For anyone else doing this, you do not need to remove the pin that limits the travel of the shaft toward the inside of transmission. You can't hammer it through, and pulling it out is not usually as easy as shown here. So I go to put this goddamn thing back in, and the detent rod fell out of the transmission. It just kind of flops around and can come out without any trouble. Pushing up on the thing you suggested does nothing to help get it back in place. Is it supposed to 'snap' into a secure place or something? What was that click you mentioned when reinstalling.. Any help here would be greatly appreciated. Thanks
@sefakrmt2353
26 күн бұрын
Ekranda vites gostergesi kayboluyor, bazen P bazen N bazende R kolu biraz oynayınca zorda olsa ekran geliyor. Ekranda yazmazsa topallama moduna geçiyor. Selector swinc benim sanzimanimda nerede acaba GM SANZİMANA sahip bmw e46 n42 3.18 yardımcı olursaniz sevinirim😢
@datwanwatson5279
6 ай бұрын
So I read your description, have the same ‘s’ problem .. but all fuses have been checked and none have been burnt out.. is there another reason why/how this could happen?
@Lefteris7
6 ай бұрын
Even if the fuse isn't burned doesn't mean the neutral safety switch isn't bad. I would say if you can't crank, and you're stuck in s, there's a good chance it's this. Just make sure you buy the correct switch for your transmission (zf or gm)
@datwanwatson5279
6 ай бұрын
@@Lefteris7 I’ve just got a diagnosis and it’s not showing any codes regarding the safety switch .. and are they known to just stop working out the blue.. I started it yesterday morning.. I noticed side view mirror switch was disconnected, reconnected it and that’s when the car stopped starting. It was cranking at first then stopped
@bogusienombre355
Жыл бұрын
You did a great job with this! Your narriations were very helpful to say the least! Thanks to your wife/helper as well. can you share where you got your instructions from and was a fee involved? How much was the switch? Was it o.e.m.? where purchased? dealer? what was trans fluid? Dec 6 or malice? what was sleeve part , number and name? can you link this information to your video for future references.
@DavidCisneros-f6x
2 ай бұрын
that rod came put while i was doing can someone please help?? thank you so mich
@Lefteris7
2 ай бұрын
Look at how I push it back in. It seems intimidating but it simply goes back into its socket. There's only one way to put it in.
@bogusienombre355
Жыл бұрын
thanks for this video. Your right, not much info out on this.
@maximrabah2169
Жыл бұрын
PLEASE HELP OR ADVISE : I have problem with my e46 325i /2001 1-Battery light is on 2-transmission faulty light is on 3- I hear a bang when switching from reverse to drive When I start the car and see this sign faulty transmission , the car can drive on reverse and other gears except for first gear. If I start the car and sign does not show on dashboard, the car only drives on first gear 35 Km speed max. Took it to many mechanics and nobody could fix it. First guy said he fixed alternator and reprogrammed ECM , The second told me to check and change Positon switch which I did today and still problem not fixed .Now they are saying its the alternator which the first guy fixed. I checked the battery its giving 12.4 V and when car started and I hit Benzin pedal it goes up to 13.9-14 Volt .
@Disrupt_ID
6 ай бұрын
good job ! it was better if you open your valve body and solenoids to clean all off it, there is a lot of dirt inside , there are also two mettalic filters inside to clean
@FnGcode
4 ай бұрын
What if it don’t go in reverse and u got a code of p0700
@tengzturiagaiii3185
Жыл бұрын
Hi, does the neuyral switch fuse is on the engine bay. And its in the black box that holds 5fuses all in one box.
@Lefteris7
Жыл бұрын
I'm not sure I understand
@alonsobasualto5854
Жыл бұрын
excellent content, I have to do the same with my transmission. One question, did you disconnect the battery before starting to disassemble the electronic part of the transmission? thank you
@Lefteris7
Жыл бұрын
Yea I recommend it's good practice to do so
@ammy83ammy82
Жыл бұрын
What causes you to change it? i am having a problem My gear is stuck in position s. Even if I move the gear lever to any position The display screen will always show the position s. Is it because this one is broken?
@Lefteris7
Жыл бұрын
The part I replaced in this video is most likely the culprit. As I share in the video I took had "s" displayed in every position and car wouldn't start or engage a gear. What happens is the car thinks it's not in park/neutral to start
@damionhannam2745
Жыл бұрын
I'm having the same issue what's the part number and where can I get it?
@Lefteris7
Жыл бұрын
@@damionhannam2745 please read the description. You need to confirm which transmission you have first as the GM and ZF are different
@damionhannam2745
Жыл бұрын
I have the gm series
@Lefteris7
Жыл бұрын
@@damionhannam2745 great so follow the video and reference the part # in the description
@JayPatel-cb5wq
Жыл бұрын
Hi, Thank you for your video which is amazing. I have the same issue with NSS issue which I have replace but I’m having issue when i lock the rod onto position I can’t move any gears ? Please help.
Пікірлер: 25