Do you have to buy the clamps separately or does it come with the exhaust tips?
@12stNizZop
2 жыл бұрын
Can these fit on a 2009 bmw 328i sedan?
@keano9542
2 жыл бұрын
Yes just get the smaller diameter tips
@ProcTech
2 жыл бұрын
I just cut the pipe at the stub. Helps to stick the new tips a bit further in so you can't see it inside the new tips. I see the WA plates. I'm in Vancouver. Where abouts are you from?
@FOURTEEFIVE
Жыл бұрын
they are not 63mm, the inner diameter is 63mm but not the outer
@infernalGotYou
3 жыл бұрын
It’s way too much talking for my taste..
@hsuray1986
3 жыл бұрын
do you know if these would work for the F32 2018 440? Non-M performance should also work on the 63mm?
@keano9542
3 жыл бұрын
Yes they will!
@hsuray1986
3 жыл бұрын
@@keano9542 I think these were advertised for M2/3/4 series, but good to know they would fit our B58. They also have larger fitments like the 67/70mm, but good to know the 63mm would fit.
@alenmujic9584
Жыл бұрын
would the 63mm fit on a 2017 f36 440i
@natebuckmiller3375
3 жыл бұрын
Love the look! Exactly what I’ve been looking for. Quick question: do you recall how much room you had to come back further on the pipe if I get a different diffuser that sticks out more than the OEM one? After market diffusers can leave the tip recessed which looks bad so trying to see if this would accommodate sliding back. Thanks!
@keano9542
3 жыл бұрын
If you get a diffuser you will have a ton off room for adjustment! These tips can really stick out so you won't have any issues. The disfusser would have to stick out a ton to hide the tips.
@luciankendrick6642
3 жыл бұрын
instablaster.
@garydeandeery
3 жыл бұрын
My exhaust don’t come out level and tried everything one pipe sits in just a little more. So going to try something like this my tips now are 89mm hope I can get them to fit over and make level
@keano9542
3 жыл бұрын
When you order the tips just make sure you get the largest size. If your exhaust isn’t level try getting new hangers
@garydeandeery
3 жыл бұрын
@@keano9542 if I undo the mid pipe then the exhaust hangs level and I can’t move the cat pipe the shop guy said to cut and weld and bit in to level lol
@ginarivera8849
3 жыл бұрын
I really do not understand why everyone who does an install video for some reason do not turn on the car to hear the sound results, maybe a before and after. 🤔
@justincase00004
3 жыл бұрын
You wont get any sound improvement that is hearable by ear by just changing the exhaust tips sis ☺
@dominikmartinez4748
2 жыл бұрын
Actually the tips are resonated(little holes inside the tip) so they would slightly change the tone of it,either way it would be nice to see/hear for ourselves tho its better for the video and it would prevent the arguing in the comments
@nickdubya9924
3 жыл бұрын
Thanks u answered my question, i have an M performance muffler 60mm OD, finally got my tips but wasnt sure what to do about that metal peg was thinking dremel but the saw it will be
@keano9542
3 жыл бұрын
Yea a good little saw cuts right through
@austinsaju
3 жыл бұрын
Pretty neat garage!!!!
@henryli3800
4 жыл бұрын
What size is your exhaust 63 or 67mm?
@keano9542
3 жыл бұрын
63mm
@RackzzzzMusic
Жыл бұрын
U can put this on any model for 128i
@JustenEdits
Жыл бұрын
Where can i get that little orange saw?
@funart5964
Жыл бұрын
Hey I got it from the same website for my 340i non m performance and I got 63mm, but I tried to install it and it was big and wouldn’t stick on the stock muffler
@funart5964
Жыл бұрын
Am I doing something wrong or should I have gotten 60mm
@LambSlainAtCalvary
Жыл бұрын
@@funart5964 same thing happened to me. Should have got the 60mm
@brianb5558
2 жыл бұрын
Would these fit an E92 328i? Because I’m not sure the diameter size of my exhaust
@keano9542
2 жыл бұрын
If its the stock exhaust, yes!
@benjaminaydin437
2 жыл бұрын
Hey buddy! Would they fit F31 320D 2017 whit twin exaust to the left? 🤔
@keano9542
2 жыл бұрын
I have not seen in person but I did see online that someone did. Get the 63mm tips
@itscj6569
3 жыл бұрын
Does this give extra 50 hp?
@keano9542
3 жыл бұрын
200hp actually
@dderuy
2 жыл бұрын
Saw a black 440 with them the other day, which is why I searched your video. Those look great and even better in person! I appreciate the instal help
@keano9542
2 жыл бұрын
You bet!!
@georges117
2 жыл бұрын
Thank you very much for you video. Hammering out the tip is very easy. It took less than 10 seconds. But sawing the stub was pretty boring. I used the same tool and it took 15 minutes. Nevertheless, It's absolutly necessary to saw it otherwise the tip is too much out and it looks bad. Thanks again !!!
@tumihalfiger
Жыл бұрын
Do you need to be very accurate with the cutting of the stub or make it smoother after cutting?? Thanks.
@nathannegre9461
2 жыл бұрын
Does it effect the sound at all? Or is it for looks only
@keano9542
2 жыл бұрын
Only looks
@ThomasYT-
3 жыл бұрын
Do you have the MPE or standard exhaust?
@keano9542
3 жыл бұрын
Standard Exhaust
@rasharngordon9198
3 жыл бұрын
How silly can you be not to start up the engine so we know how it sounds?
@jordanlegard3764
2 жыл бұрын
Tips don’t change the sound lol
@Richard-np4ux
Жыл бұрын
What size you got my friend?
@keano9542
Жыл бұрын
For the standard exhaust it is the 63mm
@GiaX5
2 жыл бұрын
Out mm?
@sefakarabayir7637
3 жыл бұрын
I have a 440i and i want a black exhaust tip what do i need to do? Is it easy to uninstall my exhaust? And put new on it, or should i do like you?
@keano9542
3 жыл бұрын
No its super easy. The 440i and the 340i have similar exhaust systems. You can pull the tips off your exhaust and and put these ones on. You tighten them down with a socket wrench.
@sefakarabayir7637
3 жыл бұрын
@@keano9542 is the size also 63mm?
@keano9542
3 жыл бұрын
@@sefakarabayir7637 Yes! go with the 63mm
@dmitrijsbeliks9090
10 ай бұрын
Do they change sound at all?
@derekcaron5812
Жыл бұрын
Didn't even get to hear them!! wtf
@titanspkr1
3 жыл бұрын
Is it 100% necessary to saw off those metal stubs? They won't fit far enough on without doing this?
@keano9542
3 жыл бұрын
You don't have to but the exhaust tips will stick out a lot and won't look good.
@titanspkr1
3 жыл бұрын
Ok. Thanks
@ricio_f3026
2 жыл бұрын
I just ran into this today and this video helped so much I was wondering what’s up with that hangar or metal stub. Thanks!
@sergiolara3i
2 жыл бұрын
is these 63 mm by 89 mm?
@keano9542
2 жыл бұрын
63mm
@ArmedTheAsians
3 жыл бұрын
Will these fit on the 2021 XB7?
@keano9542
3 жыл бұрын
Measure the inside diameter of the tail pipe. (Not the muffler tips but the actual tail pipe) If its between 66mm to 63mm they will fit
@dlzmedia2792
3 жыл бұрын
Nice video! Looking at one for my car. Isn't as nice as this car though 😂
@keano9542
3 жыл бұрын
Than you!
@justincase00004
3 жыл бұрын
There are short replica's available where you dont have to saw off your 2 little nobs, also, they cost around, 30 dollars each, I have them, and they look really genuinely! nice video ! thanks for sharing !
@alexc3295
3 жыл бұрын
Hey dude, any chance you have a link to those? Been trying to find tips that look basically like the ones in this video but the nubs on the muffler pipes continue to be an issue for the ones that I’ve found on eBay and other places
@justincase00004
3 жыл бұрын
@@alexc3295 you should be fine with these, I bought them from a local website but cant seem to find it, been a long time. I have the maxton diffuser so the tips come out just as it should be, cheers! Keep in mind that these are 120 mm in lenght, so if your diff is stock they will stick out, I didnt had to remove the nobs because of the diff. a.aliexpress.com/_m0B5kUf
@dlzmedia2792
3 жыл бұрын
I don't see why anyone would buy genuine one
@alexc3295
3 жыл бұрын
@@justincase00004 Hey thanks so much for the reply bro! Super sorry, just saw this after like a month (totally my bad). But awesome! Will check that link out and hopefully order them, really appreciate it 👍👍
Пікірлер: 69