Id say some weight reduction can help a bit aswell
@benjaminmasl3988
5 ай бұрын
I'm so stoked I'm picking up my 330 this weekend can't wait to finally get into the drift game!!!
@bigmoneyrhd6584
Ай бұрын
How is it going I just got 328 and looking to see what I should do to start
@Z0G3L
Жыл бұрын
Getting my 01 325i ready for drifting the vids give me so much motivation !!
@jspeedracing
Жыл бұрын
Let’s goooooo! That’s awesome dude
@miroslavkandra2391
Жыл бұрын
I had all of my bushings replaced for red duraflex. Litle expensive but it was worth it.
@packlifedogtraining1237
25 күн бұрын
Pickingup my first bmw, and an e46 tomorrow . Thanks for the tips and advice. I'm ready to party 🤘
@tcd759
15 күн бұрын
enjoy it man I picked up a high mileage 325ci and I love it just needs a little love on the maintenance but it’s pretty solid for being over 200k miles
@Vgedzo
Жыл бұрын
great work guys :D ive put a 4.1 diff from an X3, although we have really short smaller tracks in Greece so that helps
@jspeedracing
Жыл бұрын
Great info
@Yonelll_Kim
Жыл бұрын
What year x3 😮
@corvo46
5 ай бұрын
@@Yonelll_Kime83
@Hardcorhustler
Жыл бұрын
That's the dream man, drifting with ur homie and making similar builds. Very dope 👌
@jspeedracing
Жыл бұрын
Thanks brother 👍
@RTMunroe
7 ай бұрын
Nice work guys! Appreciate the info and the footage! And you covered the rear subframe mounts, definitely something that Needs to be done. My question is what are you doing for cooling water and oil? Surely the temperatures are climbing. And careful changing only the transmission mounts, all the mounts should be of the same material or you risk breaking either the transmission case or croscrossmember due to twist. Or it could never happen, that's cars for ya! Any LS swaps or forced induction in your future?
@sydewayzmo3905
Жыл бұрын
I personally didn't like the 3.46 ram it for a year and went back to 3.38 on a 330i. I'm gonna look into an LSD swap because these welded diffs last me about a year or two at a time.
@benjaminmasl3988
5 ай бұрын
Great video keep them coming
@splatz1218
24 күн бұрын
you guys should try the Armageddon trans and engine mounts they are solid alu so no movement at all . might cause strain on other stuff but im not sure.
@colehammond9146
5 ай бұрын
don't forget about the manual transmission and the upgraded expansion tank! aaaaaaaand drilling out the oil nut but yeah 🤣
@erlanmirlanov5987
10 ай бұрын
Thnx for the vid maaan. Can i drift the 4door 328i 2000??? Looking forward to your reply guys
@Quacob999
Жыл бұрын
Can you daily the car with these mods?
@chrisvlogz6206
5 ай бұрын
I see so many bmw drift cars but I also hear about bmw problems. What's the secret man 😂I've never owned one and don't know where to start
@jacksonkillilea
3 ай бұрын
If you do the maintenance they’re perfect. These are pretty old now so almost all of them need the cooling system gone through because it’s probably original. Same goes for oil filter housing and oil pan gaskets. Probably the valve cover gasket as well. But as long as you aren’t leaking oil or coolant and not overheating you’re fine.
@soconoha
2 ай бұрын
All cars need maintenance. All cars have pros and cons, easy and difficult mods/services... Find a car you like and learn to maintain it. Mods can be done to any car.
@neoknight14215
29 күн бұрын
All I can say is that restoring a car, doing good maintenance on schedule is gold. Once you do that you will be happy.
@aaronbell5743
6 ай бұрын
Would an 03 325ci 6 cyl with manual work out for a drift car? I'm new to the sport...
@mackmiller4309
6 ай бұрын
330ci will save you a lot of time and money
@colehammond9146
5 ай бұрын
yeah it'll be fine. The b25 can handle the abuse for sure
@cesarbaxter9368
2 ай бұрын
u drift stock clutch and with cltuch delay valve?
@hacketronics8464
11 ай бұрын
I have a question, isnt filling the rear tires at 80 psi just pop them or something since most tires are rated at 50 psi max?
@Jarevalo81800
5 ай бұрын
How did u deal with the abs sensor when installing the dual caliper adapter. Thanks 🙏
@erykkilianek1111
Жыл бұрын
What kind of chassis reinforcement do you recommend? I'm planning to do underside reinforcement plates, vince bar, gusset cups, and later on a Kbrace for the rear. For the front I am going for a strut brace, and strut tower reinforcement plates.
@jspeedracing
Жыл бұрын
As much as possible if youre gonna drift it.
@erykkilianek1111
Жыл бұрын
@@jspeedracing Thanks! Yep that's the plan, full send!
@isaiahwatkins3944
6 ай бұрын
What kinds of exhaust do you have on it
@cichandler833
5 ай бұрын
Do you guys run a 300 tw or 200 tw tire? Or something else?
@Lexdrifts
Жыл бұрын
How many events have you done on the cnc71 angle bracket? How often do you bolt check? & do you just use OEM torque specs? I only ask because forum guru’s only have negative comments but I’ve seen similar kits on other chassis that work great and Id like to add some angle. It’s pretty much this or the full SLR/mantis kits which are over 10x the price 🤣 Love the videos!
@jspeedracing
Жыл бұрын
We've done about 4-5 events with the angle mods. We do bolt check our cars before every event. I think it came loose once. But not bad. We tightened them like you would any lower control arm nut. We also use lock tight. For the money, this is sooooo worth it. Don't forget the condor offset bushings. It makes a ton of difference.
@DomZaa
Күн бұрын
Are they made from Aluminium? The high difference in thermal extension might be a reason then.
@ruffraff4697
Жыл бұрын
Help with understeer abs kicking in try the sensor remove try the dsc nothing works
@jspeedracing
Жыл бұрын
Pull relay
@wessamyaacob1505
Жыл бұрын
Awesome! What is the horse power of the Engine ? and What is the minimum horse power I can get for E46 coupe to fit in drifting mods for beginner ?
@jspeedracing
Жыл бұрын
Hey man, the 330i makes 225hp. I would highly recommend going for a 330i compared to the 325i etc.
@300C_Meek
Жыл бұрын
@@jspeedracingthat was my mess up i have a 325i trying to get it to that 220 mark with an all motor build
@mrmalavey1098
Жыл бұрын
Toe brackets and a decent seat
@jspeedracing
Жыл бұрын
Oh yessss
@kevincorrales5129
Жыл бұрын
What did y’all do to disable traction control and ABS
@46god
Жыл бұрын
just hold the dsc button for 5 seconds until you see the yellow brake light lol if you want it permanently disabled you unplug a wheel speed sensor
@ruffraff4697
Жыл бұрын
@@46god is not that easy we still have the red brake light without the sensor the light comes right back up when you drive off, still trying to figure out
@46god
Жыл бұрын
@@ruffraff4697 hmmm well i read i think it has to be the front right wheel speed sensor my g try that if you didn’t already. i haven’t done it though i just hold my dsc for a couple seconds every time i get in haha never drive w that dsc sht on things no fun can’t get that rear end kicked out
@napsE46
Жыл бұрын
have you ever had any problems with snapping axles or diff output stubs? ive broken well into the 20's of both, albiet i am boosted but i run like 65psi on 225 18's, im thinking since i dont have camber arms the angle when the car squats is too much for the axles or something
@jspeedracing
Жыл бұрын
Not really man. I’d for sure try the camber arms. Get that geometry a little better 👍
@407_ryan8
Жыл бұрын
by chance do you have an aftermarket trans guibo?
@46god
Жыл бұрын
you need to run axel spacers i got mine from seems legit garage they help get less stress on the axels
@roberttrisca8210
Ай бұрын
diff and coils .
@rikardokwiatkowski7998
Жыл бұрын
With engine is better m52tu b25 or m54 2.5?
@Shawnoddou
7 ай бұрын
M52tu is better imo. The engines are almost identical apart from a few things. The oil rings are a bit thicker so you wont have oil consumption issues that M54's do with high mileage (200k miles plus). From what I've heard the way that they made the aluminum blocks are a bit better than they did with the M54's. theres micro bubble pockets in the M54 blocks that make it easier to fail when the engine gets hot. And theres a few other minor differences as well. I just boosted my M52tub25 with 260k miles and have driven it 500 miles so far without any issues
@exit_dj
3 ай бұрын
Get a m52 2.8. You can tune it with some tweaks to have exact same power as 3.0 . M52 series better for things like the guy before me said 👌
@ghostvardy6693
Жыл бұрын
Definitely need at least a stage 1 tune to drift on a 330ci, on a 325ci id say stage 2
@colehammond9146
5 ай бұрын
nah you'd need a stage 36.5 at least
@kimdotnet8151
Жыл бұрын
Anyone run a 3.46 on a 6 speed b25? Wondering how the gearing is. Just bought a 325i with a ZF 6 speed swap. Has a misfire and open diff so can’t exactly test it out yet lol
@46god
Жыл бұрын
it will be perfectly fine my homie runs a 3.46 on a 5spd
@welieseah
8 ай бұрын
3.9 is the best, 3.46 is under power😢
@G35.devan_
11 ай бұрын
Bro was at cams
@jspeedracing
11 ай бұрын
Yessir
@jamesthebond0072
Жыл бұрын
They don’t have much power? Aren’t they in line6s like supra engine lol
@jspeedracing
Жыл бұрын
225hp
@TimursYT
Жыл бұрын
Yooo
@jspeedracing
Жыл бұрын
What’s up dude!!!!!
@TimursYT
Жыл бұрын
@@jspeedracing how you been man
@jspeedracing
Жыл бұрын
@@TimursYT been good brother. Busy with stuff but still finding time to make some videos! How have you been?
@TimursYT
Жыл бұрын
@@jspeedracing been good bro!
@acidriott
11 ай бұрын
Great video! Made me subscribe! Do you have a reddit, discord or Facebook group you can point me to so I can learn more? Please and thank you.
@jspeedracing
11 ай бұрын
Lots of good fb groups
@anthonynavarrete8856
Жыл бұрын
I wanna get into drifting but got a sedan isn’t the coupe and sedan weigh the same amount
@Paul.mcdouble
Жыл бұрын
Same chassis and weight reduction always helps
@jspeedracing
Жыл бұрын
Sweet man!
@868drive
Жыл бұрын
I've just done an rb20det swap into my 318i sedan. I did the subframe reinforcements and custom transmission cross member to fit the nissan transmission mount. Custom engine mounts and fitted new BMW engine mounts. I'll consider doing the handling mods you guys did next.
@kkulturen
Жыл бұрын
Any videos on this car???😮
@868drive
Жыл бұрын
@@kkulturen nothing yet. I didn't film any if the build as I've been doing it in my spare time. I'll do a recap on everything once it's done.
@kkulturen
Жыл бұрын
@@868drive would fs be cool to see!
@TomBiesma-o1j
Ай бұрын
Dit you swap the input shaft of the diff ?
@baybaydrives
9 ай бұрын
thanks guys
@bralavo
Жыл бұрын
I see you guys go to cams! Hope to see you there maybe sometime, I'm currently building my E46 sedan to go out there this year!
@jspeedracing
Жыл бұрын
Hey man! Sweet! Make sure to come say hi!
@infinitewars6373
Жыл бұрын
clutch delay valve thought e46 had it too...best mods don't think so.....
@xd_tadashi7623
8 ай бұрын
google knows what i don't yet, i got recommended this
@Nielsuu
Жыл бұрын
damnn but gonne place it for me tho lmao seems complicated
@benggazi
Жыл бұрын
Same for e36?
@jspeedracing
Жыл бұрын
Yes, very similar. I have another video I did a long time ago on E36 setup.
@SE7EN1Studios
10 ай бұрын
This might seem like a stupid question but I haven't been able to find a definite answer on TCS, ABS and STM on the E46's. Do y'all have a process you do to disable all 3 on your E46 drift cars? I know you can hold the button for traction control and I have seen people remove fuses but was wondering what the best practice was. Thanks.
@jspeedracing
10 ай бұрын
Cut a wheel speed sensor
@jspeedracing
10 ай бұрын
Or unplug lol
@SE7EN1Studios
10 ай бұрын
@@jspeedracingsweet! thank you! :)
@infinitewars6373
Жыл бұрын
rear boot arm :DDDDD face palm.....
@swmo_SS
Жыл бұрын
if i was looking to swap an auto out for a manual would you recommend finding a 5 speed from an e46 or the 6 speed from the e90s?
@jspeedracing
Жыл бұрын
5 speed would be easiest
@kuma7526
Жыл бұрын
You have some power on the 330Ci. I would say that you have no power on a 320i or 318i. That's no power
@jspeedracing
Жыл бұрын
Haha that’s facts! Here in the states we didn’t get the 4 cylinder E46.
Пікірлер: 99