Truly a work of art my friend. I actually own 7 crawlers/trail trucks but you convinced me to also go back, and to start collecting these amazing cars. With Tamiya, you can never go wrong. I subscribed to your awesome channel.
@RCKickschannel
Жыл бұрын
Welcome to RCKicks 👍🏻👍🏻
@rcgeneration824
Жыл бұрын
@@RCKickschannel thank you sir. Greetings from Texas.
@rcicons4915
Жыл бұрын
Nice work Gav. I actually just started using an airbrush because I am tired of flooding bodies. Literally use no paint with an airbrush. Appreciate all the tips and thank you for the longer video. I know the analytics don’t like the long ones but we sure do.
@GavinEvans1
Жыл бұрын
www.youtube.com/@GavinEvans1
@jayhow997
Жыл бұрын
A compass cutter is handy for arches, you can score cut up to an snap or can get one one perfect circular cut . Even if the arch isn't perfectly circular set up the compass to cut the highest point of the arch which leaves some small area to trim either side which is easier as you don't have to try get scissors at a weird angle at the top of arch.
@michaeldorich4485
Жыл бұрын
This is a fantastic instructional video. Thanks a lot.
@GavinEvans1
Жыл бұрын
Hello, fan! 🔝🆙🆙 Thanks for reaching out congrats 🎁🎊🎉You Won a Prize Cheerful send a text to me on telegram to acknowledge your prize🎁
@StevieWonder1979
Жыл бұрын
Oh wow. I had this car when I was a teenager
@RCKickschannel
Жыл бұрын
Did you finish building it? It’s a bit of a handful I must say.
@stewartlewis3503
Жыл бұрын
Great video. Guilty of being one of those who doesnt go back to old 'how to' videos.
@kenblockx2010
Жыл бұрын
Well done Gavin, nicely done👍👍👍👍
@kennychristie4310
Жыл бұрын
Fair play Gavin. That is alot of work. I thought it might have been decals! Old Skool Tamiya were not easy!
@barrycheesemore2928
Жыл бұрын
You've made a damn good job of that Celica, much better than I could have managed. Nice one!!
@KaiCityRC
Жыл бұрын
Thank you for this! Some great tips that will come in very handy when I paint my next body. 👍
@GavinEvans1
Жыл бұрын
Hello, fan! 🔝🆙🆙 Thanks for reaching out congratulation 🎁🎊🎉You Won a Prize Cheerful send a message above to acknowledge your prize🎁
@agevan6735
Жыл бұрын
Great vid, cheers mate!
@TottiSchlecker
Жыл бұрын
This is some great value content right there 🫡
@kashmurray1199
Жыл бұрын
Vary challenging. Still looks great. I couldn't do better. That's my favorite Tamiya chassy.
@GavinEvans1
Жыл бұрын
Hello, fan! 🔝🆙🆙 Thanks for reaching out congratulation 🎁🎊🎉You Won a Prize Cheerful send a message above to acknowledge your prize🎁..
@yellomello71
Жыл бұрын
Nice paintjob. It's always a pleasure to watch you doing it. Even with a little experience I can still learn something. Very cool.
@GavinEvans1
Жыл бұрын
www.youtube.com/@GavinEvans1
@tm5123
Жыл бұрын
Feels like Gav is getting closer to the camera with every video. 😆 Ta01 celica looking gorgeous!
@RCKickschannel
Жыл бұрын
You love it ;)
@n22pdf
Жыл бұрын
You’ve mad a lovely job of this looks brand new awesome job 👍🤩🚴🏅
@GavinEvans1
Жыл бұрын
Hello, fan! 🔝🆙🆙 Thanks for reaching out congrats 🎁🎊🎉You Won a Prize Cheerful send a message to me on telegram above to acknowledge your prize🎁
@checky2349
Жыл бұрын
Seriously good video. I got the worst ghosting on a Tamiya Toyota Gazoo Yaris! Your Celica Looks so good
@mitsuman5555
Жыл бұрын
great tip about using the thin masking tape on the outside as a guide for masking the inside
@GavinEvans1
Жыл бұрын
Hello, fan! 🔝🆙🆙 Thanks for reaching out congratulation 🎁🎊🎉You Won a Prize Cheerful send a message above to acknowledge your prize🎁....
@roloreoandy9867
Жыл бұрын
Your tips and tricks are brilliant Gavin! Thanks!
@GavinEvans1
Жыл бұрын
Hello, fan! 🔝🆙🆙 Thanks for reaching out congratulation 🎁🎊🎉You Won a Prize Cheerful send a message above to acknowledge your prize🎁......
@randomrodent9124
Жыл бұрын
Nice paint job. The car will definitely look good on display on the shelf.
@GavinEvans1
Жыл бұрын
Hello, fan! 🔝🆙🆙 Thanks for reaching out congratulation 🎁🎊🎉You Won a Prize Cheerful send a message above to acknowledge your prize🎁...
@ryanhuckins6669
Жыл бұрын
❤love it.. one of my favorite bodys... so happy tamiya is coming out with pre painted body because my painting skills are horrible lol
@prophetate
Жыл бұрын
What an awesome editorial video ❤ I have learnt so much watching your build and paint videos, and feel I get better and better for each kit 😊
@GavinEvans1
Жыл бұрын
www.youtube.com/@GavinEvans1
@aidanalunan56
Жыл бұрын
Great video on body painting!! Your masking tip is the same as what I do too 😉 Would be great to see more of this type in the future as doing up bodies is always a challenge. More tips and perhaps showing more of the techniques used would be very helpful too!! 👍🏻
@RCKickschannel
Жыл бұрын
I think you will like tomorrow video on the full Pro Cat build and paint
@duncanmarriott2052
Жыл бұрын
Beautiful !
@RCACTIONAUSTRALIA
Жыл бұрын
Nice work Gav 😎
@merijn1975
Жыл бұрын
Great video Gavin! What a job, but it's a beauty!
@GavinEvans1
Жыл бұрын
Hello, fan! 🔝🆙🆙 Thanks for reaching out congratulation 🎁🎊🎉You Won a Prize Cheerful send a message to me on telegram above to acknowledge your prize🎁
@bjornhaarbusch9534
Жыл бұрын
Super Arbeit 👍👍👍 sieht richtig gut aus die karosserie gute Arbeit.
@GavinEvans1
Жыл бұрын
Hello, fan! 🔝🆙🆙 Thanks for reaching out congrats 🎁🎊🎉You Won a Prize Cheerful send a text to me on telegram to acknowledge your prize🎁....
@bleedinghandshughes
Жыл бұрын
good job, looks like a Marlboro packet
@AddamsPlayground
Жыл бұрын
Sometimes the simplest looking paint jobs can be some of the most difficult ones!!
@RCKickschannel
Жыл бұрын
100%
@Vimeous
Жыл бұрын
Great job! Recently finished the paint on a GR86. Took weeks to get the masking right but got there in the end. Feel your pain on this one.
@GavinEvans1
Жыл бұрын
Message me on Telegram I have a package for you
@brianargo1659
Жыл бұрын
The black strip on the doors can the whole thing be put on and the square decal with the number 2 on it be held up to it and used to mark the black strip for cutting out that section so to remove it and them stick down ur number plate. That way u get ur door jam cuts in the right spot?
@lo2713
Жыл бұрын
Great work Gav, the GT4 is one of my fave rally cars, i need to do an escort cosworth in repsol colours, but as im going to run it in the iconic cup, i wont be doing it to this level of detail. Will get trashed 😂
@GavinEvans1
Жыл бұрын
Hello, fan! 🔝🆙🆙 Thanks for reaching out congratulation 🎁🎊🎉You Won a Prize Cheerful send a message above to acknowledge your prize🎁.
@erhanuzdilli9788
Жыл бұрын
Bloody friggin fiddly isn't it...???? It looks smick.... Thanks for prep work.
@escos0410
Жыл бұрын
Gav I keep saying learn to use a air brush. I do all my cars with one, doesn’t have to be a expensive set up for RC body’s but trust me the results are way better than a rattle can when your doing detailed parts esp the amount of masking not needed Top job still looks 💯😍👍
@RCKickschannel
Жыл бұрын
I have two already. The issue currently is I don't have a location to use an airbrush.
@tonygregg6957
Жыл бұрын
I thought I'd made a mistake and cut the mudflaps off but you've done the same. Not sure if they should be on or not, but I might get another body and cut less off the arches
@GavinEvans1
Жыл бұрын
Hello, fan! 🔝🆙🆙 Thanks for reaching out congratulation 🎁🎊🎉You Won a Prize Cheerful send a message above to acknowledge your prize🎁..
@RCeveryday
Жыл бұрын
Amazing work! If you want to part ways with that original body Id love to add it to my collection.
@Foldingblade
Жыл бұрын
i still have one of these XD
@RCKickschannel
Жыл бұрын
XD is the way to go lol. Same for the Fat Fox.
@durbar546
Жыл бұрын
I used to use the cheap masking for the rest of my bodies and never again id rather pay more for tamiya masking and just use that all over but still looks great
@rorythetiger5198
Жыл бұрын
Hi gav.... what's the best method you've found to sand bodys after cut out. Cheers
@GavinEvans1
Жыл бұрын
Hello, fan! 🔝🆙🆙 Thanks for reaching out congrats 🎁🎊🎉You Won a Prize Cheerful send a text to me on telegram to acknowledge your prize🎁.
@alfredyost7972
Жыл бұрын
I have a Tamiya Toyota Celica R/C car. My car has a much newer chassis. I also got a Tamiya pre-painted body separately. I did not think that I could paint a body like that. Thoughts?
@RCKickschannel
Жыл бұрын
This kit was released twice and the second version came out on a newer chassis. You can find info about it on Tamiyabase
@alfredyost7972
Жыл бұрын
@@RCKickschannel Thank You
@checky2349
Жыл бұрын
What’s the go with that mechanical speed controller? That looks so vintage!
@RCKickschannel
Жыл бұрын
It's a restoration.
@checky2349
Жыл бұрын
@@RCKickschannel sorry, just interested
@radicalmarxist9909
4 ай бұрын
This looks like such a pain. That’s why is stick to pre painted bodies.
@blitzrc4713
Жыл бұрын
I'd love to see a video of your parts bin?
@RCKickschannel
Жыл бұрын
One day
@RcCapitalFun
Жыл бұрын
Paintkiller from carson will help .. next time
@GavinEvans1
Жыл бұрын
Hello, fan! 🔝🆙🆙 Thanks for reaching out congratulation 🎁🎊🎉You Won a Prize Cheerful send a message above to acknowledge your prize🎁..
@stumpycatvm7115
Жыл бұрын
not buying another Tamiya kit until they start making Touring Super Slixks againg
@GavinEvans1
Жыл бұрын
Hello, fan! 🔝🆙🆙 Thanks for reaching out congratulation 🎁🎊🎉You Won a Prize Cheerful send a message above to acknowledge your prize🎁
@stumpycatvm7115
Жыл бұрын
@@GavinEvans1 hello thanks
@RCKickschannel
Жыл бұрын
@gavinevans1 isn’t me.
@mikestansbury2510
Жыл бұрын
you are way more patient than i am. even with the small flaws it looks amazing. if it looks good from far away, i am happy with it since i burn out and fly before anybody can see my weak paint job anyway! when i was a kid, tamiya had paint markers that made the edging a bit easier, so I used those things. haven't seen them in a long time, but i think they were a bit hit or miss anyway, which is probably why i don't see them anymore. still they helped me out a lot especially in the corners!
@RCKickschannel
Жыл бұрын
I wish you could still get the paints and pens as it helps sometimes.
Пікірлер: 81