On second thought maybe i shouldn't put a different engine in my e21 🤔
@pedrocruz7091
3 жыл бұрын
hi mate, the car sounds awesome, do you have the full setup list perhaps?
@jayhauss2621
3 жыл бұрын
91mm Ross pistons, 2.0 crank, IE 284 degree cam, Weber 38/38 carb on Cannon manifold, Top End Performance header, IE adjustable cam gear.
@pedrocruz7091
3 жыл бұрын
@@jayhauss2621 Amazing, thanks
@alexandrurunceanu6053
Жыл бұрын
@@jayhauss2621 ❤❤❤
@nehellsracing4099
2 жыл бұрын
Engine power?
@marindjermanov
3 жыл бұрын
Hi guys! How did you mount the carb on the stock manifold? I have an e28 and think of buying the same carb.
@jayhauss2621
3 жыл бұрын
This is a “Cannon” manifold not an original unit. Got it from Ireland Engineering.
@marindjermanov
3 жыл бұрын
@@jayhauss2621 Thank you very much .
@UHOH3300
2 жыл бұрын
You can use an E21 carby or 2002 carby manifold should bolt right up
@zebfail480
Жыл бұрын
What are you using for fueling? Like pumps and management system etc
@jayhauss2621
Жыл бұрын
I swapped out the high pressure pump for a low pressure one, installed in the factory location with factory wiring. Then installed a fuel pressure regulator mounted in the engine bay to get the pressure down to 3psi.
@tonycornuez8697
3 жыл бұрын
Bonjour vous avez mis quelle genre d'écrou borgne ? Pour le cache culbuteur ? Avec rondelle ou sans ? Merci a vous
@jayhauss2621
3 жыл бұрын
Bonjour. Les ecrous se trouvent le cache culbuteur d’une moto Kawasaki. Il y a un petit joint en dessous.
@mickaelsnake6027
2 жыл бұрын
il a mis un borgne @tony cornuez 😅
@77magnuss
3 жыл бұрын
Why doesn’t mine sound like that? 🤔
@pedrocruz7091
3 жыл бұрын
wow im also interested on the setup, sounds amazing
@jimmito74
Жыл бұрын
Hello....a question what kind of carburador you are using??
@jayhauss2621
Жыл бұрын
Hi! It is a Weber DGAS 38/38.
@serhiisaint5711
9 ай бұрын
@@jayhauss2621what you think about solex didta 32?
@jayhauss2621
9 ай бұрын
Sorry, not I am not familiar with the Solex, but the Weber works great.@@serhiisaint5711
@toubgaetan297
2 жыл бұрын
Bonjour ou avez trouvé le collecteur d'échappement svp?
what carb can i put on that motor whit stock manifold?
@jayhauss2621
Жыл бұрын
You need to change your manifold to fit this carb. www.iemotorsport.com/product/cannon-intake-manifold-for-m10-with-2-barrel-weber-carb/
@ryzenx-no1bl
Жыл бұрын
@@jayhauss2621 i said what carburator can i put ? other options ?
@ryzenx-no1bl
Жыл бұрын
@@jayhauss2621 500 dollars for a piece of metal 💀
@jayhauss2621
Жыл бұрын
@@ryzenx-no1bl I have seen them used for $100. Or you can get the entire Redline kit with carb and manifold for about $8-900. You also need to plug the injector holes.classiccarbs.co.uk/product/weber-38-dgas-carburettor-conversion-kit-bmw-2000-2002-ti-m10-engine Or call Ireland Engineering and they can get you set up.
@ryzenx-no1bl
Жыл бұрын
@@jayhauss2621 can i put a plate to adapt them ? or made a custom manifold ?
@lourimibechir4327
3 жыл бұрын
Weber 32 34?
@jayhauss2621
3 жыл бұрын
38/38
@wrenchingmatt8501
2 жыл бұрын
Why would you m10 swap an e30 that came with a m42 or m20 from factory?
@jayhauss2621
2 жыл бұрын
Mechanical Matt, this car came with an M10, M40's were not in production until '88 followed by two years of M42's. The M10 is looked down upon by many who don't know the history but it a great power plant with lots of tune- ability. It is also the heart of the M3's S14 engine and it is with that spirit this engine was built. Makes for a light, high revving quick little car that is really fun to drive, a poor mans M3 if you will.
Пікірлер: 37