In this video I show how to replace the front brake pads and discs including the ware sensor on a BMW 216 2016 model year. Link to buy Big Grips, amzn.to/389NbM1
Just purchased a BMW Gran Tourer 216 and looking for videos on maintenance and repair. - Excellent commentary throughout this video - Thanks
@aaanton11
2 жыл бұрын
Glad it was helpful! Thanks for the great comments👍🏻👍🏻🛠
@ASSK555
3 жыл бұрын
Best video I’ve seen on KZitem. Thanks. Would not recommend copper grease tho.
@aaanton11
3 жыл бұрын
Thanks for the great comments👍🏻👍🏻🛠
@valeriomarinelli5033
2 жыл бұрын
Great video! thank you from Italy. My suggestion: use a safety stand to avoid the risk of car falling while you are working (and remove your watch ;-) ) I like the copper grease it is magic solution against weee noise Ciao Valerio
@aaanton11
2 жыл бұрын
Thanks for the great comments👍🏻👍🏻🛠
@Nedxr777
20 күн бұрын
Really useful, thank you
@aaanton11
20 күн бұрын
Thanks for the great comments👍🏻👍🏻🛠
@avocado71
4 ай бұрын
Did you ensure you got the inner and outer pad in the correct place? They are slightly different. The 'nipples' on the back are closer together on the outer pad.
@aaanton11
4 ай бұрын
Yes, Thanks for the great comments👍🏻👍🏻🛠
@hansreijmerink947
5 ай бұрын
Thanks. Helpfull👌
@aaanton11
5 ай бұрын
Thanks for the great comments👍🏻👍🏻🛠
@user-yb2tp4qf1r
3 ай бұрын
You don't use cooper grease on the sliding part, that is why you have an uneven wear.
@aaanton11
3 ай бұрын
Thanks for the great information👍🏻👍🏻🛠
@pomelodrive21
5 жыл бұрын
Nice video mate, 😊😊😊📹📹📹👍👍
@aaanton11
5 жыл бұрын
Thanks for the great comments 👍🏻👍🏻🛠
@cabbarcemozdemir8674
3 жыл бұрын
Dude i am very pleased to see a very good descriptive video like this. thanks. i would like to learn the brand of the srewdriver that you are using which is like a stick. very best. =)
@aaanton11
3 жыл бұрын
Glad you liked it! Here is a link amzn.to/2VaXYnv Thanks for the great comments👍🏻👍🏻🛠
@SBOReeves
3 жыл бұрын
Hey - cheers for the instructions, really clear and well delivered. I'm doing this job today on a 2015 1.5 Diesel Active Tourer and it's gone well... Except - my pads are now binding really badly on the same side that gave you trouble. I've had the carrier off, filed it free of debris and refitted it - the pads definitely move freely. I've also just replaced the piston and seal in the calliper as I thought that was the issue. It's as if once the brakes are applied, the piston on that side sticks. Any ideas? I'm scratching my head! I don't think the pads were sticking before but can't be sure - I tried the old pads in the cleaned carrier and it still sticks. I've seen online that the ABS pump can cause issues with brakes sticking on this car but I would think that this would affect all wheels.... It's all very odd!
@aaanton11
3 жыл бұрын
Most likely issue is to be the flexible brake hose cracking from the inside effectively causing a restriction holding the fluid to the calliper, this usually happens when the hose has been clamped to tightly in a previous repair. Thanks for the great comments👍🏻👍🏻🛠
@THISDONTSTOP
5 ай бұрын
Title mentions discs being changed but only pads shown on video
@aaanton11
5 ай бұрын
Thanks for the great information👍🏻👍🏻🛠
@Mohamed-mb3lc
3 жыл бұрын
Great content mate ! Merci beaucoup
@aaanton11
3 жыл бұрын
Thanks for the great comments👍🏻👍🏻🛠
@jiayihchoo9482
3 жыл бұрын
Can u show more videos BMW f45 regarding the engine part replacement anything else , more my BMW f45 club house in Taiwan would see yr video ..
@aaanton11
3 жыл бұрын
will do, Thanks for the great comments👍🏻👍🏻🛠
@57Smilden
Жыл бұрын
Nice job. do'in that tomorrw. Thanks
@aaanton11
Жыл бұрын
Good luck! Thanks for the great comments👍🏻👍🏻🛠
@EppingForest304
5 жыл бұрын
I stopped using copper grease on brakes years ago... I only use Ceratec brake grease (made by TMD i.e. Pagid, mintex, textar)
@aaanton11
5 жыл бұрын
I will look it up, thanks for the great information 👍🏻👍🏻🛠
@EppingForest304
5 жыл бұрын
It's available at EuroCarParts. I also recommend using brake cleaner, quickly dissolves the caked on dirt/dust
@samforsey
5 жыл бұрын
Why wouldn't you use the pit to lift front end up? And sit with legs in pit? Good videos! Cheers Sam
@aaanton11
5 жыл бұрын
It was a nice day😎, thanks for the great comments 👍🏻👍🏻🛠
@Pa-hy1te
2 ай бұрын
Do you have to replace the screws?
@aaanton11
2 ай бұрын
You can reuse the old bolts, Thanks for the great comments👍🏻👍🏻🛠
@Pa-hy1te
2 ай бұрын
@@aaanton11 thanks! :)
@jiayihchoo9482
3 жыл бұрын
BMW 216 and 218 more videos pls
@aaanton11
3 жыл бұрын
will do, Thanks for the great comments👍🏻👍🏻🛠
@Ikakaal
4 жыл бұрын
Thnx mate
@aaanton11
4 жыл бұрын
Thanks for the great comments👍🏻👍🏻🛠
@jiayihchoo9482
3 жыл бұрын
F45 and f46 more video pls
@aaanton11
3 жыл бұрын
will do, Thanks for the great comments👍🏻👍🏻🛠
@theblackheathpointer
Жыл бұрын
Great video.. Thank you!! Could I ask if you could post info on pads used please?
Пікірлер: 43