This is awesome! Thank you for taking the time to share Baron.
@bgrutterdds
Жыл бұрын
My pleasure!
@ultrarunner0476
2 жыл бұрын
Great video, thank you for taking the time to show us your ongoing creativity and innovation
@bgrutterdds
2 жыл бұрын
My pleasure!
@ddelrose
2 жыл бұрын
Always enjoy your documentation and sharing!
@forrest4311
Жыл бұрын
Could you please make a video explaining how to create a flipper if your scan of the arch is already missing the tooth? It would be a tremendous help!
@bgrutterdds
Жыл бұрын
The only difference would be that you would use the ad virtual tooth function that exists in the model editing module. Simply pick a tooth from the various tooth libraries and scale it to size and position it how you want. Then when you go to export the flipper, you just want to make sure that the only things visible in the 3D view are the flipper framework which is technically called a surgical guide in the software and the virtual tooth. Then when you go to file and export data, you'll see that those two things are checked. Export those two and print. You can use tools within the crown and bridge module to cut out the bottom of the tooth if you're worried about it impinging on tissue. Honestly, though, the pontic shape teeth in the software tend to work just fine. And even if you have to choose one of the libraries that isn't round on the bottom, it doesn't take long with a burr to simply grind it off to the shape you want. Sometimes it's not a bad thing to have a little extra there so that you can trim it to shape based on the post surgical setup.
@scottharris8936
Жыл бұрын
Awesome!!! Thanks!!! Can you make a Nesbit flipper with this process?
@bgrutterdds
Жыл бұрын
Yeah, should with well. Just remember that the flex of the claps will depend on your material. Choose accordingly.
@HoneyBunny-ji2sr
Жыл бұрын
Is it possible to add ball clasps by cutting slots into the flipper and then using a cold cure acrylic to fill in the slots holding the ball clasps?
@SzaraDentalLab
Жыл бұрын
Awesome
@jasonlarkin1037
Жыл бұрын
Brilliant my friend 👏
@bgrutterdds
Жыл бұрын
Glad you like 😎
@thatboyandy
Жыл бұрын
Awesome idea. These videos are so helpful. What material do you recommend for this?
@bgrutterdds
Жыл бұрын
I'm using SprintRay OnX
@tracypaul8926
Ай бұрын
What do you do if you trace out the points for the surgical guide but the computer keeps giving you a crazy design that doesn't follow the dots?
@bgrutterdds
Ай бұрын
That can happen for many reasons. Most notably is flaws in the mesh. Make sure there are no holes or errors in the mesh and move your line.
@gmctan
Жыл бұрын
Hi Dr. Grutter. At the 2:14 mark, I can't seem to find my circle in my software. This is my first time using it, so bear with me. After hitting the selection brush and left clicking the mouse, it doesn't do anything. Right click and rolling the middle wheel achieves the same purpose of zooming in and out. So, where is that circle highlight, if I may ask. Thanks in advance.
@bgrutterdds
Жыл бұрын
Are you holding the Shift button? That is your activation key to turn the pointer into an active tool.
@gmctan
Жыл бұрын
@@bgrutterdds No, did not. Didn't know I had to. LOL. Thank you!!!
@Digital-Dental-Designing-Tech
Жыл бұрын
Simple and accurate. Thank you for sharing your knowledge. I would like to do this in meshmixer, as I am using meshmixer more than BSP. In meshmixer I can merge both parts, and then make it solid and get a better stl file to 3d print.
@bgrutterdds
Жыл бұрын
"Better" in what way? I can merge them in BSP, as well. But it offers no difference in print quality. Literally zero difference that the software sees. Except the fact that when you make something solid, it actually recreates the entire surface possibly introducing errors. Probably not significant when it comes to a flipper, but you are in fact recreating the entire mesh which I always advise against.
@MontrealDentistry
Жыл бұрын
Can't get the Model edit screen just model manipulation wich gives me not the same options as you. running latest version
@bgrutterdds
Жыл бұрын
Need to switch from Advanced module to Model Editing module.
@fernandotcd
2 жыл бұрын
Great content
@baumang
2 жыл бұрын
Seeing as you only have Shade A1, would it be possible to bond shaded composite to the buccal to give you a better shade match?
@bgrutterdds
2 жыл бұрын
Yep. I've done that before. I've actually used putty to make a matrix and then cut back the tooth. At that point, you can just apply the composite and use the putty matrix to shape it for you. Once cured, just trim off the flash. That sad, I purchased the GC stain kit for this purpose.
@Brendenator87
Жыл бұрын
@@bgrutterdds What shade A1 resin are you using here for intra-oral use?
@bgrutterdds
Жыл бұрын
I'm not sure I understand the question. You asked what shade and then named the shade that I'm using. It's onx A1 that I use the GC optiglaze kit to stain to adjust.
@adam5201
2 жыл бұрын
Very cool. What resin did you use
@bgrutterdds
2 жыл бұрын
I used OnX.
@drchani7321
2 жыл бұрын
Amazing
@bgrutterdds
2 жыл бұрын
Thanks!
@claytondentalgroup365
Жыл бұрын
Thanks a lot. awesome. Not too long, not too short, very informative. How Flexible is OnX? Have you tried OnX Though?
@bgrutterdds
Жыл бұрын
It's about like acrylic. Not much flex. I have Tough, but haven't used it for a flipper, yet. I've used Nightguard Flex when I need that and overlay with composite for the teeth. Not a perfect solution, but it works. You could also print the teeth in tooth resin and bond to the NG Flex framework.
Пікірлер: 35