BMW F900XR Akrapovic Titanium exhaust sound The DB-KILLER has been replaced by another model(akrapovic v tuv108) with a larger aperture,photo at end of video
@linxinli6468 ¿hay mucha diferencia entre el mivv que llevabas al akrapovic de ahora?
@user-wr4yt8gb5o
10 ай бұрын
To remove the serial one, you have to unsolder the screw, or how to remove the serial db killer, thanks, regards
@juovert
10 ай бұрын
Can you please explain how your usb and phone mount are set up?
@jorgechinea2502
9 ай бұрын
Hola, el db killer v-tuv 108 encaja perfecto? Yo compre el v-tuv 227 y el tornillo descansa mas arriba y es mas chico , en las medidas que tu compartes se ve que tiene 65 de alto, y cuanto tiene de ancho? No piedes poner fotos de como queda instalado?
@linxinli6468
9 ай бұрын
Buena.El 108 encaja perfectamente, y los agujeros de los tornillos también quedan perfectamente alineados.La altura es 70 y anchura es 50(igual que el db killer original),me puesto mal la foto en video.También compré el 227 antes, pero era mucho más pequeño.
@jorgechinea2502
9 ай бұрын
Perfecto , gracias por responder tan rápido, hay alguna manera de que me envíes una foto puesto?
@linxinli6468
9 ай бұрын
aqui: kzitem.infoeJtPlriU0qI?si=7OC3WQI2_UlvVA36
@jorgechinea2502
9 ай бұрын
@@linxinli6468mil gracias, lo estoy pidiendo ya 🎉🎉por lo que veo viene sin tornillo ni tuerca
@user-wr4yt8gb5o
9 ай бұрын
Podrías poner enlace de donde lo comprastes ,no lo encuentro , gracias un saludo
@scaredhuntA87
5 ай бұрын
buenas, he reservado mi 900 xr hace unos días, me podrías decir qué cúpula y que soporte de movill llevas? gracias!
@linxinli6468
5 ай бұрын
La cúpula es de wuderlich,soporte de móvil es de sp-connect y la Barra para soporte compré en aliexpress
@user-wr4yt8gb5o
10 ай бұрын
para quitar el de serie hay que desoldar el tornillo, o como se retira el db killer de serie ,gracias un saludo
@linxinli6468
10 ай бұрын
Simplemente use una muela abrasiva pequeña para moler la punta de soldadura en el tornillo y luego use una llave de vaso de 7-8 mm (no recuerdo exactamente) para quitar el tornillo. tienes que hacer una agujero de 12mm en capa carbon con broca para metal.Les comparto algunas fotos para que vean:photos.app.goo.gl/YLdExv4iFMMzHjpK6
@user-wr4yt8gb5o
10 ай бұрын
Muchísimas gracias
@arnomaas6452
2 ай бұрын
The video would have been great in only we weren't staring at the aluminium clip of the screen extension and the gps mount right in front of our faces all the time !
@klander2kabuki
3 ай бұрын
Hola, guapisima la Moto, es una pedazo de Burra, veo que estas por Andalucia, podrias decirme que carretera es?
@linxinli6468
3 ай бұрын
Hola.Esta carretera es A-402, entre velez-malaga y ventas de zafarraya en la provincia de málaga. Un saludo
@klander2kabuki
3 ай бұрын
@@linxinli6468 Muchas Gracias!!!, es que el año pasado estuve por la zona y me sonaba mucho....
@cesarb1625
10 ай бұрын
I think the quickshifter is very soft, isn´t it?
@linxinli6468
10 ай бұрын
No, the quickshifter is very hard😂
@Bertok19
9 ай бұрын
@linxinli6468 Da la sensación que el cambio es suave, yo el que probé era muy duro, por eso no se lo puse. ¿Has tenido problemas con el?
@MuLLeR004
8 ай бұрын
Why don't you use the full rpm range? 5-6k & shifts. That's not much :(
@oncsaba
5 ай бұрын
It is a twin engine, there isn't much happening above 6K, most of the power and torque is around 4-6K I think, so there is no point revving it out.
9 ай бұрын
How tall are you and what is your inseam?
@linxinli6468
9 ай бұрын
I am 1.62m tall and my inseam is 73 cm
9 ай бұрын
@@linxinli6468 Do you have the factory low seat? I have about the same inseam and sat on one in the dealership and it was very tall for me, so I would like to get the low seat.
@linxinli6468
9 ай бұрын
@ Yes I have the factory low seat, but I purchased the wuderlich comfort seat (low version) and it is much more comfortable than the factory seat.
9 ай бұрын
@@linxinli6468 how have you enjoyed the bike overall with the aftermarket low seat? I want an f900xr and id have to get a low seat, but I cant decide if I should go for the factory one or a aftermarket one like you have
@linxinli6468
9 ай бұрын
@ I have been using the Wunderlich seat for three years. I am very satisfied with it. It is not too uncomfortable when riding for a long time. I feel uncomfortable after riding with the factory seat for half an hour.
Пікірлер: 33