That front seal for the trans pump looks like it was leaking. That could cause the slippage when the fluid thins out when warm it starts peeing out the seal and no pressure to shift. Clutch plates are probably shot now though. Full tear down and inspection if you want to tow stuff. There is a KZitemr who does these ZF and other trans tear downs, Gary Ferraro, he does good trans videos.
@mevlut10yildiz60
Жыл бұрын
Selam.Cevaplarmısın lütfen? x5 4.4lt e53 kullanıyorum.2003 model.Araç belli bir süre hareket ettikten sonra dururken 1.vitese düştüğünde sallantı oluyor Aynı zamanda ilk harekette drive 'd'konumuna aldığımda yine aynı şekilde sallantı oluyor.Cevap bekliyorum lütfen
@purplecty740
3 жыл бұрын
I have the exact same Imola X5 4.6iS but a Dinan S2. Best X5 ever!
@MrMagsimus
3 жыл бұрын
Lol 😂 Fxxk everything thing else I admire your honesty about forgetting to unbolt the torque converter , for the record I will neither confirm or deny that I’ve done that (cough cough ) 😅 you are a brave guy ha ha 👍🙏🏼🇬🇧😄
@glennarnold3970
3 жыл бұрын
the range module on the right hand side of the box is prone to fail when the car gets hot loss of gears
@ZeroTo60Tube
3 жыл бұрын
Good to know! Seems they do have quite a few common issues. However loosing drive in 1st to 4th when warm is normally something clutch a, related. We'll know soon anyway.
@glennarnold3970
3 жыл бұрын
@@ZeroTo60Tube if you google x5 range sensor problem then go to autoblog ,com there is a nice article on all the problems a range sensor can do to a x5 tranny helpful read
@corteman
3 жыл бұрын
That would be a ZF5hp-24A for all wheel drive vehicles😁
@MrCybergladiator
3 жыл бұрын
Good work, looked like it wasn't too challenging to get out. Looking forwards to seeing the next video (I know I'm running behind)
@matthewdavis8435
Жыл бұрын
Gday mate. I’ve got an 05 e53 and the trans feels likes the seals need redoing. Would you pay the $4k+- on the trans rebuild? 😊
@cornfedboost
3 жыл бұрын
Ahhh autos... my arch nemesis.. at least you'll get it sorted man will be a nice car once you fix that bit 😊🤘 you need a trans jack tho sooo much nicer to work with...
@MrAlec201178
3 жыл бұрын
Well least thats the easy bit done now onto the witchcraft thats inside an autobox 😂, hope your feeling better now andrew👍🏴
@armyvet92
3 жыл бұрын
Creative Criticism --- Spend more time on TASK and show your work, and PLEASE stop rambling on - on - on
@ZeroTo60Tube
3 жыл бұрын
Hey man, thanks for the criticism, input is always appreciated. Have a great weekend. Oh but i do like to ramble haha. Its my passion, no scripts to get views here, just some car people sharing what we get up to.
@joshbrennan8545
3 жыл бұрын
Nice vid mate!
@krzym15
2 жыл бұрын
Hi.. Question.. Could you move the car without the gearbox?? I mean if I remove gearbox can I push the car anyhow - I cannot leave the car on the lift.. Thanks
@ZeroTo60Tube
2 жыл бұрын
Yes you can.
@igotaction
3 жыл бұрын
Cannon plugs those round connectors are called cannon plugs
@joshbrennan8545
3 жыл бұрын
Yes!! First!
@ZeroTo60Tube
3 жыл бұрын
Yes you are!
@patricwell8335
3 жыл бұрын
Really easy to removed and to rebuilt
@johannyrodriguez5730
3 жыл бұрын
You guys are just about ready to open up a BMW repair shop.
@Zsword92
3 жыл бұрын
Good stuff guys. Love a bit of variety :)
@ZeroTo60Tube
3 жыл бұрын
Thanks man. I definitely like learning about the different models and how things work.
@Efortysicks
3 жыл бұрын
What happened to it bro
@TheGermanHammer
3 жыл бұрын
“There’s no play in the guido’s” Wow, no need for name calling! . How did you even know I was Italian? 🤔🤣
@mcmillinpead
2 жыл бұрын
Well thanks for ur vids 0-60. My x5 is slipping when oil is hot too and it has had delay thud moving from p to d a couple of times lateley when hot too. I am not getting a engine light and no codes either this issue has started after a missing fault (two coils replaced) and both front CV's. No noise to speak of moving through the gears whilst stationary. The last time I drove it I accelerated out of a dip and it slipped making a noise as if the tires were spinning then clunked into gear (it was like a bowling ball in the boot feeling). My passenger thought it was tire spin noise but not a chance on dry bitumen in an x5. I am suss on the shaft between the transfer case and the front diff any ideas or guidance would be good if anyone has had these probs with thier bmw
@ZeroTo60Tube
2 жыл бұрын
It sounds like internal oil pressure issues in the trans just like this. I’d been looking at getting the box apart
@MrFabeRick
3 жыл бұрын
👍👍👍
@StratoJohn
3 жыл бұрын
Good vid 👍🏻 Get yourself a hard hat haha
@cameronrussell9362
3 жыл бұрын
9 minutes? I feel ripped off!
@KC-wo2qe
3 жыл бұрын
👍
@rueben68
3 жыл бұрын
Can’t wait to see “what the cheese” with this transmission
@finlay230
3 жыл бұрын
Gonna be a great machine, its mint 👌👍
@1993kawasaki
3 жыл бұрын
you will have to take this beast roll racing
@ZeroTo60Tube
3 жыл бұрын
What's that? We need to supercharge it and run it on e85.... hmmmm good idea
@garypankhurst9014
3 жыл бұрын
Put manual box in it
@ZeroTo60Tube
3 жыл бұрын
Do you know if a manual awd box that would hold the V8 power? I thought the x5 manuals were only in the 6 cylinders.
@benperkins2929
3 жыл бұрын
@@ZeroTo60Tube 6 cylinder manual ZF box would hold it, but I don't think they bolt up.
@uisperfectemail9720
3 жыл бұрын
I don’t know if it’s different than the gas 6cyl, but it possible the one fitted to diesels was beefed up for torque.
@purplecty740
3 жыл бұрын
You can probably convert it to a RWD 6 speed manual using an e39 6speed gearbox but you will have to customize the driveshaft and have a bit of custome programming done since the 4.6iS v8 never came as a manual or RWD. xoutpost.com/bmw-sav-forums/x5-e53-forum/90835-4-6is-6-speed-manual.html www.xoutpost.com/bmw-sav-forums/x5-e53-forum/67540-01-x5-4-4i-6spd-manual-11.html
@maxgr7723
3 жыл бұрын
@@ZeroTo60Tube there is a special conversion Adapter available to Mount the atc transfercase to the 6speed 540/m5 gearbox of the m62/s62....thats the way to do it properly...was designed for an other 4.6is conversion
@cocko1135
3 жыл бұрын
Talk about sucker for punishment! Let me know if you would like help with paint (clear coat peel...). Best of luck brother.
@ZeroTo60Tube
3 жыл бұрын
Definitely keen!! Happy to pay too. Will need to get it to you for your professional opinion on the best way to sort it.
@cocko1135
3 жыл бұрын
@@ZeroTo60Tube considering that you aren't that far away i could manage a trip down, the Mrs always wants to go to Sunshine Plaza anyway.... I wouldn't expect you to have the X5 on the highway man.
@cocko1135
3 жыл бұрын
@@ZeroTo60Tube I will also be uploading a vid on my "Paint Correction" and ceramic coating efforts shortly as well.
@ZeroTo60Tube
3 жыл бұрын
@@cocko1135 that would be brilliant. Would you mind shooting an email to zeroto60tube@gmail.com and we will sort out some contact details. You're welcome to stop in for a coffee or beer anytime.
Пікірлер: 52