I punched this manifold and had to return it because it did NOT fit in a 335xi looks dope im actually getting mine put in next week.
@blrn54
4 жыл бұрын
Polishing turbos is a bit old school. You will have to re do your fuel map after installing intake manifold so dobt go beating on it straight up. I had to up all my fuel scalars after installing Plazmaman one.
@BVonBuescher
Жыл бұрын
Prob too late, but I go with paint. I just bought some Cerakote, they have a ceramic coat that air dries no oven needed, and it is equivalent to a powder coat. I plan on doing my engine, oil pan, and any other areas I can access while my engine is out. I’ve got a zinc/copper color, red and matte black to work with!
@famousmidnight
3 жыл бұрын
The FF manifold is worth is just for looks. so much cleaner
@Salvantos
3 жыл бұрын
What did you do to extend the throttle body vacuum line to reach properly
@hitstothebrain3288
4 жыл бұрын
I got the same one in black for my single 135i, makes everything look better in the bay!
@TheFuelChannel
4 жыл бұрын
I agree, huge difference!
@el.africano2156
2 жыл бұрын
Can fit that intake in 135 is n55 custom or modificación parts
@ronellpemberton5402
3 жыл бұрын
Paint the manifold! 💪🏾
@dejandadude
3 жыл бұрын
i've never heard a bmw sound like a civic
@BVonBuescher
Жыл бұрын
Haha … beat me to it! I was wondering what the hell was going on, then I saw the pull string in back and if all made sense!
@pindypkkung
2 жыл бұрын
This make better looking and durability.
@jerichotomlin5356
5 ай бұрын
This is an old video but im having the same problem with the rad fan. What did you end up doing?
@e46m3lol
4 жыл бұрын
I think you should powder coat the turbo and manifold pink!
@TheFuelChannel
4 жыл бұрын
Hahaha
@e46m3lol
4 жыл бұрын
Looks bad ass!
@88budz
3 жыл бұрын
That monster is nice but it's like nearly 300 calories, the ultra fiesta is banging imo and like 15 calories
@Bad_m340i
Жыл бұрын
Did you install the phenolic spacer?
@Gongdeadman
3 жыл бұрын
I didn’t see any flame from that civic
@S58PSHIFTING
3 жыл бұрын
Are you serious bro? You purchased a beautiful piece and now you want to paint it ok, you just of just left it stock in that case, It looks great as it is.
@TheFuelChannel
3 жыл бұрын
Lol
@grvyrdgang5672
3 жыл бұрын
I want to Install this style manifold on my E36 but I don’t understand how the idle control valve and the fuel rail lines would work
@Jackasauras99
4 жыл бұрын
That E46 sounds terrible
@obiedaatiyani409
2 жыл бұрын
Link to the coils bracket please?
@baautosgarage528
2 жыл бұрын
Does the aluminium manifold fits on bmw n52
@troy335i3
2 жыл бұрын
How much more horse power does The manifold gives you
@Xx5oulTak3rxX
3 жыл бұрын
What’s the update on the power steering bracket location how’s it looking
@LMLracing
3 жыл бұрын
Were did you get the harness extension for the Throttle body???
@bamsr9051
3 жыл бұрын
I have a few questions for you. 1. You change the fuel line to AN fitting? 2. The 2/3 vacuum line to which hose? 3. Cable to throttle body need to extend?
@TheFuelChannel
3 жыл бұрын
1-Yes 2- one to my bov, one to fpr, one to oil catch can 3-Yes
@tony.nextlevelrides
6 ай бұрын
I have the same manifold to install, did you run into any issues with the throttle body being rotated 90 degrees clockwise? tune remained the same?
@whaws
5 ай бұрын
Where did you buy this? It’s sold out everywhere/backordered
@tony.nextlevelrides
5 ай бұрын
@@whaws I got it used off the N54 group in the states.
@whaws
5 ай бұрын
Which group by chance? Are you referring to a Facebook group? In a bunch that I check daily and can’t seem to find anyone ever selling anything decent
@mperez9745
3 жыл бұрын
Have you or anyone else done a before and after dyno of the manifold?
@TheFuelChannel
3 жыл бұрын
I have not
@AshwinLB
3 жыл бұрын
How did you fix the radiator fan issue
@TheFuelChannel
3 жыл бұрын
Had to trim the shroud
@elieghattas2091
3 жыл бұрын
Hey man what brand charge pipe did you’ve I can’t seem to find one
@pngxnate6426
2 жыл бұрын
try arm that’s what i use
@samp7288
4 жыл бұрын
Do you have a video on your catch can setup?
@TheFuelChannel
4 жыл бұрын
No, but I have the kind I have on the description
@wrecker4267
3 жыл бұрын
What fuel pressure regulator system is that? I see you have fuel it lines but down day Wich FPR
@TheFuelChannel
3 жыл бұрын
It’s Fuel-it as well.
@Train_ReK
4 жыл бұрын
What radiator do you have? I was thinking about going CSF is that what you have?
@TheFuelChannel
4 жыл бұрын
Yeah CSF
@DkKristie
4 жыл бұрын
What is the difference between this one and the Doc manifold which one do you think is better ?
@TheFuelChannel
4 жыл бұрын
This one is cheaper. Docrace is cast, and this is aluminum sheet, not sure the comparison in flow
@dolphinfan1493
4 жыл бұрын
Hey, bro i just got the manifold for my 335is installing now, Can you tell me the size is the last bigger port of the 4 on the back of the manifold and what did you run the bigger port with the big vacuum hose to? are you using it with your pcv setup?
@TheFuelChannel
4 жыл бұрын
I think the bigger one was 3/8 and I use it with my pcv.
@tonymaia7498
4 жыл бұрын
Polish the turbo
@ginette1u1suck
3 жыл бұрын
Hey bud, Im in the same situation as yours on the radiator and rad fan. Can you tell us what you ended up doing? I also have a csf rad and will be installing the forward facing intake from bmp soon. Thanks man
@ginette1u1suck
3 жыл бұрын
I just saw that you shaved the shroud, you have a picture by any chances to see how much that needs to be trimmed? Thank you
@TheFuelChannel
3 жыл бұрын
Sent me a message on IG, I’ll see if I can take a picture now. Didn’t take a picture while it was off. The_fuel_channel
@snivesz32
3 жыл бұрын
So how did you handle the radiator?
@TheFuelChannel
3 жыл бұрын
Had to cut some of the fan shroud off
@alaasaleh2572
3 жыл бұрын
Why you had to change the charge pipe?
@TheFuelChannel
3 жыл бұрын
Doesn’t fit
@alaasaleh2572
3 жыл бұрын
Thanks! Got it! and What is the difference between forward facing and stock? Is it just cosmetic?
@TheFuelChannel
3 жыл бұрын
@@alaasaleh2572 I haven’t done a before and after dyno, so I’m not sure if there are any power gains
@mexicointentfilms725
22 күн бұрын
@@TheFuelChannelwhere did you get chargepipe from??
@imestia7911
2 жыл бұрын
Is it m54 motor?
@TheFuelChannel
2 жыл бұрын
N54
@GrowLegal420
4 жыл бұрын
Remove the fucking BOV and install the fan then reinstall the BOV FFS
@TheFuelChannel
4 жыл бұрын
Doesn’t fit, I had to trim the shroud on the fan in order to fit
@DSWGamingMCSG
3 жыл бұрын
Where does the fuel like from the port injection to on connect to the rail? Did u have to make a custom one or did u use the one with the fuel it kit
@TheFuelChannel
3 жыл бұрын
Connects to the back, and had to make a custom one or you could pick one up at precision raceworks
Пікірлер: 70