If you are interested in a KZitem live Q&A session to discuss the code and electronics in more detail, leave a comment here to let me know.
@modustrial
6 жыл бұрын
Cool, hopefully a few more people chime in, and then we'll be a go. I think the process of how to generate visualizations would be fun to discuss. I generally create new visuals by gradually tweaking and modifying others' code, until it is something entirely different.
@modustrial
6 жыл бұрын
That would be very cool. I saw a pattern somewhere like that, but it was for a Teensy controlled matrix. I have a couple of Teensy 3.2 boards and Octo2811 shields, just need to find the time to figure out how to wire them up....
@n00blord111
6 жыл бұрын
That's why I'm here
@MichaelScottPerkins
6 жыл бұрын
I am 100% on board for a live session. I'd love to see more about these electronics heavy builds.
@danny3man
6 жыл бұрын
As would actually like a tutorial on programming that arduino and the led matrix.
@BruceAUlrich
6 жыл бұрын
Man! It is so detailed! I think the part where you can change where the diffuser is located is brilliant!
@modustrial
6 жыл бұрын
+Bruce A. Ulrich thanks! the diffuser was a mid-build modification....I was originally going to use frosted spray on clear acrylic, but found this white acrylic on eBay midway thru building and decided to try it. I was going back and forth on what look to go with as far as diffusion, and finally decided I had to figure out a way to get best of both worlds :)
@BruceAUlrich
6 жыл бұрын
Well, that was definitely a good choice. It really added a lot.
@modustrial
6 жыл бұрын
Glad I wasn't the only one who thought so :)
@tuanma5405
6 жыл бұрын
Hi, when you press mode button, actually it will connect pin5(green wire) on arduino to GND or 5V? Thanks.
@KaleoMgmt
5 жыл бұрын
Mike, I've been binge watching your videos over the past few days, and I think one of the things I enjoy the most (besides the creative designs) is how honest you are with your mistakes and timelines. It just reminds me that it's not uncommon to have to fix (and learn from) a mistake, modify a design midway due to plans vs. reality, and not all projects can be completed in 60 minutes! Love the channel. Thanks for sharing your skill and passion with the rest of us!
@modustrial
5 жыл бұрын
Thanks for the kind words Chris! I make lots of mistakes and will certainly continue to share!
@ryannutter4669
6 жыл бұрын
Awesome build! I'm a former DIY audio hobbyist. The only real positive critique I can think of as far as the sealed enclosure for the drivers goes is lining the inner walls with some type of sound damping material. I'm a fan of carpet padding as it's thin, but it's a dense enough foam to catch any unwanted back waves from bouncing around. I'd definitely stuff the enclosures with some poly-fill as well.
@FreemanFurnishings
6 жыл бұрын
great video. you explaining all the way through really kept me engaged all the way through.
@modustrial
6 жыл бұрын
Glad you enjoyed it!
@DheerajKumar-dk747
5 жыл бұрын
You may open own music player system store! Great work and implementation!
@modustrial
5 жыл бұрын
Thank you!
@cessposter
4 жыл бұрын
Unfortunately, it costs money.
@cessposter
4 жыл бұрын
*Therefore, we must start a fundraiser*
@retired-Lt.Col-67A
6 жыл бұрын
It is great to see electronics become a fun project that even the young-ones can be shown basics of woodworking & electronics to make a satisfying units their friends like also. It was once called teaching which sadly 'off the shelf' units are bought without knowledge of this & other easily built little projects are made from. I use Raspberry Pi units to encourage others to use electronics personally. Appreciate your efforts we are on the same wave length.
@modustrial
6 жыл бұрын
Thanks! Great to hear of others sharing the love of making with the younger generation. Growing up I had all these ideas, but the technology wasn't there to bring them to life, and now it is. It is unbelievable the opportunities to make and design that kids today have -- I can't wait to see what they create by the time they are my age!
@aam50
6 жыл бұрын
Great design - and I particularly like the idea of moving the LED matrix to adjust focus - inspired. Thanks for sharing the ideas.
@modustrial
6 жыл бұрын
Thank you. Happy to share! Hopefully it inspires to make even cooler designs!
@WorksbySolo
6 жыл бұрын
Wow Mike, this is quite a complex project. There’s a lot of stuff going on in there! Nice work. Gives me some good ideas for my own projects. Thanks!
@modustrial
6 жыл бұрын
Thanks! Yea, this one was really involved....but once the idea was in my head, I had to see it through :) Right now I'm thinking about a simple project for my next one.... I'm curious to see what you come up with.
@DragonGateDesign
5 жыл бұрын
When all ya friends out having babies and ya stuck playing with your self in a wood shop lol... Just playing love the video turned out awesome 👌
@modustrial
5 жыл бұрын
Lol, thanks much Shaun!
@thadiusp
6 жыл бұрын
This looks incredible! Such a great job! Thank you for sharing this with us!
@modustrial
6 жыл бұрын
Thanks! Happy to share and glad you enjoyed it.
@JessVideoDude
6 жыл бұрын
You did an amazing job! That screen really makes it stunning and the adjustment of the screen is perfect. Thanks for sharing!
@modustrial
6 жыл бұрын
+JessVideoDude thanks! Yea, that white acrylic was a lucky find
@AyushSingh-wb3cj
6 жыл бұрын
Would love to see the Q&A session!
@hardcorecap
6 жыл бұрын
Audio comments: polyfill for the speakers is helpful sound-wise. If your speakers are sealed, make sure they're air tight and that the speaker cabinet is of proper size. Other than that I thought the ability to move the LED board forward and back was mega clever. Awesome job!
@modustrial
6 жыл бұрын
Thanks! On Soundblab's recommendation, I actually just bought some polyfill to include in the three more that haven't been completed yet. I'm going to go back with hot glue and make sure any air gaps are sealed completely in the enclosures.
@Heartwing37
5 жыл бұрын
This is SWEET! What a nice gift!!!
@modustrial
5 жыл бұрын
Thanks Laurie!
@njfulwider5
6 жыл бұрын
Very Detailed Instructions! Great Build!
@modustrial
6 жыл бұрын
Thanks much!
@ledmk2
6 жыл бұрын
Very cool lights
@modustrial
6 жыл бұрын
Thanks!
@dominikwirth9852
6 жыл бұрын
Nice work! I think I'm going to build one with a rechargeable battery pack when i have some time. I also love the adjustable position of the led matrix! You cold add a spring between two countered nuts on the threaded rod and the rear plate of the speaker so that you don't have to push the rod back in the speaker when you loosen the tumb nut. :)
@modustrial
6 жыл бұрын
Thanks! The spring is a great idea, I was trying to come up with a solution for that!
@aleksandrab.6670
6 жыл бұрын
This is stunning and very inspiring, wow!
@modustrial
6 жыл бұрын
+Aleksandra B. Thanks! Glad you like it.
@davy9247
6 жыл бұрын
If only it was as easy as you make it look. :) Would really love to build some of the things you've shown, but it comes down to either not having the right tools or lack of knowledge in electronics. But watching your videos, I'll definitely give it a try soon. Trial and error.
@modustrial
6 жыл бұрын
+Jason Smith just break it down into small tasks. If electronics are the big hurdle, try following cine-lights tutorial for a VU meter or doing natural nerds build for a music reactive desk lamp. Once you do those, the electronics and programming for this are basically the same. Then it's a matter of doing the woodworking, then figuring out the speaker wiring (this part is very simple with the kit). Then after you tackle each of those individually, you just figure out how to put them all together.
@maurolimaok
4 жыл бұрын
It´s a very beautiful video! Congrats!
@jplace6757
6 жыл бұрын
GOOD STUFF!! This video was put together perfectly, and you documented everything for us nicely!! ++1
@modustrial
6 жыл бұрын
Thank you! Glad you enjoyed it!
@freivonstil
6 жыл бұрын
A really beautiful video, you put out again! Your ideas with electronics are inspiring :) (Suggestion for the enclosures: You seamingly have quite a lot of unused space in the box. Try to make the enclosures bigger, that will result in a more rich sound with more bass. For really clar audio it`s useful to separate the speakers, bot honestly: it doesent make a big difference (with bluetooth amps and inexpensive drivers at least. So in the end you could even leave out the enclosures if the box is properly sealed. Bonus: It also get louder) Greatings
@modustrial
6 жыл бұрын
Thanks for the tips on the acoustic design! I am already planning another speaker build for 2018, and hope to improve the acoustics in the next one.
@dhruvgulati1667
6 жыл бұрын
Man an awesome built appreciate the hard work
@modustrial
6 жыл бұрын
Thanks! Glad you like it
@reginald56000
6 жыл бұрын
Its Easier to make if i had all your Equipment ..Sir you have complete tools and equipment!! i envy you sir
@modustrial
6 жыл бұрын
Thanks! Although there is always another tool to have. You could make this with a basic tool kit (drill, circular saw, router, and jig saw), if you took your time with it. The tools are nice to help it along though :)
@1AXMRDR
5 жыл бұрын
Very nicely done. Great job and great video. Go have a cold one and reflect on today's success. I subbed because of this vid.
@modustrial
5 жыл бұрын
Thanks for the kind words! 🍻🍻🍺
@MrCcarter7
6 жыл бұрын
Awesome job! Very cool and intricate! Thank you for sharing this project. Many blessings in Jesus' name!
@modustrial
6 жыл бұрын
Thank you! I'm glad you enjoyed it.
@pacowang283
6 жыл бұрын
Excellent build sir. But, 5 friends and 5 babies in a week. Something is in the air. Be careful you don't catch it.
@modustrial
6 жыл бұрын
I know, that would take up all my DIY time :)
@cessposter
4 жыл бұрын
???
@teabagNBG
6 жыл бұрын
i just made my first project.. i love your project. i really like the mod for the led to difuse them great idea!!
@modustrial
6 жыл бұрын
+Dave Blvnko thanks! What did you make?
@teabagNBG
6 жыл бұрын
Modustrial Maker i started with some simple mapped Christmas lights for the tree.. worked out but I need to get better at soldering.. next I want to do is a udoox86+ambilight ... I also think about making ur Projekt for my workshop.. but I would try to add a radio with inside 😊
@modustrial
6 жыл бұрын
Cool! If you share pics on Instagram, definitely tag me (@modustrialmaker). I want to do an ambilight for a TV at some point, but am hoping if I wait on this, someone will send me some code to make it easier to tackle :) Re: soldering -- if you are using a cheap soldering iron, you might be better than you think. I upgraded to a decent soldering iron with more power, and it makes a world of difference.
@jonathanstef3218
6 жыл бұрын
Sound Design buff... Maybe not, but I do have some tips. Pocket screws are great where you used them, but the sealed enclosures really do need to be sealed (airtight or really close). It looks like the enclosures are just held with screws, which is not sufficient to achieve this. What I recommend is to glue all the sides of each enclosure save for 1 (to service in the future). After its glued, caulk all the seams on the inside to seal them further, and also to soften the sharp edges (can create high frequencies if you're really picky). Then attach the speaker and the last side using closed foam tape or rubber as a gasket (parts express has rolls of foam gasket tape for cheap). Lastly, hot glue the speaker wires in the hole made to route the wires to finish sealing the enclosure (leave some slack inside the enclosure so you can open the last side and not have to unglue the wires). This will probably make the biggest improvement in sound quality. Loved the project, keep it up!
@modustrial
6 жыл бұрын
Thanks for the tips! I will definitely add some glue to seal off the holes for the speaker wires -- I notice there is an amazing amount of air coming through them. I actually did use caulk on one of the speaker I built, but that part of the video got cut for sake of brevity, and I believe you are right that the version in the video has one joint held with pocket screws only (I made two of five speakers so far). As for the gasket, the speakers I used had built in gaskets, so I think that should be sufficient? (I also caulked around the edges of the speakers just to reinforce them against vibrations, in case the screws loosen over time.) .
@jonathanstef3218
6 жыл бұрын
Modustrial Maker the built in gaskets for the speaker drivers are sufficient, don't need anything extra. If the screws strip out or loosen, I doubt that silicon caulk will keep the driver in place (it doesn't hurt, but I don't think it does much).
@modustrial
6 жыл бұрын
Its not just any silicone caulk -- I used Fuze-It. The stuff is crazy -- highly recommend it if you haven't checked it out.
@zz-xz2lt
3 жыл бұрын
Bluetooth speakers with lights I recommend dindinmodern audio. And I've been using it for a year now and it still works great. The price is also very good.**114
@Sion4yhwh
6 жыл бұрын
im very interested in that live q&a session
@modustrial
6 жыл бұрын
+Daryll Inso cool, hoping to make it happen. As long as I can get a solid group of 5-10 ppl interested we'll do it
@modustrial
6 жыл бұрын
Daryll -- if you could do me a favor and either (a) reply to the pinned comment re: the Q&A session and let me know how to notify you or (b) send me a message on Instagram (@modustrialmaker) so I can let you know when the Q&A will be, it would be much appreciated.
@radiocaf
6 жыл бұрын
Holy crap this is awesome. What a great project! Wish I had all the tools needed to make my own.
@modustrial
6 жыл бұрын
Thanks much! You absolutely don't need all the tools I used... You can build a speaker with a circular saw and drill...what tools are you working with?
@radiocaf
6 жыл бұрын
Right now (I'm still fairly new) I have a Jigsaw, a reciprocating saw, and a drill. I also have a dremel on it's way to me.
@modustrial
6 жыл бұрын
You can build a speaker with those tools and an MDF shell, just be ready to do a lot of hand sanding. A circular saw will really help as far as cutting pieces straight. I would recommend that and a randome orbit sander as your next tools. Check Craiglist as you can often find lots of old corded tools available on the cheap
@radiocaf
6 жыл бұрын
Thank you so much, I will definitely get hold of a random orbit sander next, and look to getting a circular saw soon! :-)
@modustrial
6 жыл бұрын
Awesome! And have fun, it's a very addicting hobby :)
@JonathanRansom
6 жыл бұрын
Nice build!
@modustrial
6 жыл бұрын
Thanks!
@NPGmember
6 жыл бұрын
Verry good Well done!
@modustrial
6 жыл бұрын
+NPGmember thank you!
@michelevitarelli
6 жыл бұрын
Great project and video. Thanks for sharing. Subscribed.
@modustrial
6 жыл бұрын
Thanks! Glad you enjoyed, and looking forward to hearing your feedback on the safety issue pointed out in your previous comment.
@jchau9898
6 жыл бұрын
very cool build. i would be very interested in a q&a session. i'm going to try to build it but i have no experience with wood working so i'm trying to find an alternate enclosure.
@modustrial
6 жыл бұрын
I still owe everyone the Q&A. I had ambitions for a dual camera setup so I could show code and the speaker at the same time, but have not been able to get the equipment and software set up due to time/money constraints. I will probably just do an Instagram live session instead in the next week or so.
@Mario-yh3qq
6 жыл бұрын
Thanks for the Video and work, Greet from Germany
@modustrial
6 жыл бұрын
Thank you! I will be putting up a Google Translate version with subtitle in German at some point over the next week, if you are interested.
@Mario-yh3qq
6 жыл бұрын
Das wäre super, wenn es möglich ist - That would be great if it is possible
@modustrial
6 жыл бұрын
+Mario definitely...we have a holiday weekend coming up here in the US, so I will be making subtitles then.
@SvetiMFNikola
6 жыл бұрын
Great work, thanks for inspiration.
@modustrial
6 жыл бұрын
Thanks! Glad you liked the build.
@petersage5157
6 жыл бұрын
Nice, detailed video on a decent, cabinet-grade speaker. (I'm tired of seeing speakers whacked into XPS foam boxes - might as well use an oatmeal can.) I'm sure your friend's baby will be well-enriched by it! Did you really need an Arduino Mega for this, or did you use it because you happened to have one on hand? I'd think anything bigger than a Nano would be overkill for this project.
@modustrial
6 жыл бұрын
Thanks! The mega was used because the code was too big for a nano...I used a clone that was like $8 so I didn't mind the fact I didn't really need the I/O on the mega
@benbuttars5594
5 жыл бұрын
In a smaller setting, what’s the benefit of using a step down converter vs just a resistor? I’m tinkering with a small vw bus model that i would like to put a few LEDs in, as well as a bluetooth speaker setup that I have robbed from an older speaker box. Can you explain it to me like a second grader? HahHa
@modustrial
5 жыл бұрын
Honestly, I'm not sure about a resistor vs step down.... I guess what I could tell you is the step down is easy to wire and you just dial in the output voltage, so it makes it foolproof.
@dmsimonson64
5 жыл бұрын
This is so cool! I love all of your projects and your videos! Any tips on how to use these patterns with a spectrum analyzer shield instead of a mic?
@modustrial
4 жыл бұрын
What Arjun said....you'll need to write different code as well for the MSGEQ7
@mrmechanical3423
4 жыл бұрын
Hi, great video. Could the Arduino code be modified for a different size matrix?
@svj3ist
6 жыл бұрын
У мужика есть инструмент для ВСЕГО!!! (This men have tools for EVRITHING!!!)
@modustrial
6 жыл бұрын
Thanks! Not everything.... yet :)
@b9robot01
6 жыл бұрын
Hello Modustrial Maker this is a great project and I have already begun ordering some of the electronics, tomorrow I am going to my local home center to get the wood and other items needed. I was wondering, in your instructions on the Arduino Project Hub you state "(optional) ¾” hole for fan intake. Drill where convenient. I centered this hole about 2” from the top edge." but nowhere did I see any listings for any cooling fan, do you have any suggestions for which cooling fan would be best. Thanks for a great project and build instructions my son is going to love this. Hell I might even make one for on my work bench as well.
@modustrial
6 жыл бұрын
I just searched for a small 5v fan on eBay...just make sure it's size is right (about 1" square or so)
@NirvanaWoodWorksbyJanie
6 жыл бұрын
This is awesome! Ive been wanting to make something similar for my 1yr old as he loves music. He uses a sound making detachable toy that came with his walker, has a couple of noises & 2 jingles, as his personal boombox. Is there a way to make this portable? How can you go about addding play/pause - forward/rewind?
@modustrial
6 жыл бұрын
Thanks! You could make it portable by adding LiON batteries as the power source. Not too difficult, although, you'll probably want to go with a smaller LED matrix since the 256 LED matrix would drain your batteries in no time. The Dayton Audio board doesn't have an easy way to add play/pause buttons.... I think most people (including me) just do that on their phone. I could see how having these would be good for a toddler to push though. I believe there are other Bluetooth audio boards that do have buttons, but I don't have experience with them. Maybe others can chime in here with suggestions?
@NirvanaWoodWorksbyJanie
6 жыл бұрын
Thanks for the LiON batteries & LED Matrix tips Mike. Didnt even think about that until you mentioned it. I suppose I could do without the play/pause - rewind/forward buttons but Id like for him to think he has some “control” haha. Thanks again and hopefully ppl out there can chime in with ideas. Im even thinking now of inlcuding a microusb card so I can control what songs he can listen to
@modustrial
6 жыл бұрын
No problem. If you make something like this, I'd love to see it. Just tag me on Instagram when you share pictures (@modustrialmaker).
@xXxDJDANxXx1
6 жыл бұрын
Not sure whether this is still an active conversation but when you was wanting to add backwards and forwards buttons you could use the TDA7492P Bluetooth Amp board that I have used for my build. It is has a excellent power efficiency ie 12v 2.6ah battery last a while. It has tactile push switches on which I have soldered on to 5 square momenteraly switch so I could leave the amp on the inside and the have the play forward backwards vol plus and vol minus on the out side. I hope this information helps you build this for your little one. He will love it if he is into building a taking stuff to bits like used to and still love doing
@modustrial
6 жыл бұрын
Thanks for chiming in Daniel. Definitely helpful. I have seen some of these bluetooth amp boards with built-in push buttons. The issue for me was always mounting this so the push buttons would be useable, without having an ugly PCB outside my speaker. Good idea to solder some more attractive buttons (presumably with some extension wire) to such a board.
@volkovaleksey3008
5 жыл бұрын
Отличные вещи делаешь👍 смотрю и тоже хочу что то из ваших работ повторить но со своими "фишками" привет от "рукоделов" из России 🙌🛠️👍
@modustrial
5 жыл бұрын
Спасибо! Я хотел бы видеть, что вы делаете! Если вы делитесь фотографиями на Instagram, просим вас пометить меня (@modustrialmaker), чтобы я их видел. (Прошу прощения за любые ошибки перевода - я использую Google Translate, чтобы поговорить с друзьями из других стран.)
@volkovaleksey3008
5 жыл бұрын
@@modustrial выделил несколько из своих работ ссылка на Instagram @baby.art.wood
@modustrial
5 жыл бұрын
just followed you!
@Tomulisss
4 жыл бұрын
Modustrial Maker About ask 330 ohm resistor about watt ?
@cannarris
6 жыл бұрын
Well done !! I love it! BTW what kind of dust mask is that?
@modustrial
6 жыл бұрын
Thanks much! It is an RZ dust mask: amzn.to/2wM8F1t
@donovank380
5 жыл бұрын
I am using a 16x32 rgb matrix instead of the neopixel. I was wondering if their was any way to edit the code to be compatible with that type of matrix instead. Thank you.
@modustrial
5 жыл бұрын
what type of LEDs? ws2812 or sk6812?
@donovank380
5 жыл бұрын
@@modustrial I couldn't find what type of LEDs I am using. But I bought the matrix off of www.adafruit.com/product/420
@modustrial
5 жыл бұрын
Unfortunately I don't think my code will work. The description of those states they are designed to be driven by FPGA.
@randomweirdyoutubechannel8955
5 жыл бұрын
Nice speaker but I would get rid of the led matrix and put a small sub there instead
@modustrial
5 жыл бұрын
That would make for a nice speaker 👍👍
@danielelbaztm3706
6 жыл бұрын
Wow nice
@modustrial
6 жыл бұрын
Thanks!
@nonameforyou2238
5 жыл бұрын
I want to make this, but on a smaller scale. (At least use some of the ideas in this video) Any suggestions?
@modustrial
5 жыл бұрын
I have an Instructable with a lot more details and a writeup on the build. I would suggest starting there: www.instructables.com/id/Bluetooth-Speaker-W-Music-Reactive-LED-Matrix/
@cyclic2696
4 жыл бұрын
With the speaker enclosures I think a pro built cabinet would have a hole (often in the front) to allow the moving air out (if that's what it's for!) but you might have put one in the back I guess... No doubt they are scientifically calculated for volume of the box and the output of the speaker. Also when you glued the aluminium (note the spelling ;) sheet to the panel face and then the led array, you would get better glue contact clamping a ply sheet over the whole area rather than just at 4 points. It evens up the contact better rather than just under the clamps. You'll have built the next one by now but just observations from here. Great project! I am a bit obsessed with led displays and this is a goody!
@GreatSmithanon
6 жыл бұрын
This is really cool. I like the idea of it and have been considering something similar myself.
@modustrial
6 жыл бұрын
+GreatSmithanon thanks! Would love to see it if you make one. If you do, please tag me in Instagram so I can check it out. My handle is @modustrialmaker
@Jimmy-lb4lp
6 жыл бұрын
Oh man ! YEAH !
@jeffdon6116
6 жыл бұрын
I love it.
@modustrial
6 жыл бұрын
Thank you!
@sergeyzhilin9529
6 жыл бұрын
Succesfully runed the code with 12*12 led table and nodemcu! )
@modustrial
6 жыл бұрын
+Sergey Zhilin awesome! Did you have to disable the interrupts? I was planning to try it on a wemos d1 mini soon, so glad to know you got it working with esp8266.
@sergeyzhilin9529
6 жыл бұрын
Modustrial Maker it works without changes) i just did not set up mic sensitivity, will do it today.
@modustrial
6 жыл бұрын
+Sergey Zhilin nice! I'm going to give the wemos a shot this weekend then. If you share pics or video of your work on Instagram, tag me so I see them (@modustrialmaker)
@michelevitarelli
6 жыл бұрын
3:15. You shoulda used a table sled. That cut if dangerous...
@modustrial
6 жыл бұрын
Yea, I mentioned in voiceover that I would use a table saw sled for the miter cuts if doing it again. (Need to get around to making one :) ) But, mainly because the miter saw didn't cut the miter properly due to the hardness of the maple. Can you explain a bit more why this is more dangerous than a typical cut (given that wood is clamped)? I'm always trying to improve safety so I'd like to understand what was done wrong here.
@tuanma5405
6 жыл бұрын
Hi, when you press mode button, actually it will connect pin5(green wire) on arduino to GND or 5V? Thanks.
@modustrial
6 жыл бұрын
+Tuan Ma I'm not sure what the question is? In the code, there is a switch_pin variable (or something with "switch" in it...I'm not at my computer now). Whatever number that is is what you connect the button to (with the red and blue wires to that pin). The green wire on the button itself should be getting the 5v power in from the power source or the 5v pin on the Arduino.
@tuanma5405
6 жыл бұрын
Modustrial Maker Thanks for your reply. I mean the green wire that connect from arduino pin 5 to 5 pins mode switch (blue and red pin). When you press mode switch what actually the switch do? Will it connect red or blue pin on switch to ground or 5 volt? Since i do not use exactly same as that switch. Now if i turn it on, the led panel just continuing jumping from one mode to other mode just in a second. Thank you.
@clauddora7810
6 жыл бұрын
But what was the led set hooked up to. And did u program it or were the settings default
@modustrial
6 жыл бұрын
All that is shown aand explained in the video. Did you watch it all theway thru?
@chrissgamer48
4 жыл бұрын
Can't you make this with an Arduino Uno? Or nano?
@modustrial
4 жыл бұрын
Code doesn't fit on the smaller memory
@StaticVapour590
6 жыл бұрын
What are those gray and orange things where you can insert wires?
@modustrial
6 жыл бұрын
Those are lever-nut wire connectors: amzn.to/2BhMtvM I love them...easy to use for quick prototyping (and carry signals much for reliably than a bread board), but sturdy enough for permanent installs. They are designed for use in 120V home electrical boxes, but work really well for applications like this too.
@StaticVapour590
6 жыл бұрын
oh, thank you so much. Those can be really handy in my projects
@modustrial
6 жыл бұрын
Glad to help!
@hydrawolfx
5 жыл бұрын
that's pretty cool. Just could you please insert in the descrption the Arduino Code & the links of the components?
@modustrial
5 жыл бұрын
It should be there (GitHub link)
@hydrawolfx
5 жыл бұрын
@@modustrial Sorry but I can only see the link of Soundlab channel. It may be cause I'm in Italy or what else I don't know, just I can't see it.
@Tomulisss
6 жыл бұрын
Modustrial Maker Hi, a great video story I learned about this project really motivates me to make the most of it. but there is some way to make it easier to get speakers led matrix where it's uncomfortable and you do not really understand too much electronics what kind of video?
@modustrial
6 жыл бұрын
Tomas Bataitis thanks! I'm not sure understand your question. Can you elaborate?
@Tomulisss
6 жыл бұрын
Modustrial Maker, I wanted to ask you to create a separate video about the led matrix
@modustrial
6 жыл бұрын
Ah ok -- did you check out my video for the Living Art table lamp? It is essentially just an LED matrix in a pretty package. It might be what you are looking for.
@cobaltdragon_5678
6 жыл бұрын
Is it not a bit overkill to use an arduino mega ? Why not use an arduino uno ?
@modustrial
6 жыл бұрын
It was just because of the size of the code -- the uno and nano don't have enough memory. Using a WeMos D1 might be another good option.
@blazemathews
6 жыл бұрын
I built a Bluetooth Speaker with a 2 3w 4ohm speaker powered by a PAM8403 amplifier supported by 5v 1A powerbank charger module and for the bluetooth i have used a USB powered bluetooth adapter Now while connecting 5v output from the powerbank module is connected to the +ve and -ve of the amplifier module and the same wire I removed the sheath connected a B0505s-1w dc -dc 5v-5v isolating converter to the respective +ve and-ve wires and the output from the converter to the Bluetooth Module Problem1: Ground Loop Sound Interference still exist Problem2: Slight heart beat like thumps from the speaker Can you help me find a solution to this? Thanks in advance
@modustrial
6 жыл бұрын
Sorry, it has been so long since I looked at this, and solving electronics issues without being able to physically play with the circuit is very difficult. Definitely check out some of the speaker building forums online -- they are a great resource for troubleshooting help.
@samsideenadigun8387
6 жыл бұрын
how do you call the wires used for the female power jack and the on the microphone board because they are not jumper wire (flat cable) and i dont know what you call them. thanks
@modustrial
6 жыл бұрын
I think I just used 20g wire for the rest of the wiring.
@samsideenadigun8387
6 жыл бұрын
i'm making one right now, i shud finish it in like a week because i av little experience and tools. i'll send the picture to ur mail when its done. thanks once again
@modustrial
6 жыл бұрын
Awesome , can't wait to see it!
@samsideenadigun8387
6 жыл бұрын
i sent you a mail regarding the mic. please check it out. thanks
@modustrial
6 жыл бұрын
Just replied.
@LeeSangLVS
5 жыл бұрын
like a halo I couldn't believe my eyes
@Darieee
6 жыл бұрын
Awesome work ! In future, if you want to clean up your equaliser setup - this chip seems to be used by a lot of people : MSGEQ7
@modustrial
6 жыл бұрын
+Darieee thank you!
@modustrial
6 жыл бұрын
+Darieee and yes, I have a few of those chips...just a matter of finding time to figure them out :)
@Tomulisss
6 жыл бұрын
Modustrial Maker Hi, a great video. I'm in trouble with the problem or not, but the switch button needs to be turned on when it is turned on, because I do not know if it should be or not? pleazy help.
@modustrial
6 жыл бұрын
Thanks! I'm not sure I understand your question, could you please elaborate a bit more?
Still having trouble understanding what you are asking. Are you asking if it is in the configuration where the light is on normally, and goes off when depressed? In my build, that is how it is wired.
@bibeksaha9182
4 жыл бұрын
Will it work on 8*8 led mattrix
@modustrial
4 жыл бұрын
You would have to edit the code
@kayots
3 жыл бұрын
How much did this cost to make?
@VishanAmarnath
6 жыл бұрын
i saw this project in Arduino project hub
@modustrial
6 жыл бұрын
Glad you came by to check it out!
@VishanAmarnath
6 жыл бұрын
can you please subscribe to my channel ; )
@nedos7847
5 жыл бұрын
What happened to his iron? 7:50
@Earths_wonders
6 жыл бұрын
nice
@modustrial
6 жыл бұрын
Thanks much!
@carloscubix1488
6 жыл бұрын
hello my friend has how to do another video showing step by step how to connect arduino in the left led matrix I really liked your project more do not know where to start could help me
@modustrial
6 жыл бұрын
Hi Carlos, I'm not sure I understand your question. If you are looking for more details, then I'd suggest starting with my full written tutorial on Instructables: www.instructables.com/id/Bluetooth-Speaker-W-Music-Reactive-LED-Matrix/
@carloscubix1488
6 жыл бұрын
hello friend I took a look at the sit you sent me anyway so I did not understand anything please I would like to make vidio showing from scratch that only project led matrix
@carloscubix1488
6 жыл бұрын
how to send code to arduino how to make step to paaso starting zero matrix led
@modustrial
6 жыл бұрын
Oh ok, if you just want to make the LED matrix, check out the video and instructable do or my LED table lamp. It is basically just the LES matrix,
@tishantdas8125
6 жыл бұрын
how did u made the sound Reactive LED Matrix with arduino ????
@modustrial
6 жыл бұрын
+Dj Azzling see the video description. The code for the Arduino is there, and electronics are shown in a diagram near the end of the video.
@ryanstewart6121
6 жыл бұрын
Cool beans
@modustrial
6 жыл бұрын
Thanks!
@bobkeller8383
5 жыл бұрын
I would buy your ardueno led matrix all built and programmed. I can do the speaker but the matrix is beyond my capabilities. Is that something you would do?
@modustrial
5 жыл бұрын
Hi Bob! Sorry, I don't sell my builds....just make them for fun and sharing here on KZitem.
@bobkeller8383
5 жыл бұрын
@@modustrial do you know of any matrix that are ready to use for sale? This is exactly what ive been looking for.
@modustrial
5 жыл бұрын
I'm actually not aware of any that are small like this. I have seen some really large ones designed for DJ booths, but that is it.
@tubeDude48
6 жыл бұрын
The Mega seems like an overkill. Why not Uno or Mini?
@modustrial
6 жыл бұрын
The Mega would be overkill, except for the size of the code. There wasn't enough memory an an Uno or Nano.
@darshitdarji3217
5 жыл бұрын
Are you winner in Instructables LEDs contest?
@modustrial
5 жыл бұрын
Yes, this was one of the winners
@darshitdarji3217
5 жыл бұрын
Your projects are inspiration for me... Check out the Quadcopter l had made... kzitem.info/news/bejne/l213vZ1qbJV9dpg
@modustrial
5 жыл бұрын
Glad I could inspire! The quadcopter looks cool....I'd love to get into some more gadget and electronics at some point, so this gives me ideas.
@pingpongkong98
6 жыл бұрын
How were you able to hook up the laptop power supply to the sound board? did you cut the barrel attachment off to reveal just the wires?
@modustrial
6 жыл бұрын
Yes, and no. I built five of these, and for some I used a 19.7V power supply, for others I actually used a 24V power supply (although they recommend 19.7V, the Dayton board is rated for supplies up 24V). The barrel on the laptop power jack was bigger than the standard size, so I cut it off, and soldered a smaller male power jack onto the wires (making sure it was rated for at least 6A of current). The 24V power supplies had the correct jack so there was no need to modify these.
@pingpongkong98
6 жыл бұрын
I'm new to electronics and am trying to figure this out. Does the Dayton board have a barrel in for the laptop jack fit in on the power cable to power it?
@modustrial
6 жыл бұрын
Kudos for jumping right into this project! No, the power cable that plugs into the dayton board just has bare wire on the other end, so you have to connect it to something. I connected it to the female power jack on the back of the box (via a splitter). The female power jack on the box goes to a splitter that runs directly to the dayton board, and to the step-down converter. This way I just plug the male power jack into the back to power everything.
@pingpongkong98
6 жыл бұрын
Thank you! i appreciate the help! i'm mostly trying to figure out how the blue tooth speaker part works first before the LED
@modustrial
6 жыл бұрын
No problem. I was actually going to recommend that. If you break it down in steps, I think this project is definitely doable for a beginner. I suggest: (1) Watch videos by Kirby Meets Audio and Soundblab and use them to build a basic bluetooth speaker with a Dayton board. (2) Watch Cine Lights VU meter build videos to build an LED VU meter like he did. Natural Nerd's audio reactive lamp is also good, but Cine-Lights electronics are closer to mine since he also uses a momentary push button. My code is a mashup of code from Cine-Lights, Natural Nerd, and a few people over on the FastLED Google+ forum. (3) Put it all together in one build with LEDs integrated in a speaker box. This is basically the path I took to get to this speaker, and doing each part separately before putting them together was definitely helpful.
@RobNO
4 жыл бұрын
No way to make the sound reactive without a microphone?
@b9robot01
6 жыл бұрын
Hello Modustrial Maker I still think this is a great project and for now I will assume my problems are with the cheap ebay Arduino Mega clone I have. I am going to spend a few bucks more and get a real one. I have taken the 16 16 display and built your beautiful diy "Living Art" table lamp. Please check my comments and praise on that page, I didn't think it should be discussed here.
@modustrial
6 жыл бұрын
Thanks! This one takes some effort and troubleshooting, just add one component at a time and make sure that each is working before adding another on, and you'll get it up and running.
@alpha_pixel_
6 жыл бұрын
Add a passive radiator...speakers are too small
@david.h.bonifide
5 жыл бұрын
I need one of these in my life. How much?
@modustrial
5 жыл бұрын
Thanks! I don't sell my work, just provide the videos and guides to help ppl make their own
@fabiod9965
6 жыл бұрын
Can you provide a parts list
@modustrial
6 жыл бұрын
Fabio d most of the parts are listed in the video description. Let me know if you have questions after you check out those links.
@j0main877
6 жыл бұрын
where are the code and here is the building parts?
@modustrial
6 жыл бұрын
See the video description. The code is via the Github link, and part links are all there.
@InfraredEric
4 жыл бұрын
Hi, excellent work. Would you be willing to sell me a box?
@modustrial
4 жыл бұрын
Thanks much! Unfortunately, I don't have time to do commission work at this time.
@SCARECROM
6 жыл бұрын
you are good in electronics and a good wood worker but you're bad in acoustics :)
@modustrial
6 жыл бұрын
+SCARE CROM lol, thanks! And yes, I know the acoustics aren't optimal. I've made improvements since filming, based on viewer comments to fully seal the speaker enclosures, and to add polyfill inside the enclosures. Any other specific suggestions to improve the acoustic design? I'm always looking to learn and improve....
@SCARECROM
6 жыл бұрын
ahah well you know i'm building a portable speaker too (a 160W one, active bi-amplification with 2x 12v batteries) and i learnt a lot about acoustics. what i could say is that passive speakers (=radiators) are the best way to improve low frequencies; i mean that's really better than a bass-reflex. you should install radiators with your speakers in order to improve bass instead of just closing it (sry for my english)
@SCARECROM
6 жыл бұрын
also you should make a speaker for low frequencies (=woofer) which works with tweeters (high frequencies) and you just separate the audio spectrum with a passive filter (10$ on ebay) so your speakers will work better
@modustrial
6 жыл бұрын
Cool, I'll definitely look into that. I'm planning another speaker build (although it will plug into the wall) for sometime during 2018.
@modustrial
6 жыл бұрын
+SCARE CROM yea, I'm thinking about that...I want to figure out a cool way to hide the subwoofer, like in a piece of furniture
@nxy6123
6 жыл бұрын
It is nice but german Title but English Video???
@darnellsprmla47
3 жыл бұрын
I found some amazing plans for Woodglut. Just check them out.
@Xenooni
6 жыл бұрын
ikea screws!
@modustrial
6 жыл бұрын
Nope, got my brass screws from Amazon. Does Ikea sell the same ones?
@thomasralfenson2684
3 жыл бұрын
Make it wooden with the help of the Woodglut instructions.
@b9robot01
6 жыл бұрын
I have started building this great project and have run into a snag, every time I attempt to load the sketch onto me Mega 2560 R3 I get the following error message "Arduino: 1.8.5 (Windows 10), Board: "Arduino/Genuino Mega or Mega 2560, ATmega2560 (Mega 2560)"In file included from C:\Users\Jim\Documents\Arduino\Baby_Speaker_FINAL\Baby_Speaker_FINAL.ino:1:0:C:\Users\Jim\Documents\Arduino\libraries\FastLED/FastLED.h:17:21: note: #pragma message: FastLED version 3.001.008 # pragma message "FastLED version 3.001.008" ^c:\program files (x86)\arduino\hardware\tools\avr\bin\../lib/gcc/avr/4.9.2/../../../../avr/bin/ar.exe: unable to rename 'core\core.a'; reason: File existsexit status 1 Error compiling for board Arduino/Genuino Mega or Mega 2560.This report would have more information with "Show verbose output during compilation" option enabled in File -> Preferences.you have any ideas on what might be happening here because I have run out of ideas.
@modustrial
6 жыл бұрын
Are you using an Arduino mega? Also, did you install the FastLED library for Arduino?
@b9robot01
6 жыл бұрын
Yes and Yes
@modustrial
6 жыл бұрын
It looks like some error with FastLED.....there is a very active FastLED group on Google+, I would post the error there and see what they say.
@Askytwo
6 жыл бұрын
chemfer? D:
@Przylutowany
5 жыл бұрын
bardzo fajny film.te ledy to zajebisty pomysł.ja ostatnio zrobiłem boomboxa który ma wbudowana chłodziarkę do napojów jak masz ochote to zerknij kzitem.info/news/bejne/yGaoy5N-j5pnhYI jaką kamerą nagrywasz bo bardzo ładny obraz masz
@HacksterIo
6 жыл бұрын
Would love to see the tutorial on Hackster.io!
@modustrial
6 жыл бұрын
That would be very cool! Can you shoot me an e-mail so we can talk about what is involved? I still have to do the electronics for three more of these, and could generate the media content for a tutorial while doing so. If you can't tell, I'm much better at documenting woodworking, concrete, and such, as compared to the electronic and coding aspect. But, I am always trying to learn, and a tutorial for Hackster would be a good excuse :)
@modustrial
6 жыл бұрын
Actually, I think I figured it out. I'll try to get this put together soon!
@HacksterIo
6 жыл бұрын
Ah, you answered before we could reply! That would be awesome. It's fairly straightforward, though let us know if you have any problems!
@modustrial
6 жыл бұрын
Yup, I just signed up. It is on my to-do list for the holiday weekend!
@godtot2847
5 жыл бұрын
необычная штуковина вышла) а вот тоже интересная блютуз колонка kzitem.info/news/bejne/zn6YvqiesZ5kh6Q
Пікірлер: 301