From the front to the rear, CLEAN! I can tell you have put a lot of time and money into the car and it's paid off big time. Nice job!
@waynetessier3058
3 жыл бұрын
I have heard nothing but good regarding BluePrint engines.
@paulb4241
2 жыл бұрын
I agree. Just put one in the vet :)
@waynetessier3058
2 жыл бұрын
@@paulb4241 ;Which one did you go with.
@kingleo79
Ай бұрын
Did u look because everything i read they where very good so i bought a 383 stroker couldn't be happier @waynetessier3058
@calvinwilson1051
2 жыл бұрын
Man I love the setup of your car nice man l must have watched your video a dozen times 👍
@Blando7887
2 жыл бұрын
Very nice, Im planning on putting a similar drivetrain in my 02 Silverado
@Lightning7474.
Жыл бұрын
That's a very sweet Monte Carlo bro👍 much respect.
@richardsmith-qy6vl
2 жыл бұрын
Very good looking g car well put together
@robertsmith7637
3 жыл бұрын
That's a dam good looking g body right there👍👍🇺🇸
@mikesmonte3682
3 жыл бұрын
Thanks man
@calvinwilson1051
3 жыл бұрын
Man nice car 👍👍👍
@artwallace2823
2 жыл бұрын
12 to 111..you did good 👍
@geneendicott9228
Жыл бұрын
Love it
@beardandfriends8227
3 жыл бұрын
Man I wanted to take a ride in it got a bucket to sit on lol
@charleswalter7564
3 жыл бұрын
Dam nice monte hopefully I see your car at 7580
@EffectsExe
3 жыл бұрын
Gotcha They dynod this motor on 91 octane wonder if it makes more with 93 octane
@travistucker7471
3 жыл бұрын
Nice monte carlo!
@GearheadRob319
Жыл бұрын
Nice Monte
@EffectsExe
3 жыл бұрын
Your running race gas. A gas station near me has 110 octane I didn’t know if I should get it because it might harm the motor
@mikesmonte3682
3 жыл бұрын
I only run race gas when I’m spraying. Otherwise I just run 93 on the motor... the race gas is 110 Sunoco unleaded do not use leaded gas. The race gas comes in a 5 gallon metal container they don’t have it at the pump.
@superduty4556
2 жыл бұрын
No such thing as too much octane. Can have too little, though.
@jappsautomotive4210
3 жыл бұрын
What is the backspace on the rear wheels. Did you have to notch your frame. Have a nice setup 👌
@mikesmonte3682
3 жыл бұрын
Want to say it was 4.5 backspacing. No frame notch .. thanks
@ssgang777
3 жыл бұрын
@@mikesmonte3682 wow no frame notch? I love your SS can you do a vid on your wheels only showing and explaining I'm new at this trying to learn
@paulpowell195
3 жыл бұрын
I have an 86ss frame notch and still cant run a 5.5 bk spaceing 15 ×8 wheel
@paulpowell195
3 жыл бұрын
So ure running a 4and half bk space 15×10
@mikesmonte3682
3 жыл бұрын
@@paulpowell195 I’m almost positive that has 4 1/2 backspacing. But yea it’s a 15 x 10. Fits perfect no spacers no notching nothing
@gbody_gang5023
2 жыл бұрын
Good looking monte . Running a jegs 383 crate engine soon. #subscribed
@EffectsExe
3 жыл бұрын
I have this motor it’s not built for boost tho they said how does that nitrous work out?
@mikesmonte3682
3 жыл бұрын
Yeah I talk to blueprint engines before I did anything they do not recommend boost or nitrous. So obviously I just waited until the three-year warranty was up. But at the moment I’m running a 100 wet shot but I backed the timing off 6° and run race fuel and it’s been fine
@burnouttv9709
3 жыл бұрын
😍😍😍
@EffectsExe
3 жыл бұрын
Oh ok so don’t use the Sunoco 110 gas? What about cam 2 gas that comes in the barrel
@mikesmonte3682
3 жыл бұрын
You Can run race fuel when spraying... If you’re just on motor there’s no point as 93 octane is plenty sufficient for 10 to 1 383
@jerryparr7156
11 ай бұрын
I love the car man very well done. i would like to replicate the tire/wheel setup on my 84 grand prix. would you mind telling me the tire/wheel size for the front? i absolutely love the ssr stars but they turned me off in every pic of the front. they look waaaaay better with a lip though
@arodderz
10 ай бұрын
Just going off my ride, which has a similar look, the rears appear to be 275/60/15 ( also 28x10.8R15 slick tire for track which is the same size) and the front skinnies look like Mickey Thompson ET front runners 28x4.5R15's or 28x7.5R15's. Hope that helps.Good luck. And the Weld racing pro stars have a deeper lip. Just fyi.👍
@thabiznizz
3 жыл бұрын
Nice build. I love gbody cars. One question though. Why didn’t you go with electric fans?
@mikesmonte3682
3 жыл бұрын
I don’t have to worry about a malfunctioning electric fan or temp sensor to turn the fan on. I like to keep it simple and no worries, And I didn’t feel like flipping a switch LOL
@thabiznizz
3 жыл бұрын
@@mikesmonte3682 I definitely understand that lol. I installed one on my s10. It’s not too bad. I used a 3 way switch just in case the temp sensor fails.
@EffectsExe
2 жыл бұрын
What does this motor make on dyno to the wheels without the spray ?
@mikesmonte3682
2 жыл бұрын
It’s only been on an engine Dyno not a chassis Dyno. It should make about 380-385 at the tire on motor
@ronaldroberts4178
6 ай бұрын
Car looks great!!!!!What is the part number on the header?
@anthonya9568
3 жыл бұрын
Beautiful,,,I've got the exact same car,,I'm dropping in a 500 horse plus small block this summer,,,what gear r u running,?
@gmmcss3817
3 жыл бұрын
Just finished doing that it mine. Runs amazing🤙🏽
@f250ford1975
3 жыл бұрын
@@gmmcss3817 I'm about to do that in mine as well in a few weeks🤣
@gmmcss3817
3 жыл бұрын
@@f250ford1975 nice lmao
@jahkimamarcellus9086
5 ай бұрын
What size tire on the front ?
@EffectsExe
3 жыл бұрын
I have a turbo 350 bolted to this motor I feel like it doesn’t launch with the automatic how do you feel?
@mikesmonte3682
3 жыл бұрын
I have a built Turbo 400 behind mine.... used to have the 200-4r... He definitely launches slower with the turbo 350 or turbo 400 trans.But I have yet to launch it on the spray with the new trans and converter. Are used to do a 1.52 60 foot with the overdrive trans.... Now, on motor only it does 1.70 60ft. What about yours
@JDRTRM
Жыл бұрын
Maybe I missed it , what gears in back ? Thinking of doing the same engine with spray to my caddy and want to gear with 5.13’s to quickly get it by moving , don’t care about going faster then 120.. light to light car
@mikesmonte3682
Жыл бұрын
4.10’s w. 28 inch tire. Turbo400 tops out at 125 at 6k rpm approx
@2strokejames858
3 жыл бұрын
Do you happen to know the lip size/offset of the rear wheels?
@zelly1327
2 жыл бұрын
What’s the actual tires size for your front tires on the 15x4’s
@joshuakindred9441
3 жыл бұрын
can you tell me the model number of them headers I need a pair for my 86
@mikesmonte3682
3 жыл бұрын
They are just the cheapest set of hooker header long tubes for the g-body from summit. I don’t remember the part number bought them new about 11 years ago
@PedenPerformance
4 ай бұрын
15x10 rears? Any frame notch?
@richardsmith-qy6vl
2 жыл бұрын
Is that the factory rearend or #id you upgrade to a 9 inch.
@bigboikc07
3 жыл бұрын
Mine has as 383 built by me it’s 3850 with me in I have a regal full interior air conditioning and all power seats
@mikesmonte3682
3 жыл бұрын
Awesome 👍🏻
@bigboikc07
3 жыл бұрын
@@mikesmonte3682 won’t say a number cuz of the people I have to run but it runs a good good number
@calvinwilson1051
3 жыл бұрын
Did you notch the rear frame for the tire
@mikesmonte3682
3 жыл бұрын
I did not
@Rock_Whisky
Жыл бұрын
At first glance I thought it was a foxbody from the thumbnail.
@296jayce
3 жыл бұрын
Thays a nice steering wheel. What steering wheel is that?
@richardsmith-qy6vl
2 жыл бұрын
Love your car I have a 88 SS I hope mine ends up as nice I have a brand new big block 427 but I think I'm going to put a blueprint 400 power adder engine in it. Your car looks great.
@demarques1911
Ай бұрын
Did you really give up a Big block 427 for a small block 400?
@richardsmith-qy6vl
Ай бұрын
@@demarques1911 did you notch your frame ? And what is the back space on your back rims? Thanks
@richardsmith-qy6vl
Ай бұрын
No I still have the 427 in my car it only has about 20 miles on it . I do have a 406 and a 421 I. Going to get together and put one of them in it looking for a tri 5 for the big block I want to build a gasser
@cityconference5130
2 жыл бұрын
So stock it runs 12.0 in the 1/4 mile?
@mikesmonte3682
2 жыл бұрын
Yes in the heat and bad air. Should do 11.8 on motor w good da
@richardsmith-qy6vl
3 жыл бұрын
Nnice car did you have to notch the frame in the rear to fit those tires?
@mikesmonte3682
3 жыл бұрын
Thanks... nope no frame notch. Rears are 15x10
@richardsmith-qy6vl
3 жыл бұрын
Thank you Mike is that a 4 inch offset rear rim or 41/2 in offset
@wisegarage5761
3 жыл бұрын
what trans/converter
@mikesmonte3682
3 жыл бұрын
Th400 from FTI and a Circle D custom nitrous conv 3k stall
@nasty3145
2 жыл бұрын
Damn. Running a 100 shot on their hyper-crack pistons. You got balls my friend, keep us posted on how many pulls on 100 it takes before it lets go. Im very curious myself if itll hold up longterm.
@corpuslanius
3 жыл бұрын
How has the blueprint been holding up?
@mikesmonte3682
3 жыл бұрын
Perfect!!!! No issues at all!
@dougtepper3770
Жыл бұрын
@@mikesmonte3682 Does it have enough vacuum for the power brakes?
@armondogarcia7532
2 жыл бұрын
Damn that was like the twilight zone creepy I say keep kids far away not lol
@TheSqually84
3 жыл бұрын
What kind of transmission. What stall?
@mikesmonte3682
3 жыл бұрын
Turbo 400FTI rated at 800 with a circle D custom nitrous conv at 3000 stall
@starfirerider
2 жыл бұрын
Is the a vacuum secondary?
@mikesmonte3682
2 жыл бұрын
Yes
@starfirerider
2 жыл бұрын
Have you tried a mechanical secondary, I was told vacuum secondary was for a heavy car but my buddy said it didn't matter, just wondering
@misfit32_one61
2 жыл бұрын
What model is your motor?
@danielyoung4378
3 жыл бұрын
How much it cost.... I got 68 Chevelle
@mikesmonte3682
3 жыл бұрын
Engine was $4980 about 3 1/2 years ago.
@123nova87
3 жыл бұрын
What’s it run with the 100 shot ?
@mikesmonte3682
3 жыл бұрын
Had some trans issues.... big trans issues lol.... but my only 100 shot pass was a 11.3 at 117
@travistucker7471
3 жыл бұрын
Whats the weight of the car?
@mikesmonte3682
3 жыл бұрын
3050 without the nitrous bottle
@kingknowledgeelallrightsre449
Жыл бұрын
You running the 1/4
@rackcity7879
2 жыл бұрын
86 ss 800 hp 427 juice roll cage tubbed drag car 4 sale
Пікірлер: 103