Incase you are not able to find the "single vert" option, you can enable it by activating the "Add Mesh - Extra objects" option in the preference. Edit > Preference > Add-ons > Add Mesh - Extra objects.
@faridafataliyeva8056
Жыл бұрын
thank you
@wy0202
Жыл бұрын
thank you !!!
@or8audio
Жыл бұрын
OMG thank you! Was so frustrated.
@ngocnhitruonghoang3436
Жыл бұрын
thank you so muchh
@olik_br
Жыл бұрын
Thank you sooo much
@CopyLion
Жыл бұрын
For those who can't get the liquid clear, despite tuning around the IOR of glass and liquid (more on that later), make sure you have enough bounces: in render properties -> light paths -> max bounces, set everything to a higher number e.g. 24 and you will see HUGE differences in your render. Many Blender rendering tutorials would suggest tuning down this number to say 4 because this doesn't really do much to opaque objects when bounces of light is down from 12 to 4 and light bounces takes a lot of time to compute, but this is glass is basically the exact one case you can't save any time by cutting down the bounces because this is all this object is about. The render will probably take much more time but trust me it will be very worth it. For IOR: it really isn't the culprit. IOR means index of refraction = how much light bends when going through this material from air. Clear glass (1.44) has a slightly higher IOR than water (1.33, beverages like tea or soda is slightly higher at 1.34), if you really want to get it VERY right, try adding a third material for the bubbles instead of reusing the glass material- those bubbles are air, with an IOR of 1. But! This is just a picture, so use any number you feel more accurate in the final result :) You don't really need to tune the material too much, for transparent materials like this, at surface instead of Principled BSDF, use Glass BSDF.
@klokke1541
Жыл бұрын
Helped me a lot with the parts that reflected in 'black' color. Now my glass catches all the lights and is tweakable to be perfectly clear. Thanks!
@chinmaypatil5242
Жыл бұрын
bro you are god
@clementmwangi464
Жыл бұрын
you are a genius🎉
@honeymwwn
11 ай бұрын
YOU SAVED ME THANK YOU SO MUCH🩷🩷🩷
@Zedrie
2 жыл бұрын
Wait, whaaaaa!? Single vert > extrude > convert to curves... and here I was taking the long way around a simple glass or straw shape but hammering it out from a cylinder, like a chump?? Game. Changer. Thank you for the FANTASTIC tutorial 😁
@polygonrunway
2 жыл бұрын
Those little things, right? :)
@hellfrozen3678
2 жыл бұрын
I'm an absolute beginner and honestly I was able to keep up with this tutorial which I didn't expect,cool video
@nictube5503
2 жыл бұрын
This guy knows how to grab your attention with just his thumbnails
@Villio.
2 жыл бұрын
Not clikbait if the thumbnail is same as content ;)
@ornulubeats
2 жыл бұрын
Everyone: nice tutorial easy to follow Me: WHy does the bevel not WoRK?!
@johnray854
Жыл бұрын
SAME EDIT: in your bevel mod go to geometry and turn off CLAMP OVERLAP, that worked for me
@StefTheCrystalGem
Жыл бұрын
@@johnray854 OMG THANK YOU!!! I didn't know why it didn't work so I just moved on with the tutorial and at the end I didn't understand why the shadows were glitching so thank you so much 😭
@MI-zt1wv
10 ай бұрын
@@StefTheCrystalGem FR i thought myi blender was buggin
@munibasarwer
3 ай бұрын
to add point in bevel , spin the round button on your mouse upward
@floret264
Жыл бұрын
Thank you so much for the tutorial. I'm a beginner and have been using blender for a week. This is the first tutorial I was ever able to fully complete and get a satisfactory result. Although it's not as good as you but I'm happy how it turned out. Thank you 😭. Subscribed! ❤
@polygonrunway
Жыл бұрын
Thank you for kind feedback!
@Master22062
2 жыл бұрын
Never thought of using the screw modifier like that..always using the "destructive" way, the spin tool.
@cjmaple2355
Ай бұрын
If you can’t find the “single vert” add-on under Add-ons and have Blended 4.2, it got moved to extensions. Just go to Edit > Preference > Get Extensions (then you might have to select go online) > Extra Mesh Objects > Install
@YouL1Que
Ай бұрын
thx a lot, u saved my life mate )
@mushu6366
2 жыл бұрын
This tutorial is great! The only thing that makes it a bit hard is that everything is really tiny and I can barely see what you're clicking.
@multiengineer9199
2 жыл бұрын
yes the screen was difficult to see , but anyhow may be sir work on it in future videos....,
@visioncorp5228
Жыл бұрын
Are you watching on a game boy color?
@ohimark
2 жыл бұрын
Another day, another slay 😌✨ I'm really satisfied with the result of my glass. Thanks to you I also learned a lot about blender. You're awesome😎
@polygonrunway
2 жыл бұрын
Glad to help! Thank you for kind words :)
@rominagesell5110
2 жыл бұрын
u are amazing! you have an asnwer for eventual issues, and that is insane!... you go right to the point and u don't waste time talking about things that are not related. I will for sure do every tutorial that u have! thank you so much!!!!
@polygonrunway
2 жыл бұрын
Thank you for the kind feedback!
@JackOfDigitalArt
Жыл бұрын
Just did this tutorial and even though I've been using blender for almost a year now I learned so much from it still! Thank you!
@polygonrunway
Жыл бұрын
Great to hear!
@midorafar2846
2 жыл бұрын
Man . I wanna thank you so much, You are the reason who gets me into blender ... 2022 is become better because of u and all of your lessons 💗 💗
@multiengineer9199
2 жыл бұрын
no matter how much tutorials and channels you follow, but he will always surprise with a new design and learning skills , knowledge, great sir , love the way you are teaching\
@polygonrunway
2 жыл бұрын
🙏🙏🙏
@Chlrintruc
2 жыл бұрын
This is amazing. I can make glasses of whisky, rum, brandy or even vodka I used this to make a tequilla shot glass. Just amazing.
@polygonrunway
2 жыл бұрын
Glad you like it!
@azwall8231
Жыл бұрын
I usually hate doing these tutorial because I have to do them for school but these ones are very fun keep up the good work
@zoomygloom
Жыл бұрын
when i apply the displace type (cloud) it doesnt effect the grid at all
@breakingmoody9902
Жыл бұрын
Just started blender few days ago. Thank you for your turorials which are detailled and easily to understand!
@silveruniverse1874
2 жыл бұрын
ama amazing channel, i love how the videos are so simple and straight to the point
@ortamatama5479
2 жыл бұрын
tried many tutorials but this is the only one that worked thank you so so much!
@polygonrunway
2 жыл бұрын
Glad to help! :)
@garrethclaw8875
2 жыл бұрын
Awesome tutorial, thank you so much!
@jaqueline321741
Жыл бұрын
Thanks for the tutorial, i have always problem with glass, this help me to understand better how this works 🥰
@STANY0307
Жыл бұрын
Hi, my normals are flipped of single very glass. I can't fix it, what should I do?
@louisrey-giraud1936
3 ай бұрын
awesome tutorial man, I was actually able to follow along and complete the render. Keep it up!
@polygonrunway
3 ай бұрын
Great to hear!
@karlcedricmanalo3089
2 жыл бұрын
Such a nice timing, im gonna make this now
@ilonkra8264
10 ай бұрын
I love your tutorials! Blender with You is so easy❤
@hedangerousv9315
Жыл бұрын
Nice, fast and with the details at the same time!
@mariabrevard5474
2 ай бұрын
If you are having an issue with the liquid not looking correct even after flipping the normals on the glass, try checking if your normals/faces are in the right direction. I thought it had something to do with the IOR too but turns out all the faces for my liquid were all red and facing inside the mesh instead of out. Select all the faces in edit mode and then click Shift + N. This should fix it.
@MidnightVixxy
Ай бұрын
In blender 4.2 you find the extra objects addon under the extensions tab above addons in preferences for anyone wondering. I was going mad trying to find that.
@debel5971
9 күн бұрын
7:22 CTRL + B press V to bevel and then scroll up. hope this helps
@erwintan9848
2 жыл бұрын
why my bevel doesn't work?
@subhamnath6997
Жыл бұрын
Something didn't add up. Your end product glass had a different shine and it was passing light all the way but the same didn't work out for me . Is it for the lighting or had u changed some settings?
@brettsle7561
Жыл бұрын
Thank you so much for the Tutorial! I learned a lot!
@AlvaroDevLabs
2 ай бұрын
Great tutorial, I learned a lot, how do you achieve the same colors as the render you show at the beginning, setting the color management to Very High Contrast and?
@polygonrunway
2 ай бұрын
Playing with exposure and then with RGB curves
@CyrilVincentMusic
Жыл бұрын
11:13 My glass is still opaque in my "materiel preview" when i click Screen Space Refraction, but it works on "rendered" preview. Any idea ?
@thinkusual
Жыл бұрын
same here
@richardtlabbe4959
2 жыл бұрын
This is cool. quickly figured out what to do. Thanks.
@kimumare6987
Жыл бұрын
Idk where i went wrong but i followed Every single numbers of yours but while i press z and render and did other changes as same as yours. The final result is not as that clear glass as yours it's more like disturbed glass and water i mean it's not so clear and perfect as yours. Idk what's wrong 😕
@saeedagha3127
2 жыл бұрын
Again with amazing tutorial Thankyou Keep it uo
@devasta9080
2 жыл бұрын
If you get ugly glass in the very beginning, having added the *Screw* modifier - *Ctrl* + *A* => choose *Scale* before.
@andreiardelean1576
Жыл бұрын
When i render the final, the glass cup is not showing in the render, i have just a floating water with cubes and bubbles inside. Why?
@mlsterlous
2 жыл бұрын
Love this channel. Only thing bothers me, is that super tiny interface. Even default 1.0 interface size in blender 3.2 is MUCH MUCH bigger on my screen. I know its problably because of your monitor and resolution, but still for us viewers its super uncomfortable for the eyes.
@jakelahr9280
2 жыл бұрын
so you're telling him to use a smaller screen, which is not going to happen.
@mlsterlous
2 жыл бұрын
@@jakelahr9280 why smaller screen? Just change interface size.
@therandomguys497
2 жыл бұрын
@@jakelahr9280 🤣
@feelcollins4358
2 жыл бұрын
@@jakelahr9280 you can change the interface size...
@midorafar2846
2 жыл бұрын
I was waiting for it ..you are always amazing
@polygonrunway
2 жыл бұрын
Thank you!
@CaCa-co4ec
2 жыл бұрын
can anybody tell me why when i click on flip on 13:30 it doesnt work its the same as it was before
@australopithecusbr
2 жыл бұрын
same here
@mustafamohammed9868
2 жыл бұрын
EDIT THE MATERIAL AND IRO
@lSqualol
2 жыл бұрын
Man created a glass in less than 1 min My jaw dropped...
@keziasoares177
2 жыл бұрын
Thank you for all the tutorials, can you please teach how to make a glitter effect in blender? Thank you!
@illustration315
Жыл бұрын
if lost on straw bevel points...use scroll wheel to increase points
@itb426_vardhanikajagtap5
Жыл бұрын
needed this...thanks alot
@ccsypee8287
Жыл бұрын
Thank you so much!!
@gordonbrinkmann
Жыл бұрын
I would enable the Merge option in the Screw modifier... otherwise you have a bunch of unconnected vertices in the center.
@FilmSpook
2 жыл бұрын
Thank you, Legend!! Trophy 🏆 💕
@fishyqills
11 ай бұрын
amazing, had a lot of fun.
@chelsiewei1232
2 жыл бұрын
Even after adding flip my water doesn't look right. Anyone know why?
@chelsiewei1232
2 жыл бұрын
I fixed it by reducing the water IOR... have no idea why though because 1.333 doesn't work for me
@mortyjenkins8046
2 жыл бұрын
Thanks i was having the same issue
@lesleyyu5930
Жыл бұрын
@@chelsiewei1232 That worked for me thx! I changed it to 1.1 and it looked good
@tuansenjaya1670
Жыл бұрын
Thank you so much for this tutorial!
@johanneskirestos5316
Жыл бұрын
The water isn't clear. I've tried to increase the total max bounces and it's still looks like mercury
@mr.cobalt1668
10 ай бұрын
For some reason my glass isn't fully transparent and has like a black coloration to it even though I set its color to full white.
@himuraq
9 ай бұрын
try increase the subdivision of ur model.
@bluebrain7009
6 ай бұрын
What if I render with Eevee. If I do so the glass blocks the liquid. How can I let the latter be shown through the glass?
@gbennem
2 жыл бұрын
Good tutorial !! Some comments: From physics point of view I missed adhesion effect of water w/ the inner side of the glass. Outer rim of waters top surface should be risen a little. The higher transparency property of glass & water than its of ice is not so shown as clearly as in my visual experience.
@elenasas7875
Жыл бұрын
Great tutorial 🔥🔥🔥 Thank you 😍
@KhabibakhonAbdurakhimova
2 ай бұрын
7:00 making straw with single vert, I was trying to do many times but my vert didn't extrude (( finally found the core of the problem - I was in Face mode not in Vertex mode hope this will be helpfull
@christopherschmidtke4752
2 жыл бұрын
Thank you so much for this great video!
@MohtashimHassan
9 ай бұрын
Amazing tutorial.
@Totorus
2 жыл бұрын
Great tutorial, thanks for sharing!!!
@Atknyldrmw
Жыл бұрын
This is perfect tutorial and ı tried it but when ı go to render seen , it is going to pixelase the model. I mean the image is too distorted. Doesn't come out smooth as yours. I don't know why :(
@imankhayyat3170
2 жыл бұрын
Love your tutorials
@SteelOcean6
2 жыл бұрын
when I flip the screw normal it doesn't change the model...I tried multiple times and nothing has changed...am I missing something?
@SteelOcean6
2 жыл бұрын
Nvm I fixed it...it was the liquid reflecting off of the glass
@SteelOcean6
2 жыл бұрын
@InfernoHawk if when you angle the camera and the liquid changes(what happened to me) then turn the IQR of the liquid down, for me, I changed it from the default to 1.100. You might need to adjust it past that but that's what made it more visible fo me
@klokke1541
Жыл бұрын
Awesome stuff! Thanks!
@polygonrunway
Жыл бұрын
Glad you liked it!
@tds_FrankOfficiel
2 жыл бұрын
you forgot to activate the shadow costics in the light parameter for see the caustics 😅 if you activate caustics on the material but not in the light you don't have caustics, apart from that good tutorial 👍
@polygonrunway
2 жыл бұрын
Damn! And I would swear I saw the difference while it was denoising :D Thanks for pointing out, I better cut that part out
@nosirve9458
2 жыл бұрын
can u explain slowly pls? Thanks for the tutorial tho, ima begginer and its difficult to keep up sometimes
@SvetlanaK_Sunday
Жыл бұрын
But the result in the end is not at all the same as in the preview. I'm upset. It turned out to be a glass and liquid and ice, but how to make such beauty as in the preview video?
@albakaz2345
2 жыл бұрын
wow; it's my next work, thx :D
@yuplusjin
3 ай бұрын
is it just me or do I see a hole below in mine in the beginning when I make cup out of vert...?
@Magna_Dragon
2 жыл бұрын
Thanks for the tutorial!
@jamesbrendan5170
3 ай бұрын
can you make a version with a far smaller cup (say, one with accurate/real-life measurements)? I tried out your tutorial, but I scaled my cup all the way down to be the same as the real-life measurements of a tumbler cup (so 3.75 inch/9.53 cm x 3.25inch/8.26cm x 3.25 inch/8.26cm for Z, X and Y-axis, respectively), and the result is that the modifiers didn't behave correctly at all - Displace ended up enlarging my ice cube to magnitudes bigger than the cup, messing around with the texture settings ended up with the ince cube not really having that wavy feel, etc...
@HungHoang-jc3if
5 ай бұрын
Really helpful
@zainnadeem8484
Жыл бұрын
thankyou so much for the tutorial
@_mrmafia
Жыл бұрын
13:33 i am apply screw modifirer in flip but water not show proper
@mrnkstlv
Жыл бұрын
I have this problem too! I'm sorry, but could you tell me what you did to make the water show properly? I understand that a lot of time has passed, but I'm doing this project now and it's not working out for me.
@beatrizbiancagalon8235
Жыл бұрын
@@mrnkstlv hi have u figured it out yet
@AnnoyedAlways2
8 ай бұрын
Please help, when I try adjust the Midlevel like you to get rid of the sharp corners, I move the Midlevel to the right as you do, but it only makes the sharp corners worse. They got inwards instead of outwards like yours. Please help. I followed this great video to the letter, what's gone wrong?
@SuperMan-ty5fk
Жыл бұрын
Can you please make a video on getting the fire/flame effect in blender?
@skullsarecute
Жыл бұрын
Add single vertice blew my mind. Then screw also blew my mind.
@just_npc5337
2 жыл бұрын
Obdivujem vašu prácu :)
@grimdesigns1233
2 жыл бұрын
Great tutorial, but I am having an issue with the bevel modifier. Tried it multiple times and nothing happens. Followed everything perfectly and cannot for the life of me figure it out.
@richie7624
2 жыл бұрын
Try using "merge by distance" in edit mode
@noahk3496
2 жыл бұрын
@@richie7624 tried that, It did nothing to help
@apebitmusic83
2 жыл бұрын
@@richie7624 That worked for me. DOn't know why it worked, but it worked.
@blenderpillow6013
2 жыл бұрын
Try to disable clamp overlap in geometry option of bevel modifier. Some close vertices might be collapsing. I haven't watched the video but same thing happens to me when I try to do some hard surface modelling.
@blenderpillow6013
2 жыл бұрын
@@apebitmusic83 Did you see any merge 'x no.. of ' vertices at the bottom? when you did that. It might have worked because you had some extra vertices which you merged by 'merging by distance'
@gloriabarberis8349
Жыл бұрын
HELP! I don't know what I did but the water doesn't look like that, I followed the step by step but it doesn't do the "flip" anyway. What am I doing wrong?
@余风-p2l
2 жыл бұрын
Nice💗 great tutorials!!!
@polygonrunway
2 жыл бұрын
Thanks!
@blandoworthlessness
Жыл бұрын
when I add the displace modifier my liquid rises 3 feet beyond the edge of the glass. Maybe because I made my glass to realistic scale?
@SonamSangpo
Жыл бұрын
These are great tutorials. I need to do this one again though, something wrong with the liquid not appearing properly through the glass. I must have missed a part
@jaamsblend
11 ай бұрын
I AM A BEGINNER. I NEED HELP. my single point vertices is too small to see and when i press E Z a blue line appears which makes it even harder to see my vertex honestly this tutorial was hard, voice was inaudible and somethings were small and hard to understand.
@saaj1974
Жыл бұрын
Thank you!!
@lefrenchcat7122
Жыл бұрын
at 7:38 , I can't find the convert to curve option Anyone know why?
@jaysinart
2 жыл бұрын
The outside of the liquid isnt smooth enough you can see the rectangles through the glass, You said it wouldnt be a problem how do i fix it?
@sreeharikrishnan4823
Жыл бұрын
Your Render looks really amazing! but after my render the liquid was not clear , kind of out of focus (Depth of field was not enabled) any suggestion to make it look as your render? Thanks for this tutorial
@yuvrajsinha3369
2 жыл бұрын
Very realistic 😱
@WINOLAofficial
Жыл бұрын
I love this tutorial, thank you so much! I have a question though; when I go into rendered mode, my liquid is black in some parts... it goes away when I "smooth flat" but then I'm left with a harsh pixly look. How can I fix this?o
@NgocLe-sh1cg
Жыл бұрын
can anyone help me pls. when i added the subdivision modifier, there was a black hole at the bottom of the cup. how can i fix it?
@no.name1731
2 жыл бұрын
my straw didnt bend like it should. I beveled it but it didnt bend.can someone help me?
@sol222
Жыл бұрын
i've got the same problem :(
@_mrmafia
Жыл бұрын
select middle vertex and press "ctrl+shift+b" and slow drag mouce and rotate scroll wheel Simple :)
@bohdankushnir3915
2 жыл бұрын
i love this
@jesudoss7795
2 жыл бұрын
Thank you sir
@Thunder_Star
Жыл бұрын
i couldnt get the liquid to smooth properly, other than that, everything went perfectly, great video
@vladisslave.7500
2 жыл бұрын
Nice tutorial
@rundown3D
Жыл бұрын
really usefull tut!
@cristiandavidruizsuarez663
2 жыл бұрын
Una pregunta... cuando voy a agregar el pitillo, cual es el paso que debo seguir luego de abrir mesh> single vert> single vertice? me quedo ahí y no me sale el vertice para realizar el pitillo. gracias. agradezco tutoriales tan bien explicados.
@cristiandavidruizsuarez663
2 жыл бұрын
Ou!, ya vi tengo que tener activado el selector de vertices en el modo edición gracias.!
@matthewchandler3930
2 жыл бұрын
@@cristiandavidruizsuarez663 Thank you! yes! vertex select has to be on in edit mode!
@yskji88
8 ай бұрын
everything is quick but great,, only problem i face is the render lighting is so dark
Пікірлер: 339