This is hands down the best xj blower motor video on KZitem
@Lochlee
Жыл бұрын
Thanks! I'm glad it helped you out.
@leograzer2632
7 жыл бұрын
you should continue making these how to videos for jeep xjs there are not a lot of them that are this well made, or explain as clear as you did.
@Lochlee
7 жыл бұрын
I'm Glad you like it! Love to help out. There will be an extensive series at some point. The old girl has 220K miles now and needs some serious maintenance :D Thanks for watching.
@leograzer2632
7 жыл бұрын
I have a 96 Cherokee classic with 174K miles my self I haven't been able to drive it in years but I've been trying to fix it when I can so I'll be looking forward to any new videos
@percybaldwin216
5 жыл бұрын
If I can put it in anyone can. This video is well put together and a moron like myself can pull it off. Thanks.
@percybaldwin216
5 жыл бұрын
Great video and keep making them on this jeep. Sence of humor is terrific
@sorenmiller3110
20 күн бұрын
My 92 has 305.000 just put a 99 4.0L in it. Temp sensor was a issue but figured it out. Love your videos man🍻👊
@YellowCheapers
4 жыл бұрын
It pleased me when you pointed at me specifically when you told me I could do it myself.
@AZdirtdog
6 жыл бұрын
I did exactly as the video says and I still have a wobble at freeway speeds
@taylorbrittain9425
5 жыл бұрын
😂
@Katarinarabbit
4 жыл бұрын
😂 jeep life
@Katarinarabbit
4 жыл бұрын
I did everything and my engine still won't turn
@tonymaccaronio4304
4 жыл бұрын
SIMPLE HUMOROUS AND INFORMATIVE, EVEN FOR A 38 YR TECH. GREAT JOB.
@laineymel
7 жыл бұрын
Best "how to" video I've seen for replacing a blower motor! Thank you!!
@Lochlee
7 жыл бұрын
Glad I could help. Thank you for watching! :)
@grant2053
6 жыл бұрын
Does your XJ have good powerful air? Because mine is weak as hell and the motor chirps when it turns off like bad bearings. Thinking about replacing.
@Lochlee
6 жыл бұрын
Sounds like that would be a good idea :)
@dennismchugh2699
7 жыл бұрын
Hands down the most entertaining instructional video I've ever watched even my kids, bored to death with my Cherokee talk, watched in silence waiting for the fan motor finally. My bird chatter will soon disappear and I can again bore them with Bass fishin talk,Thanks.
@johnmcmahon5967
3 жыл бұрын
This video was helpful, but it is in need of help. Number one: yes, the blower motor is behind the windshield washer fluid tank (reservoir), but it is not where the narrator was initially pointing. Number two: the three "bolts" are actually course-pitch metal screws. On a 1996 model year Jeep Cherokee XZ 4.0L, you'll need a 1/4" socket/wrench to remove these screws (not 8mm). Note: the vent/drain hose for the blower motor does not require removal in order to extract the motor/fan wheel assembly. The plastic fan wheel is not made of cheap plastic, but might be brittle due to age and heat.
@amberdawn2594
5 жыл бұрын
Thank you!!!! For someone who is attempting DIY fixes with ZERO car mechanics knowledge, your video is a dream. You show every bolt, tool , placement, product etc very clearly where other videos just quickly brush over these things assuming we know what they're talking about it. I can't tell you enough how much I appreciate your attention to allll the details needed in this fix and show exactly where things are located and where i should be looking. Please make videos of all your fixes. :)
@Lochlee
4 жыл бұрын
Thank you so much for watching, glad it helped out!
@AudioFreqx
2 жыл бұрын
A good overview though Tool Control and general inspection tips as you go are not covered.
@AudioFreqx
2 жыл бұрын
Good stuff! *Blower motor resistor controls the speed. Ring and pinions can be done DIY too.. ymmv
@DavidToppMelanieScot
4 жыл бұрын
Love this video! The sound effects and humor are awesome and the instruction is top notch! Your explanations and the way you shoot the video is some of the best I've seen on auto repair. Thank you for this one. It's extremely helpful!
@Lochlee
4 жыл бұрын
glad to help out! :)
@AudioFreqx
2 жыл бұрын
Seems like he has taken a few pages from the Complete Idiot Guide by John Muir. Some of us need a simple overview.. others need much more. Well done
@bubbachase7874
3 жыл бұрын
Definitely the most clear instruction vid I’ve watched
@Lochlee
3 жыл бұрын
Thank you! And thank you for watching :)
@TheTechnicalWizard
2 жыл бұрын
Very detailed and well explained. Thank you for this! Please do more Jeep Cherokee videos!
@Lochlee
2 жыл бұрын
I would but I no longer have the Cherokee unfortunately. 77 J20 is the next project. Thanks for watching, and I'm glad to help out.
@joshuadurham325
2 жыл бұрын
On the 1990 jeep Cherokee with 4x4 and abs all the abs stuff is where the washer fluid is other than that it’s pretty similar
@CarlBass100
3 жыл бұрын
Very good explanation. Sound effects also good :)
@Lochlee
3 жыл бұрын
Thanks for watching!
@HopWorksET
5 жыл бұрын
Have a 98 and it's a bit different, but man I love your style and especially the overdubs!! Thanks for the video!
@Lochlee
4 жыл бұрын
Thank you for watching :) Glad you liked it.
@nathanmac4979
2 жыл бұрын
Did you have the evap canister in way?
@grfd711
Жыл бұрын
Thanks for the video. I have two XJ's, a '96 & '01. There's some slight differences and my '96 needs the blower motor replaced. I didn't expect to have to loosen the fuse box holder or disconnect the hose on the motor, but I know now going into it.
@Lochlee
Жыл бұрын
Glad to help out!
@grfd711
Жыл бұрын
@@Lochlee Actually in the middle of this project as I comment. My replacement motor doesn't have the hole for the hose to hook to. Is that a big deal?
@Lochlee
Жыл бұрын
@@grfd711 I'd say it's most likely fine. Might be a new design.
@grfd711
Жыл бұрын
@@Lochlee installed and working great! Thanks again.
@Lochlee
Жыл бұрын
@grfd711 that's awesome! Glad to help out.
@progunone4105
4 жыл бұрын
EXCELLENT VIDEO! I agree with the comment below from "Leo Grazer," you should make more of these videos for various fixes needed on 1990-1993 Jeep XJ's. Your clear and precise instruction, on every aspect of the job at hand, was perfect. I can't applaud this enough!
@Lochlee
4 жыл бұрын
Thanks!
@DTLondon666
7 жыл бұрын
Perfect explanation, especially for beginners. Thanks! You did forget to tell the viewers to reattach the hose to the fan motor, though! Might wanna add that on the screen.
@2thumbsup247
6 жыл бұрын
he did mention that though at 10:07
@LordLancifer
7 жыл бұрын
If i was rich, I'd hire you to narrate my life! :D Great video too!
@chriscoates1046
5 жыл бұрын
Looks fairly easy, is there a inside access to the blower because my blower runs but sounds like a pen rubbing the blower fan or squirrel cage and if this can be accessible from the interior?
@pleasemyibefrank
5 жыл бұрын
The motor housing you removed had a rubber gasket about 1/8th" thick. However, you didn't install a gasket with the new motor & housing. I am installing the same motor and fan right now and the motor came with a replacement gasket. The new gasket they have adhering to the backside (toward the front of the Jeep) of the housing. It doesn't sit flush on either side. Makes no sense to me to even have one. I guess you think so too, or...did you just overlook it and didn't include the part with swearing and sweating your way through the second installation? :)
@wortnot
6 жыл бұрын
WOW! What a well-made video. Please keep making these! Especially for little electrical things. There's not a lot out there and XJs are pretty prone to those kinds of issues. Thanks!
@Lochlee
6 жыл бұрын
Thanks for watching! :)
@kornucopia9460
5 жыл бұрын
Just did this on a 1999 Cherokee Sport XJ. It was significantly more difficult than this because the Freon accumulator bottle was immediately in front of the blower fan. There's also some hydraulic-looking thing in the corner of the bay right there. Sorry I have no idea what this thing was. It seems like there isn't going to enough room to be able to get the fan out but with some determination it is possible. You have to undo the bracket holding the accumulator bottle and then there's a silver clip on the hard line that you can remove that will allow you to rotate the accumulator bottle somewhat. There's also a evap purge control valve there that can just slip off of its mount to be pushed out of the way. Remove the hydraulic thing bracket in the corner and rotate it out of the way. Also had to remove the nuts for the fuse box to make just enough room to be able to remove and replace the blower... I'm not sure but on the TYC replacement I got from amazon I also had to clip one corner of the 3 mounts (lower right) to be able to fit it back into the firewall. Everything is back up and working though... saved me about $250.
@kendean6367
7 жыл бұрын
Another tip would be to go ahead and clean the plastic blades before putting back on new motor. Good video though!
@LsToner
2 жыл бұрын
Excellent video even for a guy that is fairly green when it comes to working on my own vehicles. Thank you!!
@Lochlee
2 жыл бұрын
Glad it helped! Thanks for watching :)
@budjohnson8053
2 жыл бұрын
Thanks this was the best Instruction video I’ve seen on KZitem it was enjoyable and informative thank you
@Lochlee
2 жыл бұрын
Glad I could help out! Thanks for watching 🙂
@krwiles
5 жыл бұрын
Excellent illustrations and socket size descriptions. Bravo good sir, Bravo!
@gwangyonglee3230
Жыл бұрын
Thank you for the detailed explanation.^^ 자세한 설명 감사드립니다.^^
@7shocker
4 жыл бұрын
Sounds like he took an anger management class and passed with flying colors 😂
@brooke_5280
3 жыл бұрын
One of the most helpful diy videos I’ve seen, thank you!!
@Lochlee
3 жыл бұрын
Thanks for watching! Glad to help :)
@joelbread5858
7 жыл бұрын
awesome video! like the sound effects. watched a few on this that do not show the whole process, thank you!
@Lochlee
7 жыл бұрын
I'm glad I could help out! Thanks for watching! More coming soon, with better sound quality! :)
@kristiancampbell1170
3 жыл бұрын
Thanks for the help! Saved alot of money doing solo.
@Lochlee
3 жыл бұрын
Glad to help out! Thanks for watching!
@jennytucker6363
Жыл бұрын
Thanks for the informative video ❤️ great speaking voice!
@Lochlee
Жыл бұрын
Thanks for watching! Glad to help out 😀
@zh9119
3 жыл бұрын
Thanks for your video Lochlee and thanks for remind me my childhood when I was watching "Trick & Treat with The Magic Hands"!
@Lochlee
3 жыл бұрын
Thanks for watching! Glad to help out
@zh9119
3 жыл бұрын
@@Lochlee Sorry, I forgot to like and subscribe, it's done now!
@Lochlee
3 жыл бұрын
@@zh9119 Thank you!
@2moomoo11
5 жыл бұрын
A little slow and the audio crackling can get irritating but not irritating enough I didn’t watch. Excellent demonstrative video!
@RootSuitMan
4 жыл бұрын
Thank god I didn't have to do all that on my 2001 xj. Just had to remove the ldp and pull out the blower motor.
@chicoinchico
7 жыл бұрын
looks like a good place for me to start... my jeep is identical to yours. it has zero airflow right now. I'm just gonna start replacing everything I can until it works. any tips?
@user-to6jg3ts9f
4 жыл бұрын
Is it just my jeep, or is one of those blower screws stuck behind the firewall? I can't find a way to get a wrench on it to unscrew. Any suggestions would be appreciated.
@prestigeproductions2551
2 жыл бұрын
Fantastically thorough, thank you.
@Lochlee
2 жыл бұрын
Glad to help out! Thanks for watching 😀
@geoffreykail9129
5 жыл бұрын
How about the dust gasket on the fan housing?
@madmac40
3 жыл бұрын
Just the instructions I needed, great video
@Lochlee
2 жыл бұрын
Glad I could help
@thomasitsasecretlol1988
5 жыл бұрын
I don’t know why but I like this guy LOL
@levichalk4232
5 жыл бұрын
Thank you. That was helpful for our 1995 jeep
@nikitawarton9068
3 жыл бұрын
Loved the sound effects
@Lochlee
3 жыл бұрын
Thank you! And thanks for watching :)
@mandeville61
7 жыл бұрын
I was planning to take mine to a shop, now I will do it myself, Thanks
@d.e.b.b5788
3 жыл бұрын
Terrific how-to vid! THank you very much. SUbscribed.
@Lochlee
3 жыл бұрын
Glad to help out :) thanks for watching!
@Katarinarabbit
4 жыл бұрын
Just quick info on 96 and up its 1/4 bolt
@arturod.1144
7 жыл бұрын
I'm glad I watched your video first! Thank you!
@christianmotley262
2 жыл бұрын
The Groucho Marx of Jeepsters, all that's missing are the glasses and moustache.
@Lochlee
2 жыл бұрын
🤣
@SuperCheferic
5 жыл бұрын
Great, well done. Very clear. Thank You!
@Lochlee
4 жыл бұрын
Thank you for watching!
@eric211
6 жыл бұрын
Great Video! And good/entertaining presentation!
@shiyouniaishiya
4 жыл бұрын
Appreciate the video! just did mine today and this definitely helped, good job man.
@tomlibero3780
7 жыл бұрын
I suggest to check and clean up blower place, because aftet years we can find many garbages...Thx!
@paulanderson388
8 ай бұрын
Did you reuse the rubber gasket that was in the old motor?
@Lochlee
8 ай бұрын
If I remember right yes. But it's been a minute 😄
@paulanderson388
8 ай бұрын
I had to use my old one because the dealers and auto parts stores don't have them anymore. Fortunately, mine was still in decent shape and I could use it again. I love these old Cherokees. They are easy to work on.@@Lochlee
@Sockcop
6 жыл бұрын
Thanks for the help! Just changed mine out today!
@Lochlee
6 жыл бұрын
I'm glad it helped you out!
@TheDuoFinds
5 жыл бұрын
I've got a 2001 XJ. Do i need to discharge the AC before I replace the blower motor?
@Lochlee
4 жыл бұрын
Sorry it is a late response, but thankfully no that isn't necessary. I hope your repair went well!
@Rectifiable
5 жыл бұрын
Mine only runs on low. I’ve changed the switch and relay, but that didn’t fix it. Now I’m wondering if changing the motor will?
@manuelvaldespino5053
4 жыл бұрын
Very good thankyou
@Lochlee
4 жыл бұрын
Glad to help out! :)
@Glory_inthe_3rd77
Жыл бұрын
Thank you sir.
@Lochlee
Жыл бұрын
glad to help out!
@macnoobin9688
6 жыл бұрын
Great video! Thank you for putting this together.
@haven7388
6 жыл бұрын
Got a 96 xj and blower motor working but found a ton of mouse bedding up under passenger side dash clogging the air flap. Removed what I saw and still heat not coming from any vent. Any ideas?
@WAFFLE_CATREAL
5 жыл бұрын
Awesome video
@mrmixupreads
6 жыл бұрын
Nicely done
@jaytheslayer7703
2 жыл бұрын
Awesome!!
@Lochlee
2 жыл бұрын
Thanks!
@alvinsyquia2263
5 жыл бұрын
Nice video thanks alot
@xjwalter
4 жыл бұрын
sorry, your cherokee is 2.5i or 4.0?
@WilAlex83
2 жыл бұрын
Gold.
@meganfrances3082
4 жыл бұрын
thank you so much!!! this helped me a lot
@2znmartin5
4 жыл бұрын
You're my hero.
@geoffbalme3930
7 жыл бұрын
Nice Tilley and good job
@Lochlee
7 жыл бұрын
:D thanks best hat ever, saved my bacon on more than one occasion digging ditches in 115 degrees! Thanks for watching!
@frankyortiz7695
4 жыл бұрын
Exelent explecation and very funny,, thanks!
@drewreuss8908
7 жыл бұрын
Hey, Nice video! Just about to do this same install. I have a random question about that yellow sticker in the jeep near the area where you are working. I have the same one on mine and am wondering what it is from. I believe it has to do with a braking drum upgrade?
@drewreuss8908
7 жыл бұрын
Just watched through your video again... yours is for a different part that has been switched out.
@jaredjohnson8387
6 жыл бұрын
That is for the oil filter adapter. Turns the filter sideways along the motor instead of sticking right out off of it.
@ReodorF1
6 жыл бұрын
Thanks great how to video
@shawnpennington3852
6 жыл бұрын
My defrost us only working on mine. Should I do the resistor 1st or is it the blower motor itself?
@Lochlee
6 жыл бұрын
That sounds more like a vacuum line issue or a diaphragm problem than the blower motor. Sounds like its stuck in only one position.
@grant2053
6 жыл бұрын
Thanks for this man.
@theweepingprophet8413
7 жыл бұрын
Great video man :)
@Lochlee
7 жыл бұрын
Thanks! I'm glad you liked it, I hope it helps. More on the way.
@hugotorres9476
6 жыл бұрын
very clear......thanks
@AMan-hh8lh
4 жыл бұрын
Nice
@kenadams3951
5 жыл бұрын
Great are you a mine in your fulltime job....
@melynnanderson
5 жыл бұрын
thank you !!
@jimmoravec1326
Жыл бұрын
Blower motor is on the inside of my Jeep Cherokee
@Lochlee
Жыл бұрын
Interesting. What year and model?
@jimmoravec1326
Жыл бұрын
@@Lochlee 1996
@jimmoravec1326
Жыл бұрын
@@Lochlee 1996 Jeep Grand Cherokee
@anniemae9743
7 жыл бұрын
Awesome video so cute lol
@cenkmazibasi76
7 жыл бұрын
Did you forgot, gasket for new motor ? :)
@kristiancampbell1170
3 жыл бұрын
The new ones don't come with a gasket. Works just as well without one.
Пікірлер: 148