, thank you
@nikrogers123
4 жыл бұрын
2.8 2.81 the latest export obj with textures no way it does not happen so do you know what the updates are doing mtl files not recognised no texture import its happening because the old blender 1 file has been forgotten now you got mtl and apps cannot see it so word is copy textures into obj so no info o how to do it if you know about this please tell thanks
@baskarelumalai6679
3 жыл бұрын
How u set the selected tab color in the blender software.... the color was so beautiful...
@bladeless1382
2 жыл бұрын
i have a question, at 2:24 you say tilter key or tailor key or something like that, how can i do that
@jacquelinelmiller
4 жыл бұрын
Very cool!
@BLACK_TIGER_OFFICIAL
Жыл бұрын
Thanks
@Notbadslayer
4 жыл бұрын
I don't have "bevel" thing that appear below the geometry... can someone help ?
@mekaclaude
4 жыл бұрын
Can you showcase the process of vfx and video editing with Blender 2.8. I mean creating an intro, lower THIRD or something else in 3D and adding it to the timeline in VSE.... THAT WILL BE AWESOME!!!
@AngryAlien
2 жыл бұрын
How do I slow it down?
@dzomlamasina1560
3 жыл бұрын
I prefer cycles..but emission streinght.need to be much highter?
@Wzxxx
4 жыл бұрын
Why do unwrap and scale it to such dots???
@playblitz6274
2 жыл бұрын
im looking for a teacher who would teach me blender personally
@paulborstorf9538
3 жыл бұрын
Under the tab Scene you have to enable bloom in order to get it working properly! Good tutorial man!
@alirezaaliyan8495
4 жыл бұрын
you didn't mention that the bloom icon should be on. if it doesn't it won't work.
@colbyr2168
4 жыл бұрын
My text has black lines around it. Any suggestions??
@itronXD
2 жыл бұрын
bro thank u its fast and easy like i learned many things from this thank u again
@elBanndito
4 жыл бұрын
In version 2.80b after saving the frame for texture rotation. On the timeline and the graphic editor I don't see any markers for the rotated texture.
@Acrimusic
3 жыл бұрын
im using the emission material but it isnt glowing like that can someone help
@aravindmuthu5748
4 жыл бұрын
can you try to make oil lamps... I couldn't quite get the flame right
@sarangovintharaj4269
4 жыл бұрын
Hey bro there's a problem in my blender there is no screen cast keys how to I find them
@jasoncatlyn7331
4 жыл бұрын
Just what I'm looking for, thanks!
@TheDucky3D
4 жыл бұрын
Jason Catlyn glad to help
@pearlslegoandstories8097
4 жыл бұрын
not that bad
@erickrivera2425
4 жыл бұрын
for some reaon when i export my animation it doesnt come like the one in the thumbnail any tips?
@nikeairmaxneonledsign9945
4 жыл бұрын
Did you buy that led sign on neon factory shop?
@jammapcb
4 жыл бұрын
I cant get eveee to glow in my screen. Any ideas?
@ttles9335
3 жыл бұрын
I can't add keyframes to the timeline and there's no object in summary (in timeline). Some help? Thanks
@GaDawg84
3 жыл бұрын
Make sure you have your text clicked when you add your key frames to mapping
@dukunvisual7255
4 жыл бұрын
alah
@eddiec1999
3 жыл бұрын
How could I add a brick wall background to it
@MischiefOne
4 жыл бұрын
Love your tutorials thank you for your hard work and time puttin these together
@TheDucky3D
4 жыл бұрын
Mischief_Syndicate thanks man
@MischiefOne
4 жыл бұрын
@@TheDucky3D definitely dude I've been doing some of your tutorials for a minute now haven't really got all the way through life been kicking me in the teeth but 2020 will be different I'll be posting and tagging you and everything that I do that was your tutorial so keep your eyes peeled for those. Thanks so much for your hard work truly appreciate it
@TheDucky3D
4 жыл бұрын
Mischief_Syndicate have fun man
@prolon6776
3 жыл бұрын
please tell us what keys to press for the shortcuts
Пікірлер: 247