Glad it helped. Be sure to LIKE and subscribe. THAT will really help me! THANKS!!!
@robocog
3 ай бұрын
Thank you - gone from an 2007 E90 to a 2016 X1 F48...I was worried when I couldn't code read it, restarted the laptop several times and wiggled the OBD but got the same "vehicle not found" type messages Flipped the switch from the left hand side where it has always lived and worked... and can see all its faults now! Damn...quite a list to work through
@micdev42
3 жыл бұрын
Hi. This was very helpful. I have a similar cable with a 3-way switch that is wired the other way so 1 = D-CAN while 2 and 3 are K-Line. Even so your video was a real help. I have a 2007 E93 so I need D-CAN so position 1 on my cable. Thanks from the UK
@tim47275
2 жыл бұрын
Why so complicated? Just Pin 7,8 open: cars from 2007 (D Can) Pin 7,8 shorted: cars till E39 (K Can)
@skrigz
2 жыл бұрын
Helped tremendously I have been looking everywhere for this info thank you so much!
@FSandberg
2 жыл бұрын
its so hard for people to give a straight answer. LEFT = working.
@Radek__
3 күн бұрын
some of the bmw need to switch to right to work. lets say that 70-80% of bmw needs to keep the switch on the left, and the 30-20%bmw need to keep it on right. I have D+CAN cable but White transparency color - and the switch works opposite - I need to keep it on right to have 7 and 8 connected.
@ecavity
3 жыл бұрын
Interesting to see that there is a 4 position switch version of this coding cable. In my case there is just a 2 position switch (So I guess I have the premium, more expensive version ;-) ) .... I also guess that in my case the position is just K -left and DCAN right. I will see if it works.
@j2tmfc
3 жыл бұрын
Best explanation I have seen thankyou
@gman103
5 ай бұрын
I just noticed my USB data lines are different from yours, looking at where the cable comes in, mine is black, white, green and red and yours is black, green, white and red... I wonder if this would cause a data disconnection🤔
@kinqturkey38
2 жыл бұрын
i have the same one with 4 switches. i can read my bmw e60 with it. if i switch the position, can i decode other cars like mercedes benz or vw?
@souk-tv
Жыл бұрын
Can you tell if it's possible to use this cable with any other vehicles as a OBDII reader?
@antiochiaadtaurum3786
3 жыл бұрын
It does help me. Thanks
@YuDaMan
3 жыл бұрын
be sure to LIKE and Subscribe. that would really help me. THANKS!!!!
@antiochiaadtaurum3786
3 жыл бұрын
@@YuDaMan you got it bro, I will do
@otomanyakemosschrauberkuch5936
2 жыл бұрын
Correct 👍 very helpful
@Dan-pj9wr
Жыл бұрын
Hello i have 1 bmw e90 from 2005 and i have 1 adapter like you have whit 4 slides so whitch position i should put that
@mucahitmervangulcan870
7 ай бұрын
What did you do for e90. I have also cable but there is no switch
@MrRoundel
5 ай бұрын
I'm curious as to whether my OBDwiz cable that is USB/OBDII, is a K cable? I do know that it works with the OBDwiz software that's on my laptop while connected to my E39. That being the case, it seems that my cable will work with INPA, etc. Sound right? Thanks to YuDaMan, or anyone else who can clarify.
@johnparadise2353
4 жыл бұрын
Thank you.
@Franco7564
4 ай бұрын
To bmw e46 330ci 2004 Who is the correct position ?
@vitek310
2 жыл бұрын
I have the same exact cable and it works fine with K-can vehicles even when the switch is moved to the right side. But it doesn´t work with D-can vehicles. Somehow ISTA-D just says "Vehicle could not be identified, check Vehicle interface And PAD active"... Any suggestions? Is it possible that only 1 communication channel is broken?
@timothy680921
Жыл бұрын
I have this as well. Please can you advise?
@sors1599
2 жыл бұрын
What position should I be In Using INPA on 2006 e90?
@andreig8895
9 ай бұрын
Left, the K Line
@GoodSoupCup
Ай бұрын
Is there anyone that can share software for this device?
@marcod184
3 жыл бұрын
What cable do you recommend? And where can I buy one?
@YuDaMan
3 жыл бұрын
no brand in particular ....ebay or aliexpress
@MrOnlymoin1
9 ай бұрын
thanks
@bigtex144
4 жыл бұрын
Hello friends! I have a 2000 M5. Just wanted to make sure I'm clear... Is E39 position 1? Or the other positions 2-4? This video seems to imply that K-Line is position 1 and for E39 (and other pre-2007 cars), but on another video I'm watching, it says position 1 is for E60/E90 (and he goes on to use the cable on his E60 in position 1). I feel like neither video directly says which is which, but they both strongly imply the opposite lol. (for reference, starting at 3:10: kzitem.info/news/bejne/xYiX02VmqJerdqw) Just hoping to make it crystal clear :) Thanks everyone!
@Salty_Legionnaire
3 жыл бұрын
And did you ever figure it out? I hear if you use the wrong setting it can misalign DME and EWS.
@andreig8895
9 ай бұрын
Until 2007 BMW used K Line and from 2007 it used DCAN Line
@Doctor_88
4 жыл бұрын
So what are they position 2,3 for if position 1 is for cars to 2007yer and position 4 to car up 2007.But what i use position 2 and 3?
@YuDaMan
4 жыл бұрын
2, 3 and 4 are all exactly the same ... it doesn't matter. position 1 is for K-line, 2,3 and 4 for DCAN.
Пікірлер: 37