Did you notice something weird? I usually apply washes first, then add oil dots. OOPS! JK, it doesn't really matter.
@83DRIFTKING
5 жыл бұрын
good to know , i got myself a chi-nu and will use your tips and tricks!
@FinestBritishTea
5 жыл бұрын
cant be breaking the rules lol
@eternalASV120
5 жыл бұрын
Well, I personally prefer to apply washes after oil dots, because sometimes when you blend dots oil paint might cover washes. Quite difficult to clean it up from all gaps and etc. And the funny thing - despite of the lacquer (surface) type, I wait for about 10-15 minutes for thinner to evaporate, and then goes another layer of effects. What's the secret? Apply varnish :D Surprisingly, it doesn't affect previous layer of oil or enamel if the varnish is acrylic. Well at least it works for me))
@RubyKaneki
5 жыл бұрын
že ty hravaš wotko?
@RubyKaneki
5 жыл бұрын
urob TOG II
@mrtyalcnky4586
5 жыл бұрын
new video from martin, best day of the week :D
@jacobrichards8359
5 жыл бұрын
You had me at "living bananas". Great tutorial as always.
@teckweetan
5 жыл бұрын
I recently discovered your channel and can't get enough of your videos! So many interesting techniques. Are you going to setup a Patreon account? I'd definitely support!
@NightShiftScaleModels
5 жыл бұрын
Thanks a lot! I'm thinking about it, but I don't yet have a clear idea about tiers and rewards :)
@leanderjohnsen8339
5 жыл бұрын
Easily one of the coolest modeling channels in 2019 😍
@garymatthews3766
5 жыл бұрын
Another great one Martin.....cant wait for your next one, you have committed now ;-)
@alainvandenbosch2685
5 жыл бұрын
Friiiiiiiday... and with a new exciting Night Shift video.... Best day of the week of course 😍😍😍. Thank you so much for this very inspiring tutorial. You are my hero !!!
@bobwiber6125
5 жыл бұрын
Well, that has to be the first time I have actually seen anyone do the dot technique that I could actually understand, and follow. So, I suppose I need to dig out the oils, and see if I can actually duplicate the results.... although I will be working on a hulk at first. This definitely is a great channel, and I am learning a lot.... definitely love the weld seams and texture. Thank you for sharing...
@andrewschanck3363
5 жыл бұрын
Martin, my dude, every single technique you do is astounding! I also really appreciate that you explain every step. I now know why my dot fading has never worked well (I flood the surface with thinner) =P
@timothybogans3905
4 жыл бұрын
Andrew Schnack thank you for pointing that out, man i had the same problem but don't abandon the technique when you apply too much thinner with the oil dots it makes for great streaks and similar effects i love the filter washes but the dot filter technique is more direct
@Ablefaria
5 жыл бұрын
I have to say, as a long, long time miniature-wargamer/painter who's recently started applying modelling techniques to my painting (oils, enamels, filters etc.) your channel is fast becoming my favourote source for inspiration and tips! Keep up the good work and can't wait for the next video!
@tladrt48
2 жыл бұрын
All of your videos are the BEST. Well videoed, lighted, explained, etc. Thank you soooooo much. I am in very poor health and modeling helps me relax. I am building models to pass on as part of the art that I do.
@earltheartist3697
5 жыл бұрын
Always nice to see another night shift video and that sexy Eastern European accent. Informative and fun/ny
@soerenfeddersen3560
5 жыл бұрын
It is really enjoyable to view your videos. And adding your sense of humour, HAH! Boooom ;)
@junglelands9119
5 жыл бұрын
And to think I used to hate night shift, not anymore lol.....Great video.
@beklot
5 жыл бұрын
Watching the pin wash getting around the small details.... ASMR part of every paintjob! Keep rockin' it! 🖖
@charleswillis2509
4 жыл бұрын
Thank you for this very helpful and informative video. Great sense of humor too! Wish you were part of our model club. Cheers!
@hex1c
5 жыл бұрын
Love your videos Night Shift! I learn more from your videos than any other or magazines for that matter.
@disceva6443
5 жыл бұрын
You, good sir are in need of some of the fabled (liquid) green stuff. That stuff is fabulous to use.
@fidinboca
5 жыл бұрын
I do not know if someone has already said it sir, but its channel has become one of the best (If not, the best) modeling channels here in you tube. And I assure you that I do not like to praise in a simplistic way. Congratulations! I wish to reach soon the 300 thousand subscribers or more, which is the number of subscribers that has another fantastic modeling channel here.
@NightShiftScaleModels
5 жыл бұрын
Thanks a LOT!!!
@Durbandanify
5 жыл бұрын
Love your Channel man! Your voice and accent are perfekt and easy to the ear' you should dö podcasts 😁 Your toutorials are exelent and you tecniqes amacing. Thank you for a wonderfully proffesional channel.
@fzijlstra2906
5 жыл бұрын
Again a very good video! Btw, i grabbed a beer instead of some thinner. Tastes better i think 😋.
@FFFgoh
5 жыл бұрын
Absolutely fantastic! simply the best channel from youtube!
@robbo1068
4 жыл бұрын
Your channel is so entertaining!! Even if you're not a modeler!
@matus_wuki
5 жыл бұрын
Wow looks like from the photo. Great video as always. My friend started to watch your videos too. Btw my broken Fw-190 canopy glass is back in game! I contacted eduard support if they could send me another clear pieces. They said yes and they sent them. Now I can continue :D yay. If is anybody reading this from eduard I have to say THANK YOU to you!
@NightShiftScaleModels
5 жыл бұрын
That's great news! Awesome!
@reconmodelsvaughn469
5 жыл бұрын
I can't wait to see the wheels video
@pierre-olivierjanelle3413
5 жыл бұрын
Once again awesome video. I just got the remaining oil colours and can’t wait to start blending. I’m glad I have seen this because I would have done them one at at time...
@NightShiftScaleModels
5 жыл бұрын
That's also a way of doing it and there's nothing wrong about it! But hey, this way it seems a bit more fun and time efficient
@hl1796
5 жыл бұрын
OMG... thank you, thank you so much, there is so many video, guide talk about using oil dot paint.... but i never found anyone talk about how each color will influence or change the tone of base coat
@Flingwing24
2 жыл бұрын
Martin. Thanks buddy, bloody clever. Although I was with both aircraft and armour I am getting back into modelling aircraft after a few decades and your techniques and skills are inspired chap. Don't worry about the English. My Russian sucks and most of us can't speak English properly either😁
@jerryvolpini7987
5 жыл бұрын
Excellent tutorial! Always make me laugh 🤣
@FredWilbury
5 жыл бұрын
Amazing humour ...and of course nice paint technique....🚿😎...... regards Fred
@АлександрБарков-н8и
5 жыл бұрын
Martin, thanks for new model fun video!
@HobbyLinkInternational
5 жыл бұрын
Awesome video as always. Learned a lot!
@justins8484
5 жыл бұрын
Just found your channel these are some of the best models i have seen. Too bad im an aircraft guy but you make me want to try tanks now
@robwalker5030
5 жыл бұрын
Great vid Martin, that's some fast brushstrokes 🙃 Keep them coming 👍🏻
@Jagdpanzer-bh4pb
5 жыл бұрын
Your tanks always look so good! Great videos too ( the only videos I dont skip lol)
@terry35ish
5 жыл бұрын
Brilliant video as usual Martin.
@reconmodelsvaughn469
5 жыл бұрын
Awesome video brother keep up the hard work you are the best on KZitem on the planet
@SmallSoldier
5 жыл бұрын
Nice Martin. It's looking good so far.
@NightShiftScaleModels
5 жыл бұрын
Thanks Scott. Great job with that new video of yours.
@SmallSoldier
5 жыл бұрын
Night Shift thanks so much bud!!
@janisberger2364
5 жыл бұрын
I love it, helps a lot like allways
@Smilomaniac
5 жыл бұрын
From Polka Party Tank to Weathered Warmachine by Martin Kovac
@stabizisback
5 жыл бұрын
This channel is going to be huge
@justindavisphotography
5 жыл бұрын
Thanks for the great video. I am just trying to learn before trying on my first model and this is really helpful!
@chost-059
5 жыл бұрын
What a timing! I just got my first oil colours and was looking for a tutorial on them
@NightShiftScaleModels
5 жыл бұрын
What a great time to be alive!!!
@Boris_Eltsin
Жыл бұрын
Such a great video! Thank you!
@vladimirturop7145
5 жыл бұрын
gold hand !! Amazing !
@invalidtolive6764
5 жыл бұрын
Well...the bloopers remind me of being in school and doing a presentation in front of the class.
@cygnusx10
5 жыл бұрын
Top notch; learning (or shoudl that be re-learning?) a lot. Nice work so far; looking forward to next vid.
@danieljakl1915
5 жыл бұрын
got my glass of enamel thinner .. CHEERS!!
@NightShiftScaleModels
5 жыл бұрын
Cheers!!
@herrlogan17
4 жыл бұрын
Thanks for the tutorial :) i am in the procces of washing Tamiya tiger I early, and while there is not much to wash on lower deck, the wheels are quite time consuming (overall 36 wheels :).
@mattsullivan226
4 жыл бұрын
Martin, as many others have said, I think your videos are excellent and so helpful. I have a question for you. It looks like you sometimes apply acrylic paint techniques over oil washes and filters. Have you ever found this to be a problem? Do you use clear coats between the layers? I feel like I remember way back hearing that you can't put acrylics over oils. Thanks again for your wonderful videos
@kaneworsnop1007
5 жыл бұрын
Great video as usual! I only discovered your channel recently, but I've been watching a lot of your videos as the techniques you use are really good and I want to try them out for warhammer vehicles and possibly infantry.
@C1Rob1990
5 жыл бұрын
Again an awesome video! Thank you!
@Echo1Vyr
5 жыл бұрын
Imaš odlične tehnike i odlično ih objašnjavaš. Sub+like! :D
@CharlieO_
5 жыл бұрын
Brother, this is exactly why I think your next project should be a fantasy model - a robot of some kind (I think W.H.40K or Robotech) - it's because people who build, compete and judge these things need to see YOUR take on interpreting things like maintenance and environmental effects, how and what to add to a model, not to mention WHEN to leave the instruction's script in favor of your own, and especially, how to get the most realistic effects by not limiting yourself to just acrylics and a sharpie. (Whenever I see a kid on KZitem color something in with a red sharpie, one of my sea monkies climbs out of his included underwater environment and throws itself into the 'money' candle I vigilantly keep burning next to the roller coaster section of the 9 piece ocean zoo. We have to stop the madness!) So you see, it's not just for me, it's for the monkies.
@NightShiftScaleModels
5 жыл бұрын
Oh, well I guess I’ll have to do it then. For the monkies of course 🙉
@MrKersey
5 жыл бұрын
Great video as usual, thanks a lot!
@lightjaypanda3065
5 жыл бұрын
our-pour =) I just can't stop enjoying these bloopers =)
@timothyoffenbacher6190
5 жыл бұрын
Exciting!!! Like fine wine - getting better with age. Thanks for answering on your forum - much appreciated. If you were doing a three tone German camo late war what paint would you mix in to distress the base colour of Late War German Yellow - I'm using Mission Paints (similar to Tamiya's dark yellow...sort of). And for Red camo? Green camo? Would you distress an open fighting compartment like a Hummel or Nashorn? I'm thinking not however might be an interesting look. Thanks, Tim
@NightShiftScaleModels
5 жыл бұрын
That's a pretty interesting question. As for fighting compartments, I would probably add lots of distressing to the lower parts like the floors and lower half of the walls and keep it more "cleaner" towards the top. For distressing German yellow I'd just add white or light grey. Green and brown, hmm... adding German yellow could work, it would make them look more faded and would also work as a textured filter - it would slightly merge those 3 paints together.
@theagileaardvark
5 жыл бұрын
Thanks for another well done video :)
@이민호-d5z
5 жыл бұрын
Thanks martin !!!!😃😃😃😃
@lechar92
Жыл бұрын
Hello! Happy New Year to you!!! Thank you for all this amazing content 🙂 Please, as we are using enamel thinner, is it possible to use enamel paints (e.g. Humbrol) instead of oil paints? Thank you very much
@kurogiza
5 жыл бұрын
Please please please add the other oil paint tip! Loving all these videos
@linkkicksu
5 жыл бұрын
When it comes to varnish, I paint the base coat and camo, then gloss to apply water markings so they don't silver and to make pin washing faster, and then apply a matt coat to eliminate the gloss.
@NightShiftScaleModels
5 жыл бұрын
Blended oil dots knock the glossy finish down significantly, so they eliminate the need to apply another coat of varnish.
@CEGCsmite
7 ай бұрын
thanks for this tutorial. id like to know if there is a rule of thumb of what colors of oil paint you need for a specific color or tone. thanks !
@kinolios
5 жыл бұрын
Man everytime I see one of your videos it makes me want to get back to modelling! I really want to try those techniques on miniatures, especially the oil blending, the textures are really awesome! But something's always bothering me, they say to never put acrylic over oils, but I saw in some of your videos that you go back to acrylics for details after using oil washes and blending, without a varnish. Is it because the amount of oil paint you use is so low that it doesn't create problems? Or is it an overblown problem? Anyways, thanks for the videos, really enjoying them!
@NightShiftScaleModels
5 жыл бұрын
I guess it's like you said, their amount is very small. Might be also a bit overblown issue. Modellers have been doing it like this since I can remember (aka roughly since 2005) and there were never any issues reported in the modelling community. And hey, thanks a lot! I hope you'll give it a try and return to this hobby!
@winternightau
5 жыл бұрын
For the oil dots, are you thinning the oil paint first before applying? If so, how thin? Loving the channel btw!
@silvestersze4411
3 жыл бұрын
Lovely 😊 videos! For German ‘Dark Yellow’ distressing technique, which Tamiya paints would you recommend?
@martijnvanschie
5 жыл бұрын
Great video as always. I just did a pin wash on a model that was coated in Vallejo satin varnish and I get tide marks... I don't see that happening in this video and you mention you used a semi gloss coat. What could be my problem? Thanx in advance.
@NightShiftScaleModels
5 жыл бұрын
That's very interesting. I often had tide marks on matt surfaces, but never on a glossy or satin one. I honestly can't say what went wrong, but you can eliminate most of them by gently tapping the entire model with a large brush and small amount of thinner. Give the washes enough time to dry so you don't remove them. And also, there are many weathering techniques that can hide any remaining tide marks, like rust tones, dust, etc
@martijnvanschie
5 жыл бұрын
@@NightShiftScaleModelsThank for the advice... I also noticed that my base coat.... Done using Tamiya Olive Green... Was a bit rough and sandy... Something I have noticed before on my models. I'm now thinking that was the initial issue and that the varnish was not sufficient to form a nice coat and take away the rough edges... I'll try some different combinations on plastic spoons to test...you also use Tamiya with lacquer Thinner... I'm going to give that a try to. Thanx and ill be looking forward to you next video 😀
@FeeeshEP3
5 жыл бұрын
nice video Martin
@FinestBritishTea
5 жыл бұрын
this was really detailed :D
@JerryP7a
3 жыл бұрын
Yeah
@toothlessvortex
5 жыл бұрын
So apparently I will have to stop my King Tiger build (I am at chipping right now) and wait for your videos. They are so informative and right now I can see I fucked up a little with oils. Anyways keep up the good work!
@hobbyrookiee
Жыл бұрын
youre my hero 🥺🫡🫡🍻🍻🍻
@exyoff
5 жыл бұрын
The plane man 🥺
@Tobias611
5 жыл бұрын
Not sure if I missed it but a direct before and after at the end of the video would be awesome just to see the effect in action
@NightShiftScaleModels
5 жыл бұрын
Thanks for the advice! I'll start doing that whenever possible!
@donfrandsen7778
5 жыл бұрын
Martin. Really detailed and well done, excellent .thank you Please do a Soviet KV2 or JSU 152, or ISU 2 Rough Soviet armor , really enjoyed your video !!
@NightShiftScaleModels
5 жыл бұрын
Rough Soviet armor is my favorite! :)
@annanbejat1578
5 жыл бұрын
Nice techniques sir👍I'd like to do the oil dots blending technique on my gray painted tank, any advice for what colours of oil paint would look good for the dots blending on a gray tank?
@baroo89
5 жыл бұрын
hey Night Shift! Really cool material as always! But I do have a question. Could you please tell me if is it possible that after base colour, when I protected it by leyer of Vallejo gloss varnish and painted it enamel washes tneh they did not dry in 24 hours?
@Cake_Doge
5 жыл бұрын
Bro you read my mind? I had some questions about blending oils. I was just about to do random stuff with them
@silvestersze4411
3 жыл бұрын
Thank you 🙏🏻!
@scaleartsg
5 жыл бұрын
OUR POWER aka NEXT VIDEO срочно!
@MrPapamaci88
3 жыл бұрын
"Just sit back, grab your bottle of enamel thinner and enjoy!" That came out waaaaay too wrong! XD
@LEGOBubuS
5 жыл бұрын
"So sit back, grab your bottle of enamel thinner.." 😮 (12 seconds later) Me: spit out enamel thinner 😝
@Marauder623
4 жыл бұрын
Hey, night. What oil colours would you generally use for olive drab base colours? I plan to do a Pershing (m26 by Tamiya). I avoided doing the filters on my Sherman as i didn't want to mess it up because i did a good preshading with it (i was experimenting)
@halomov1
5 жыл бұрын
Sir, how do you clean the brush after using the texture effect process, the putty and cement residues? What and how to clean?
@krautreport202
5 жыл бұрын
He told me in the comments that he uses cement so clean the brushes. Works surprisingly well.
@ghostminipainting
5 жыл бұрын
@@krautreport202 Yep, this. I've just finished some Shermans up and used the same cement for the technique to clean the brush. Works great 👍
@polishmafia1573
3 жыл бұрын
Hi, I painted a model with Vallejo spray paint. I’m using oil paint and mineral spirits for this and realized the spirits is also stripping the base coat. Haha... is this the reason for a clear coat??!! I thought Vallejo spray paint was an acrylic?
@handznet
5 жыл бұрын
Tvoje videa jsou top, nedivim se ze rostes tak rychle ( tim myslim tvuj kanal. Kanal na youtubu) Spravny fun / serious business ratio. Po 20 letech si chci zkusit nejakej tancik, tak jsem sjel vsechna tvoje videa a je to parada. Odkud jsi, CR nebo SK, z prizvuku asi SK ?
@NightShiftScaleModels
5 жыл бұрын
Moc pekne ďakujem! Jo uhádol si, som Slovák :)
@chrismontgomery1386
4 жыл бұрын
Wow this was nearly a year ago, Do you Thin the oils down at all? They look quite thin when you apply the dots to the model, do you allow them to dry on the model before you start to blend them?
@mosttriumphantco
2 жыл бұрын
I'd love to try this technique but the Wilder weathering oils seem pretty hard to get a hold of- is there an easier to find alternative?
@loupiscanis9449
5 жыл бұрын
Thank you
@generic_asian_
5 жыл бұрын
I've just bought some Mig wash and tried to use it but when I removed the wash with enamel thinner the paint also came off. Do you know what I'm doing wrong? I'm using Tamiya Acrylic paints with no varnishes and Revell Colour Mix.
@Dreg0
5 жыл бұрын
From your point of view, is there any difference between Wilder or Abteilung brands in comparison with ordinary decent oil paints?
@NightShiftScaleModels
5 жыл бұрын
Well, they make specific tones we, armor modellers use, i.e. rust, mud, dust etc. When I was using regular oils I always had to mix them to get those tones and it was often tricky. These modelling oils also contain less linseed oil so they're not as messy and are easier to work with.
@taco6658
3 жыл бұрын
Where do I buy wilder oils because I can’t seem to find the website.
@quantumplastic
5 жыл бұрын
Muito bom! Obrigado pela partilha ;)
@Orkduck
5 жыл бұрын
I'm watching the video well. Do you want to make images using lacquer series or enamel paint? I think you are mainly using acrylic series ^^
@NightShiftScaleModels
5 жыл бұрын
I mainly use lacquer paints for airbrushing because they're easy to work with and are durable when oil and enamel paints are laid on top of them :)
@Orkduck
5 жыл бұрын
Night Shift Thank you for your answers. ^^
@x3tc1
5 жыл бұрын
Help, I am trapped in a wash applying/removin loop for 3 months now! D:
@a.ward02
5 жыл бұрын
Its so upsetting because i really want more videos from you as their so enjoyable to watch, however as a fellow modellor i know you cant rush these things😣😂
@Musstrafaccatrator
5 жыл бұрын
Cool job! Can you make Warsaw uprising panther in future?
@NightShiftScaleModels
5 жыл бұрын
Hmmm, maybe
@Musstrafaccatrator
5 жыл бұрын
@@NightShiftScaleModels will be cool and in this year is 75 anniversary of Warsaw uprising.
@scottroby9444
4 жыл бұрын
In the past, I've had issues with tide marks left over from the washes. What can I do to help prevent those tide marks?
@010falcon
5 жыл бұрын
Hello night shift I am quite new to this I am right now 3d printing a LT 35, i want to make it look nice It has to be sandet a lot, What is the most important thing you recommend me to buy. Greetings my friend Btw. Can you link everything you use in the vids, would be quite usefull Edit: Thanks a lot btw. (How rude of me)
@eternalASV120
5 жыл бұрын
Sounds like a cool project. What kind of printer are you using? Guess the most important thing will be tons of putty to get rid of printer lines))
@010falcon
5 жыл бұрын
eternalASV120 well then I am actually using sandpaper to get rid of the lines (the lines are almost not visible) Now i have the good ol ender 3 It is a FDM 3d printer If you want it for printing models buy a SLA or SLS (if you have enough money) I bought my printer in mind if printing for customers and for my electronics projects I loved these small things when i was young, so i thought why not get into this hobby
@NightShiftScaleModels
5 жыл бұрын
I don't have any experience with 3D printing, but from what I've seen on KZitem, using spray primer/filler can eliminate most of those printer lines
@010falcon
5 жыл бұрын
@@NightShiftScaleModels thats cool because the LT35 had bolts (these bolts are on the actuall model that i printed) If you see a nice modell on thingiverse and you want it printed you can ask me
@limenoalikyoboi9230
5 жыл бұрын
The oil paints are just your classical good ol' paints used in school art class or are they special for this?
@NightShiftScaleModels
5 жыл бұрын
These are modelling specific oils, but regular can be used too. However they contain lots of linseed oil, which has to be drained prior to using them. You can squeeze them out on a piece of cardboard and let it absorb the oil
@BushPigADV
5 жыл бұрын
Are the oil paints for modeling specifically or just generic artist oil paints?
@NightShiftScaleModels
5 жыл бұрын
These are scale modeling specific oils, but generic oils can work too. They just contain a lot more linseed oil which has to be drained first, and of course, usually don't come in colors that we, modelers, use.
Пікірлер: 181