Okay, okay I know it's late. I had to take a trip to the UK so I'm a week behind. But you can expect the videos to pick up big time very soon. I have a video ready for the second channel so head over and sub with the bell on! The name of the channel is going to change so don't get confused. I'm excited to have two channels going, anything none car-related will be going on the second channel. The machine shop I am using is pretty busy, so I might restore some of the other parts in the meantime to keep the videos coming. Enjoy!
@TheMeanestGuy
5 жыл бұрын
Restore It Now will you be restoring all these parts, including bolts. Or if they are too damaged will you just get new ones?
@maxhilton6819
5 жыл бұрын
What is your second channel?
@RIS533
5 жыл бұрын
@@maxhilton6819 Steve,s Workshop.Go to the restoreit home area and there is a heading 'channels' click on that and it is listed. no content yet
@bobtoelle2795
5 жыл бұрын
I really admire what you're doing ... keep it up. Of course, for a tough job like this, at some point you're going to need a guy with tattoos to help ...
@niek7808
5 жыл бұрын
I had a question; way are you now restoring this bmw instead of your other bmw?
@Kurosaki990Ichigo
5 жыл бұрын
Crankshaft bolt 30NM, oil filter 160NM. Whoever serviced this engine was a genius.
@Cowley46
4 жыл бұрын
Oil filters are quite often hard to remove despite being tightened by hand at the service. Seems perfectly normal to me.
@CarsOverdose
5 жыл бұрын
Can't wait for part 3.
@dukagjin2850
5 жыл бұрын
Me to
@ThatBum42
5 жыл бұрын
I appreciate the labeling of the parts, for those of us who have some idea of what's going on but aren't complete gearheads lol.
@grizzly9960
5 жыл бұрын
Im glad you are sending the Block and Head out for professional cleaning and machining.
@WelcomeToTheMadness
5 жыл бұрын
Looking at you doing this makes me want to pull apart the one I have in my garage...
@RestoreIt
5 жыл бұрын
Do it!
@grizzly9960
5 жыл бұрын
@@RestoreIt do it
@grizzly9960
5 жыл бұрын
do it
@Gustav4
5 жыл бұрын
Dont do it
@bostedtap8399
5 жыл бұрын
Do it tonight.👍
@El_rod309
5 жыл бұрын
Anyone else love the satisfying sound of a bolt being broke loose after being tightly threaded for 10 years or more... just me ok
@mirror_6336
5 жыл бұрын
The simplicity of this engine is unique. It is a pity that there will no longer be such motor constructions.
@RestoreIt
5 жыл бұрын
Couldn't agree more.
@aitorbleda8267
5 жыл бұрын
Agree. Now you plenty of plastic parts even inside the engine!
@yarpos
5 жыл бұрын
@john jay only scary if you dont maintain the car properly. If this is scary I wonder what other non scary engine materials you might be thinking of. Are Glock making a plastic one these days?
@MrSaahOG
5 жыл бұрын
That must be the EASIEST crankshaft bolt ever!!
@madmike5144
5 жыл бұрын
that what i was also wonder...When it need 410Nm torgue...
@RestoreIt
5 жыл бұрын
Whoever had this engine before me did some really stupid things to it, so I'm certain this was them haha.
@MrSaahOG
5 жыл бұрын
MAD MIKE I tighten with the third dot on the air gun, never bailed on me. And i still got it of
@MrSaahOG
5 жыл бұрын
Restore It Well some of us have to be lucky, anyway awesome video mate!
@auskeanu
5 жыл бұрын
My thoughts exactly. Almost fell off my chair when i saw that. Then the hammer on the harmonic balancer made me cringe a bit
@2003garyb
5 жыл бұрын
Hey, Steve! You're living your dream! Life is great--doing what you love in a shop you built from nothing! Your courage and determination is paying off. Sweet! You make us all want to venture out and live our dreams. So glad you can start posting more often. Take care, my friend.
@RestoreIt
5 жыл бұрын
Hey Gary! You just reminded me I need to reply to you! Life is so hectic at the moment, but you're right this is my dream. Thanks for the kind words as always Gary, means a lot.
@shapoorasl8647
5 жыл бұрын
Great job. Some activties require extra hands, glad you got one. The machinery shop does all the cleaning needed, but you helped them thats thoughtful of you. I love BMW's, but i dont own one , one day when i get one, im gonna watch your videos ten times a day. Keep up your good work. You sir ,are an inspiration for many people.
@RestoreIt
5 жыл бұрын
Thank you for such kind words, Shapoor, Its people like yourself that keep me motivated to keep going. Thanks for watching and taking the time to write a comment like this. Means a lot.
@bmwe3opassion519
5 жыл бұрын
Love this M20 engine, i have 2 of them 1 boosted 450 HP and 1 natural aspirated, never had problem, love IT
@jonnybravo918
5 жыл бұрын
I am 15 and I like your videos
@RestoreIt
5 жыл бұрын
Good to know :) glad you like them.
@jonnybravo918
5 жыл бұрын
@@RestoreIt big fan since I was 14
@yarpos
5 жыл бұрын
good on you for your interest and desire to learn
@Ali-en5sx
5 жыл бұрын
yesssss i've found you recently and I bing watched your previous videos . i'm already in love with the series . cant wait to see the final product
@RestoreIt
5 жыл бұрын
Thanks, Ali! Good to have on you along for the ride.
@alexandresousa2112
5 жыл бұрын
People , hand tight this type of oil filters please. Thank you
@phille042
5 жыл бұрын
That also happens when you don't put oil onto the o-rings on the oil filters, but that's mostly on trucks and other big engines. Most people, as you say, uses tools to tighten the oil filters on cars for some reason.
@clunk54
5 жыл бұрын
Even with just hand-tightening filters onto these engines, i've found you still need tools to remove- am guessing heat from nearby manifold causes this.
@kingbubbles4509
5 жыл бұрын
I was just thinking to myself that you hadnt uploaded in about a decade. Cant wait to watch it.
@RestoreIt
5 жыл бұрын
It kills me inside not uploading. I am now on a mission to get close to posting every day across all of my channels (more channels coming also). Enjoy it King :)
@kingbubbles4509
5 жыл бұрын
@@RestoreIt It did not disappoint! Thanks for sharing the work you do with us.
@kevinvines1846
5 жыл бұрын
Wow! Look at all those little projects! Can’t wait!
@RestoreIt
5 жыл бұрын
It's restoration heaven!
@RasheedAsfari
5 жыл бұрын
My Best KZitem Channel 👌👌
@RestoreIt
5 жыл бұрын
Thank you, Rasheed, means a lot.
@arnhemseptember2009
5 жыл бұрын
The amazing complexity of an engine like this...
@RestoreIt
5 жыл бұрын
True. And this is one of the most basic 6 cylinders out there!
@arnhemseptember2009
5 жыл бұрын
Its beautiful. Can you imagine the really complex engines...@@RestoreIt
@MapleOrigins
5 жыл бұрын
This thing in the sump you thought was an oil filter - it's actually an oil pressure relief valve
@jacquesgold
5 жыл бұрын
Just a tip @10:16, get yourself a power bar to loosen head bolts. A ratchet is not designed to loosen bolts torqued to that spec & will eventually fail. Same for the mains & big ends... It will also reduce the stress on your arms, wrists etc... If there is 1 thing I hate with my mechanical work, its to battle. Good work so far
@electronic7979
5 жыл бұрын
Excellent restoration 👍 very good
@klei_mouka9087
5 жыл бұрын
You did some unbolt's really wrongly , for example the engine head you need to start unbolting from the edges with a chris cross pattern middle ones should be last bolts you do On UNBOLTING , when you going to tighten them again its the opposite , you start from the middle and then head towards the edges with a chris cross pattern ,the way you did it will cause warps to the engine head , if you are lucky and it wont warp a lot it can be fixed by machining but if it has a lot of warp you wont be able to use
@RestoreIt
5 жыл бұрын
Thanks for the info!
@klei_mouka9087
5 жыл бұрын
@@RestoreIt Yeah no problem , thought just letting you know because we screwed up lots of engine heads by doing it the way you did , i was not sure either you did just a mistake or didnt knew , anyways glad you found my comment helpful ! :)
@stevenbauer7744
5 жыл бұрын
The part you identified as the "Bearing cover" over the oil pump drive gear is actually a plug for the hole the distributor occupied on engines before Motronic controls that started with the E30.
@manofsheerawsomness
5 жыл бұрын
some of the best content on youtube
@RestoreIt
5 жыл бұрын
Thank you, manofsheerawsomness, that means a lot.
@RIS533
5 жыл бұрын
This is going to be a fascinating series. Brilliant.
@RestoreIt
5 жыл бұрын
Thanks, Richard, always good to see you here!
@Isailuck
5 жыл бұрын
Amazing thanks for the inspiration. I started taking my project car apart. And cleaning and making everything look new again!
@RestoreIt
5 жыл бұрын
Thanks for watching Isai and good to hear you're getting stuck in.
@Isailuck
5 жыл бұрын
Shoutout from Los Angeles, California
@hakanyasar8718
5 жыл бұрын
Faster faster faster! Don't sleep don't eat, work work work!
@nathananderson7319
5 жыл бұрын
Insanity alert! Having no sleep can spell disaster you need to plan carefull moves or else something would break like doing a restoration of a engine if you are so drowsy and made one false move then you know what happens next so please think and I know it's a humorous joke but I think it's not funny to me
@m1tch3l41
4 жыл бұрын
Nathan Anderson I can’t remember asking about your opinion tho
@louiabraham5994
5 жыл бұрын
I love these videos, I miss my e30
@dudon.arendse
5 жыл бұрын
Great insightful and no corny repetition music playing.. such a pleasure to just watch and enjoy really 💯😌
@williamfindspeople4341
5 жыл бұрын
An extremely easy tear down. I was surprised that you didn't break any bolts. Looks like you need some tools you don't have. I would recommend a set of "lady slippers". It's amazing how they're put together on an assembly line.
@CookRacingUK
5 жыл бұрын
Loved watching this! I have an E30 (in the picture) and someone is keeping my old knackered M20 engine block so one day I'd love to restore it and the rest of the engine. Your video makes that more realistic!
@RODZILLA65
5 жыл бұрын
So, You already found you a good machine shop in Spain. I bet you are enjoying the weather in your new digs!
@Neowolf217
5 жыл бұрын
This is so fun to watch. Thank you for naming the parts as you go and taking the time to record/upload this.
@frk380
5 жыл бұрын
Wow all parts are laid down on floor. Looks great 👩🔧👍
@RestoreIt
5 жыл бұрын
So satisfying isn't it.
@suziemack7269
5 жыл бұрын
I know nothing about cars but I just love watching your videos. Thanks.
@sicmuful
5 жыл бұрын
the best thing today happened
@bimmerwman
5 жыл бұрын
I have never seen one of these engines that needed rebuilding. Mine has 500,000 miles on it and still runs great. I sold it to a friend that still drivers it regularly. It never had an alternator, Power Steering pump, or Clutch either. Transmission has never been removed from the car. LOL. They last an absolute lifetime.
@makosasimakis118
5 жыл бұрын
Most wanted video in the world !!!!
@Republic3D
5 жыл бұрын
I had the thermostat, timing belts, pulleys and water pump replaced on my E39 520i about 10 years ago for 1000 USD / 800 Pounds including parts and labour. It must have been quite the good price considering how much work it is. Thanks for the video and keep up the great work!
@alexnussbaumer3059
5 жыл бұрын
Since I'm watching your videos I started developing an urge to just follow the same steps you do on my own car... It seems so easy, even though I know it isn't! And the precision and attention to details you have... it is insane :D Can't wait for the next video!
@bearstephens6722
5 жыл бұрын
Absolutely LOVE your videos!! Can’t wait to see everything to come :)
@TheJulien57000
5 жыл бұрын
Seeing all the parts on the floor at the end and knowing all the goods that are going to happen to them... I cannot wait for part 03 !! Great video, like always !
@patriciomunoz2830
5 жыл бұрын
The head bolts must be losen from outside to inside same with the crank ones
@AdilAaronAkhtar
5 жыл бұрын
Not on this engine or M5x engines either
@besartmaksuti9726
5 жыл бұрын
This is the best KZitem & Chill channel! Literally eating snacks and stuff while watching!
@alcyoneeridani8137
5 жыл бұрын
Yeeeeyyyy...new episode Good luck bro..cant wait part 3👍
@RestoreIt
5 жыл бұрын
Thank you, Alcyone!
@Rapas4U
5 жыл бұрын
*Just sooooo cool !!! 😁👍*
@Tony-112
4 жыл бұрын
Invest in getting breaker bar(s) , saves your ratchet from getting wrecked & gives you more leverage 👍🔧
@50sKid
4 жыл бұрын
Wow, all the bearings have almost no wear. I can't even believe it. With how dark that engine looks I figured they'd be trashed. Btw, never store a crank shaft horizontally--could introduce warp. Machine shops always store them standing.
@Ugnaught82
5 жыл бұрын
I rebuilt a Chevrolet Truck engine once, with my bother-in-law. When we put it back together, there were two bolts left over that we couldn't account for where they went. It drove us crazy. The engine ran fine and we tossed them into a jar hoping we'd figure it out later. When I sold the truck a few years later, I passed along the two bolts with it.
@gabrielormenez4764
5 жыл бұрын
Best channel of KZitem!! I am a brazilian guy and like so much your videos because you show step by step of the works. And, of course, restore only awesome cars (BMW E30). My english isn't so good, sorry.
@Lameosity
5 жыл бұрын
Never clicked so fast in my life
@BrianOfAteionas
5 жыл бұрын
Exciting! Can't wait to see the next order of business.
@GeorgeEI7KO
5 жыл бұрын
Love it Steve! the montage at the end was like the exploded view diagrams in the very old Haynes Manuals I used to read as a child. You know, the ones with the drawings rather than the photos. Can't wait to see you getting through it. It will be like new when finished. You might as well knock out the frost plugs and replace them while you're at it mate.
@coolissimo69
5 жыл бұрын
The wait was worth it, welcome Bro you make me so happy with your videos.
@sudd2685
3 жыл бұрын
So happy I found your channel really nice work young man thank you for your videos
@lrdisco2005
5 жыл бұрын
Respect for laying out all the engine parts, must have taken ages.
@bostedtap8399
5 жыл бұрын
Engines are definitely more complicated than the carburettor ones I last worked on, massive improvement in power and emissions though with turbocharger and EFI etc. Love the engineering of any engine though. Thanks for sharing and best regards from a warm Uak
@StuHaightVideo
5 жыл бұрын
Great work! I'm amazed how many parts look exactly the same on my M21 diesel.
@_i-kr6eg
5 жыл бұрын
The Ikea M20 rebuild . Sweet as mate 👍
@fafican9919
5 жыл бұрын
Finaly!
@jordi3599
5 жыл бұрын
Finally the engine🙏
@thefaredevil
5 жыл бұрын
Brilliant videos man! love the annotations and all
@miksle
5 жыл бұрын
Dont know why.. but i love the sound the bolt makes just as it releases.. «SNAP»
@christopherpappas7474
5 жыл бұрын
I can't wait to see you tear assing around in this car when it is finished! :)🇬🇷😀☮️
@RestoreIt
5 жыл бұрын
Me either! Thanks, Christopher
@michaeltchilds
5 жыл бұрын
I’d love to know how you keep track of all the parts and bolts when you take them off. It may be fun to see a video about that.
@bahaaabdeen2014
5 жыл бұрын
Sooo crazy episode Can't wait for next episode Don't be late please
@vkgarage
5 жыл бұрын
Well, good work. I look forward to continue with impatience.
@AnubisPrime79
5 жыл бұрын
Nice job, keep up the great videos.
@TheDumry
5 жыл бұрын
When putting back your conrods, you could cover the big ends with plastic or rubber. That way you won’t scratch up your freshly ground wall and/or crank.
@limelightperformance
5 жыл бұрын
All the e30 guys and girls thank you 🙏🏻
@harrykourm2462
5 жыл бұрын
That's a lot of work, nice job so far, can't wait to see it all done!
@motheolebelo
5 жыл бұрын
Been patiently waiting for this video upload and glad you had a safe trip to UK. Looking forward to the build, thumb up so far.
@FIGHTERMAVERICK
5 жыл бұрын
Wow the M20 is such a simple engine....I think I am going to take mine apart now!
@JimGriffOne
5 жыл бұрын
19:20 - Wow, such a simple engine! You don't see that with more modern cars. THOUSANDS of components in them, with emissions control devices and sensors up the wazoo. Good luck with the restoration. Hope it's going well. :)
@yarpos
5 жыл бұрын
you would love working on stuff from the 60s and 70s then, much simpler than this. Very little plumbing and wiring :-)
@welcome2myworld1.o89
5 жыл бұрын
So are you going to be making videos of cleaning and restoring EVERY part!? Or no? If so! Good luck! And I can not wait to see them all!
@alexanderjakobuss4886
5 жыл бұрын
I would love to see a video about how you organize the parts that you remove because there must be so many different things you have to organize!
@alonzosanchez8577
5 жыл бұрын
Nice I've Been Waiting For This Great Video Brother!!
@yumesle1
5 жыл бұрын
YES! FINALLY ENGİNE RESTORATİON
@RestoreIt
5 жыл бұрын
More videos coming more often from now on!
@SteelBlueBody
5 жыл бұрын
Can't wait to see this engine restored 100%
@MarreFromKazzak
5 жыл бұрын
An M50B25 would be perfect for your car
@RestoreIt
5 жыл бұрын
True, but I'm going for a factory finish
@REPOMAN24722
4 жыл бұрын
I didn't know BMW made a belt driven motor? And that engine is clean, maintenance must have been exceptional.
@boltonky
5 жыл бұрын
Lots more to come exciting, not looking forward to my next tear down i don't have spare garage space so turns into chaos. Also don't forget to do "Core plugs" on block for some reason i noticed heaps of BMW engine rebuilds miss them and good way to check outside of cylinder walls. Also please try make it higher compression if running NA for little more fun, once its apart there is only minor difference in cost
@duzst
5 жыл бұрын
6:10 😂 "story of my life" I was crying at that point. I feel your pain, while I doing my e46 M3
@mrk896
5 жыл бұрын
Awesome video.. a suggestion if you don't mind.. dont use the ratchet too often when loosening bolts. I always use a breaker bar followed by the ratchet handle. So far, my ratchet handle has lasted almost 20 years.. other than that, you're doing a pretty good job.
@becomematrix
5 жыл бұрын
That part washer is going to have the time of its life.
@EdwardOskarsson
4 жыл бұрын
Bmw with a flat rocker cover gasket. Mind blown.
@leyuoo3338
5 жыл бұрын
Heck yeah, new episode
@Pexyz
5 жыл бұрын
Nice to watch! Well done! I will keep following
@edwinveening8537
5 жыл бұрын
time for some forged pistons and a big ole spooli boi
@ivandelgado7654
5 жыл бұрын
So satisfying, thanks for doing my night...
@Belozw
5 жыл бұрын
next episode next week? cant wait man! awesome job!
@Farseer1995
5 жыл бұрын
You give me motivation to one day try out a rebuild on a 1.8t. Good luck!
@Tobberobbe97
5 жыл бұрын
12:10 probably a oil pressure valve, when the pressurised oil circuit runs all the way through the system and reaches the end of the pressurised side, there's a restrictor which maintains a set oil pressure. It's like taking a water hose and pressing the end together to increase pressure.
@towlie911
5 жыл бұрын
Check that the idle valve elbow on the throttle body isn’t leaking. The factory epoxy cracks and it loosens up. I would heat it up, pull it out and re-epoxy just to be sure. Otherwise you’ll never have a good idle
@CILLREC
5 жыл бұрын
need more video😍
@RestoreIt
5 жыл бұрын
More coming faster than ever before!
@CILLREC
5 жыл бұрын
Restore It videos are cool :) interesting to watch. Hurry up and collect the bmw Waiting for the engine assembly, I think one of the most interesting videos will be:)
@tayfunuysal7972
5 жыл бұрын
Looking forward to the next video with excitement. Even my 2-year-old son watched without blinking 😂😂
@leroihill4202
5 жыл бұрын
This is a proper job. Can’t wait to see all of the projects and the finished project.
@RestoreIt
5 жыл бұрын
Thanks, LeRoi! I'll get it to you as fast as I can!
Пікірлер: 482