As a viewer from the beginning. I am always impressed as this boat gets built, how many variety of skills is necessary to make that a reality. What a story this adventure is writing.
@AcornToArabella
2 жыл бұрын
Thank you, Sonya!
@juanaq
2 жыл бұрын
as marvellous is to see how A2A is making this dream real, i can´t stop thinking on how ancient boat builders built their wooden ships with only manual tools, and without books and internet to use as reference. just astonishing.
@thomasarussellsr
2 жыл бұрын
@@juanaq especially the first ones in a society who used their home building knowledge of timber framing and problem solved from there to make it water tight. Starting from small fishing boats and building ever larger to the mighty sea fairing vessels and tall ships of history with sails that could cover a grand cathedral. And timbers that could have burned for days without burning to the core. Yet, they managed to haul them, not only to the shipyards, but he's them to the shapes needed, notch them together, and get the finished vessels into the water without electric, deisel, or hydraulic powered lifts. Just more logs to roll them out on. Built on these logs, and making sure not to dislodge the chocks holding them in place the entire time the building was going on. Hoisting the ballast stones into the keel and everything. Using rope, block and tackle to lift the cannons onto the decks with muscle and strong backs. Just imagine how much stronger we would be as a civilization if we still worked that way today.
@Coconut620
2 жыл бұрын
BEN ... YOUR EDITING IS AWESOME ... You make the "entertainment" side of this channel so easy and enjoyable to watch. Love the easy transitions, subtle music and or minimal narration. It all makes a difference! Thanks. And to Steve and Crew... Keep Calm and Carry On!
@AcornToArabella
2 жыл бұрын
Cheers, John!
@mrvertigo23
2 жыл бұрын
@@AcornToArabella Can't make good edits without great footage!
@davidwarren9204
2 жыл бұрын
I can understand the attraction to casting all the bronze, but I'm really digging your approach with the tabbed plates for the floors, knees, toe-rail brackets etc. It's an elegant solution that I'm sure would have been very popular with the 'traditional' boat builders, had water jet cutters etc been available back in the day :)
@AcornToArabella
2 жыл бұрын
Cheers! Using what we have on hand, and also we’re lucky to have MS Fabrication within reach. Evan is awesome!
@DarkenSeyreth
2 жыл бұрын
Great episode! I hope KZitem is still around and I will get a notification for this channel 25 years from now of a video called "I forgot I hid this under the King Plank" and the mystery will be revealed!
@AcornToArabella
2 жыл бұрын
😁😁😁
@BigRedNZ1
2 жыл бұрын
Sunny spring morning with my coffee and Arabella… thank you
@TrzCharlie
2 жыл бұрын
I have been watching you all for so long now I feel as if I know you personally. This project has become my Saturday morning have my coffee and relax video. Thank you for taking us with you.
@AcornToArabella
2 жыл бұрын
And thanks for coming along! That’s very kind, we’re glad to have you here.
@TheArtofBoatBuilding
2 жыл бұрын
In 25 years, speaking from my experience, you'll be surprised! Steve you have become a master bronze welder. Fantastic design. Bob
@Gorbyrev
2 жыл бұрын
That black locust kingplank is a masterpiece!
@badcat4707
2 жыл бұрын
Good morning Akiva and Crew 😸😺 The Sail Cargo Crew still loves Acorn to Arabella as they showed an A2A sticker in their latest video yesterday (18:14) from when Steve and Alix went there to bring them a huge load of tools and equipment a couple of years back . 👍👍👍😸😸😸
@lucky3662
2 жыл бұрын
Yeah this was a nice detail! Love the progress they make :)
@mathijs58
2 жыл бұрын
That was nice to see, I almost missed it! here's the proper link to the relevant time point in the SailCargo video: kzitem.info/news/bejne/1LCN2nhjjaSVg6Q
@markschuman3615
2 жыл бұрын
Wow that happened so quick I went back to yesterday's Sailing Cargo video Good eyes 👀 your post doesn't take you there only to A2A time stamp for today's video That's a Cool catch though 😎 👍
@badcat4707
2 жыл бұрын
The Brass work done by the fellow Evan looks amazing !! and it'll all look stunning when it's finally polished up and installed - Wow !!
@oleran4569
2 жыл бұрын
Yes. That was an elegant solution!
@dennisbackstrom2244
2 жыл бұрын
KP is a stellar person and simply a Bad Ass. I’m super impressed with her skill Level. Steve is fortunate to Have her on the Team. 👍
@Trebuchet48
2 жыл бұрын
I do love Fridays! And today, entirely by chance, I'm wearing my bilge dragon shirt! Edit: As an engineer who spent a couple of decades designing steel weldments for marine environments, I'd be inclined to add a light weld bead around the top of that joint on the brackets to keep water out. I know it's bronze, but still.
@AcornToArabella
2 жыл бұрын
Huzzah! Thanks for your support!
@mktrollop1093
2 жыл бұрын
I agree, but it would look shite, maybe he could just braze it along the top to fill it?
@robertgoodwin9426
2 жыл бұрын
I've had the privilege of woodworking with quality hand tools in the past and miss it terribly. As I approach my 80th birthday it's clear that I won't be doing that again. Thanks to your videos, I get to enjoy that past pleasure once again.
@AcornToArabella
2 жыл бұрын
Thanks for watching, Robert!
@budschermerhorn6062
2 жыл бұрын
Good Morning from Sandwich, MA
@AcornToArabella
2 жыл бұрын
Happy Friday, Bud!
@rohanbullock6532
2 жыл бұрын
Friday evening on the east coast of Australia! Gday everyone!
@AcornToArabella
2 жыл бұрын
G’day and happy Friday!
@claudehopper9813
2 жыл бұрын
That shows real determination to put on a full welding suit and start welding on a 90 degree day . Steve you got what it takes keep up the good work the boat is a masterpiece of American know how .
@eb282
2 жыл бұрын
I really enjoyed the music and pacing to the edit on this one. Well done 👍
@kevinhoober1863
2 жыл бұрын
Hearing the saw turn on at 12:29 while Steve had it upside down made me jump! My heart rate calmed back down once the video switched to Steve cutting the board (not his fingers)
@camielkotte
2 жыл бұрын
KP, I love your attitude towards the future. Very decisive he'll be happy when, in 25 years, he needs to work on the king plank. 🤗
@AcornToArabella
2 жыл бұрын
😁
@thomasarussellsr
2 жыл бұрын
Wow, that is a lot of "toothpaste" squeeze out on those king planks. 😆😆😉 And yet another pair of signatures. If you get in the right position inside, those may be visable from inside the finished boat. I hope the "open me" suprise has a nice note rolled up inside it, for a good memory and laugh, with a link to this video.
@erictakakjian6021
2 жыл бұрын
Love the bronze brackets!!
@ryan_mcme
2 жыл бұрын
Good morning and happy Friday from midcoast Maine! ☕
@AcornToArabella
2 жыл бұрын
Happy Friday from great spruce head island in Penobscot Bay, where I’m anchored! 😁 -Anne
@sveinungchr
2 жыл бұрын
Happy new episode day. Best day of the week every week.. greetings from Norway..
@AcornToArabella
2 жыл бұрын
Happy Friday to you!
@philparmenter53
2 жыл бұрын
Happy Friday from Plymouth UK
@AcornToArabella
2 жыл бұрын
Happy happy Friday, Phil!
@clarencehopkins7832
2 жыл бұрын
Excellent stuff bro
@mcc19606
2 жыл бұрын
Congratulations on the King Plank!
@carmamd
2 жыл бұрын
I’ve been watching this channel for years now, and enjoying every minute! It is wonderful almost beyond words to see the full shape of it coming together plus the planks and the decking going on. I’ve done enough woodworking myself, and shop work, (my father made guitars, among other things) that I recognize good craftsmanship and yours is superb!👍💕🙏
@AcornToArabella
2 жыл бұрын
Thank you so much for being on the journey with us, Curtis!
@hughcallery7540
2 жыл бұрын
Really enjoyed the bonus video. Brought back a lot of memories. This project never ceases to amaze. It blows my mind that each individual piece of wood (of which there are thousands) is custom-fitted. What an amazing feat of dedication, perseverance and skills. Profound thanks to you and your crew.
@thibaultghesquiere
2 жыл бұрын
So satisfying to see the king plank in and fastened Also I keep getting blown away by how strong this bow assembly will be in the end. I mean there are so many interlocking pieces there, holy cow!
@pjtfurniture
2 жыл бұрын
Did anyone else notice the middle screw being pushed out by the silicone as Steve drives the other screws in at 24:35? Made me smile!
@AcornToArabella
2 жыл бұрын
Goop’s gonna goop! Hahahh And also, for anyone reading this someday-don’t use silicone on boats. It ain’t great. Not sandable, paintable, and harder to repair/replace. -Anne
@nostromo526
2 жыл бұрын
@@AcornToArabella I would say never use silicone anywhere, anytime for the same reasons (except maybe a fish tank).
@Ayns.L14A
2 жыл бұрын
Happy Friday Guys. Glad to see Steve taking a lil bit of time off, Hey everyone Don't forget to Like and subscribe !!!
@AcornToArabella
2 жыл бұрын
Thanks so much and happy Friday, Aynsley!
@samuelfox3997
2 жыл бұрын
Very enjoyable
@AcornToArabella
2 жыл бұрын
Cheers!
@direbearcoat7551
2 жыл бұрын
I started watching from when the lead keel was poured. Then I went back and watched from when the trees were cut and the saw milling was going on. Then I caught up and had been watching since. I am amazed at how many details are still left to complete. The boat is much more complex then I imagined, even to the point that there are parts that will be hidden behind other parts, which are hidden from view as well. I mean, wow! And I didn't see any of those parts in the plans when you guys started with the floor plans and whatnot. It's like you had to make up the rest as you went along. Amazing work, Team Acorn To Arabella!!
@AcornToArabella
2 жыл бұрын
Thanks so much for being on the journey with us!
@johngullotti
2 жыл бұрын
Hi Steve I really like the tabbed details of the brackets. But you might want to check with an engineer regarding the strength of those welds. Although you put quite a bit of weld metal into those rectangular "plugs" the strength of those joints is equal to the shear area (depth of the "plug" times the perimeter of the tenon multiplied by the shear strength of the annealed metal which might be somewhere about 7,000 psi. I'm guessing that the weld depth of the large plugs was about 1/8 inch and the tab was maybe 1/2 inch by 2 inches. That means about 5/8 square inch. Do the math and you get about a two ton breaking strength. Are you certain that's enough? A small fillet weld tig welded on the exposed side will likely double the strength and get rid of the exposed crevice which will disguise any deficiency of those joints. You won't see any problem until the failure occurs. Just my $.02. But I did build submarines. See you when you get to Mystic. I live up the street from where Bob stored his boat.
@AcornToArabella
2 жыл бұрын
Two tons? Every few feet from one another? Yes. That’ll be great. Thanks for the info!
@prereed
2 жыл бұрын
A very quick 26 minutes. Well done Ben.
@DubsDarbo
2 жыл бұрын
I liked the visitors from Wisconsin.
@joelhaynie5056
2 жыл бұрын
Everyone knows someone from Wisconsin!
@abrahamtov364
2 жыл бұрын
Sometimes I wonder what happened to Alex, and how is he doing. Love the bronze or brass for the kick plate very well made. I also wonder where my name went on Arabella, someone had to sign for me. Starting to plank the deck is awesome.
@usmcforever7630
2 жыл бұрын
Not the same since Alex left. Just different somehow
@f12mnb
2 жыл бұрын
I hope when the ship is finally launched that Alex can be there - that would put a great touch to the series.
@alexnelson8
2 жыл бұрын
I used to feel the same, but not anymore.
@sourignooutsama7098
2 жыл бұрын
Don't forget to chamfer the holes for your lashing on the toe rail brackets. Maybe even chamfer the exposed edges of the entire bracket. Lots of sharp edges there. They look like good toe slicers.
@AcornToArabella
2 жыл бұрын
Yup, lots more finish work to do there.
@steampunkskunk3638
2 жыл бұрын
Interesting to see there are so many ways to build a boat. Leo did his deck planks, then covering boards, then king planks. Here you did covering boards, king planks, then I'm guessing deck planks last.
@AcornToArabella
2 жыл бұрын
There ARE many approaches to building boats. Variations can be due to material availability, crew size, budget, preference… all kinds of reasons.
@lucvandecasteele7696
2 жыл бұрын
cute easter egg, loving the eye for detail and nicely fitting woodworking. glad my margens of my woodwork projects have a lot more tolerence. keep up the good work, hope to see is sail in person one day.
@bin_chicken80
2 жыл бұрын
Nice work everyone :) Great progress. Thanks!
@forthwithtx5852
2 жыл бұрын
That green welder arc and spatter footage was cool.
@davidc6510
2 жыл бұрын
Great episode and super excited about the installation of the king planks. Thanks for sharing!
@anthonymiller8989
2 жыл бұрын
Tony & Susan here, The custom brackets for the toe are fantastic. I cannot imagine a finer outcome. The fit and finish on the final product just perfect.
@AcornToArabella
2 жыл бұрын
Hooray, Tony and Susan! Thank you!
@dennisdownes9319
2 жыл бұрын
As a fellow New Englander......."You can take the person out of Maine.....but not for long!" Good Luck Sam! DD
@yota4004
2 жыл бұрын
that water jet work is exquisite.
@AcornToArabella
2 жыл бұрын
Even is the best!
@unclespongehead
2 жыл бұрын
The closing credit for Steve each week is different, and hilarious. This week, "Not Kidding Around", as Steve drives a dozen brass screws with a brace and bit.
@AcornToArabella
2 жыл бұрын
😁
@josephkoziol5421
2 жыл бұрын
Well-designed, beautiful, and purposeful brass work from MS Fabrication. These are the types of accessories that pull it all together. Riveting them into place is so apropos.
@AcornToArabella
2 жыл бұрын
Huzzah for Evan!
@tjtobin86
2 жыл бұрын
Good solid woodworking content right there! Very enjoyable to watch!
@jonasmichaelmoir9378
2 жыл бұрын
Evan rocks!) Modern legend!)
@AcornToArabella
2 жыл бұрын
We’re so thankful to know him and support him!
@jimclester4754
2 жыл бұрын
Well I have watched another Friday episode. The boat is really starting to come together. watching you guys do this work has been the closest thing I have ever done to understand everything it takes to build such a boat. See you next week a follower from Northeast Arkansas.
@AcornToArabella
2 жыл бұрын
Thanks for watching, Jim! We’re glad you’re here!
@Mojica50
2 жыл бұрын
I've heard multiple names for the brass fitting method. Tab and keyway or broached hole and key. Really depends on the method of creating the hole. A reamer is used for finishing a round hole and a broach is used for a square hole in metal working. With the tolerance level of plasma or water tables, it probably wasn't finished out with a broach. Cool stuff either way. I agree about sealing that top seam though for moisture.
@scottsorby7966
2 жыл бұрын
Well young Stephen I wish you all the health in the world to be the one who opens your wee time capsule/ easter egg, I probably won't be here by that point but I can only imagine the adventures that Arabella has been on by then. All the very best Scott
@AcornToArabella
2 жыл бұрын
Thanks for being on the journey with us, Scott!
@amicidavinci
2 жыл бұрын
You should maybe do a pull test on one of those stanchions. Sometimes a tab-in-hole weld from the back side is not as strong as one might think... plus water can get in and sit in the joint on top.
@AcornToArabella
2 жыл бұрын
Someone did a calculation for us. With the thickness and angles known, it’s assumed that the strength is at least a couple thousand pounds. We don’t have a machine to measure or apply that force, and so here we’ve simply overbuilt them for their purpose as we have many things on Arabella.
@amicidavinci
2 жыл бұрын
@@AcornToArabella P.S., fantastic stuff, can't wait to see you launching!!
@AcornToArabella
2 жыл бұрын
Cheers!
@groundspeed3954
2 жыл бұрын
It may be the powers of crowds . . . or Steve MIGHT be a Vulcan master of three dimensional chess. I'm constantly amazed at his planning and foresight. Passion, baby, passion.
@haroldmclean3755
2 жыл бұрын
Solid as a Rock 👍 Nice one
@mattevans-koch9353
2 жыл бұрын
Thank you so much for another relaxing and calming video of boat building. Excellent everyone. Have a great weekend.
@AcornToArabella
2 жыл бұрын
Cheers, Matt!
@ThoughtfulWander
2 жыл бұрын
Great episode! Brass work looks pretty sweet! Stay safe and keep rolling Arabella team!! 👍👍👊👊
@AcornToArabella
2 жыл бұрын
🙌🙌🙌
@ThoughtfulWander
2 жыл бұрын
@@AcornToArabella 👍👍
@JK-zx3go
2 жыл бұрын
I wish I had that level of confidence with a rip saw :)
@terrygleeson8480
2 жыл бұрын
So happy to see that brace taking priority over the Yankee screwdriver.😎
@AcornToArabella
2 жыл бұрын
They’re both exquisite to use!
@davidmessersmith786
2 жыл бұрын
I’ve always felt that your series is a good example of the old adage that you can NEVER have too many clamps!
@AcornToArabella
2 жыл бұрын
Hahaha TRUTH!
@thomasbuzzi3234
2 жыл бұрын
That bronze toerail machining must have cost a fortune. It is beautiful!
@AcornToArabella
2 жыл бұрын
Evan at MS Fabrication charges a fair rate for quick and precise work, and yeah it’s very beautiful! Tune in tomorrow for more on these as the welds and everything else get a good scrubbing and sanding.
@georgefrench1907
2 жыл бұрын
That king plank really caps the structure. 👍
@AcornToArabella
2 жыл бұрын
It’s a crucial component!
@Bruin4Life
2 жыл бұрын
I have been enjoying watching since the beginning and am amazed at the number of hours it is taking to build this boat. Makes one wonder how the old Vikings, English, Spanish, Portuguese, Dutch Navies, etc. built so many ships to sail the seas and fight wars way back in the 16th, 17th, 18th, and 19th centuries.
@AcornToArabella
2 жыл бұрын
Much larger crews and a lack of workers rights. 😉
@charlesmoore456
2 жыл бұрын
Happy #a2acoffeeclub day! Another "time flies when you're having fun" episode with so many interesting new things. Amazing!
@AcornToArabella
2 жыл бұрын
Cheers, Charles! Happy Friday!
@custa73burner
2 жыл бұрын
Bronze brackets...what an imaginative design, and beautifully constructed. Respect from an old school engineer.
@AcornToArabella
2 жыл бұрын
Cheers, Collin!
@passinthru4328
2 жыл бұрын
i don’t get tired of watching the precision hand tool work, for one.
@AcornToArabella
2 жыл бұрын
Thanks for saying so! Tune in tomorrow, we’ve got a bit more of that for sure.
@Dronston
2 жыл бұрын
Not only is it so cool to see a wooden boat come into existence, it's also the feeling of it being build with very high quality. I often have the notion while watching these videos that the next owner hauling this boat over will constantly speak out loud "man this boat was build well! This guy really knew what he was doing!" Of course I know nothing about boat building myself 🙂
@AcornToArabella
2 жыл бұрын
Thanks for the kind words!
@bobqzzi
2 жыл бұрын
Another awesome video. Those bronze brackets are very cool. I would, however, be worried that water would seep into the slots and never have a chance to dry thus accelerating corrosion. May be worth welding around the perimeter just to seal them
@AcornToArabella
2 жыл бұрын
Corrosion, or in the case of bronze patina, is actually very protective to the metal. We don’t intend to shine everything, but rather let them have their patina.
@neilschristensen9143
2 жыл бұрын
Been watching since the pouring of the lead ballast.
@SuperJ24
2 жыл бұрын
Fantastic, relaxing, and in all other ways enjoyable to watch…again.
@AcornToArabella
2 жыл бұрын
Hooray! Hope all’s well, Jeffrey!
@rppvt
2 жыл бұрын
love those little ASMR woodworking tags after credits, Ben. Thanks
@AcornToArabella
2 жыл бұрын
😁
@jamesboardman609
2 жыл бұрын
As always Steve and KP, great work!✔️ One Of theses days, I plan to make a trip to visit.
@AcornToArabella
2 жыл бұрын
When you do, here’s the info you need. www.acorntoarabella.com/visitor-welcome
@jcurtis4082
2 жыл бұрын
Tab and slot, along with scalable precision cutting systems, has changed them fabrication processes of many industries. It is a natural progression from various CAD platforms. The technology is now available to smaller manufacturers, industrial, commercial, agricultural and marine builders, as well as hobbyists. Those brackets are so cool. Just right for the project. To me it's industrial art deco. (; I am also enjoying the progression of your presentation styles. This one has a nice, unexplained, interlude just past halfway that was nice. Just the visual of work being done. That was well placed, nice editing. Progress continues...keep pushing. You're getting closer to the completion of an epic handmade work of working marine art.
@AcornToArabella
2 жыл бұрын
Thanks for this thoughtful note, Jeff!
@Inthewildjayandlynn
2 жыл бұрын
mycket bra worksman/womenship..your team is amazing. Kaylin P. - special thumbs up; for your inspiring works.... greetz from sweden. #inthewild
@AcornToArabella
2 жыл бұрын
Tack!
@belledetector
2 жыл бұрын
What a beautiful design you came up with for the toe-rail brackets. You went for the oval design as I suggested in ep 221 :-) I really like how the oval baseplate and mounting plates turned out. It fits the time period but with a modern construction. Just awesome. The Covering boards and King plank are looking really good as well. It´s going to be a truly beautiful and most importantly a very seaworthy boat. Cheers/ Jacob
@AcornToArabella
2 жыл бұрын
🙌🏼happy Friday, Jacob!
@geoffhalstead1811
2 жыл бұрын
13.00 No better way to saw/cut👍👏 I have all of my metalworking hacksaw’s blades set to cut pulling towards me, and no more skew cuts now, phew‼️😅 24.27 Those chest braces really make those screwing jobs so easy👍👏 I have my Father’s one that he used early 50s and no idea how old it is, whether new or second hand.
@markschuman3615
2 жыл бұрын
Good Morning y'all
@AcornToArabella
2 жыл бұрын
Happy Friday, Mark!
@shadetreemechanicracing22
2 жыл бұрын
I love the green glow when welding bronze.
@AcornToArabella
2 жыл бұрын
It is soooo cool. TRULY! -Anne
@richardsiddon610
2 жыл бұрын
A joy as always guys. Thankyou.
@AcornToArabella
2 жыл бұрын
Thank you!
@kathywrightjohnson6804
2 жыл бұрын
Well things are moving along nicely. Akiva looked a little bored there but still keeping an eye on things. I'm sure when it's in the 90's he is happier in the air-conditioning. Lots of new faces! We are planning on taking you kayaking tomorrow and I can't wait. Have a great and safe week!
@idontthinkso666
2 жыл бұрын
Its so sad every time they show that poor neglected dog. Left alone in her little prison. Why have a dog when you spend zero time with him/her?
@kathywrightjohnson6804
2 жыл бұрын
Well the title is Acorn to Arabella. It's a story about the building of a wooden boat. Not the Akiva show. The goal is to see all the details that go into building a boat from the tree felling to the milling to the building. Akiva gets all the attention he needs. He also happens to be a runner. He is not out in the pen 24/7. He is their mascot and buddy. They put snippets of Akiva in to show he is still keeping an eye on the build. Please don't assume he is mistreated or ignored. These guys are busy building a boat. Playtime comes after work.
@AcornToArabella
2 жыл бұрын
Akiva’s pen keeps him safe. Siberian Laikas aren’t lap dogs. He’s bred to be up to a half mile away from Steve as he’s hunting, and will bolt through the neighborhood, subject to the violence of an errant “coyote sighting” or the front end of a car. He can dig as he pleases, has shade and rodents to chase, and can survey the neighborhood from his perch. We’ll have him back in the shop soon-we’re rearranging back to the setup where he’ll have a safe, fenced area again. Thanks for your care and concern! He is very loved.
@dmj1170
2 жыл бұрын
One tip I would love to share with you all. This is coming from someone who worked as a lead mechanic on a 757 heavy check and I managed a group of sheet-metal mechanics. We used 1/8 thick plexiglass panels to trace out shapes. That product, although petroleum based, is probably more expensive then cardboard but a heck of lot easier when tracing out contours or shapes.
@AcornToArabella
2 жыл бұрын
I bet your tolerances for sheet metal, and the cost of it, definitely warrant expensive and more accurate templating material! Thanks for sharing this tip!
@markusschellenberg4684
2 жыл бұрын
A joyful moment to finish my week! Great editing.
@AcornToArabella
2 жыл бұрын
Thank you, Markus!
@troubledspirit3328
2 жыл бұрын
Looking awesome Team. Another fabulous episode. Thank you for the wonderful entertainment...
@AcornToArabella
2 жыл бұрын
Thanks!
@burgle66
2 жыл бұрын
Are you planning to knock down the edges on those bronze brackets? Those look like they'd be savage on your toes if you ever needed to brace underway. Awesome video as always, thanks for making my Friday morning 🙂
@AcornToArabella
2 жыл бұрын
There’s more work to do on them, yes.
@Tomhohenadel
2 жыл бұрын
Happy Friday. Looks like someone put too much vanilla icing under the king plank when Steve was screwing it down. Another amazing Friday. Thanks gang, keep up the good work
@AcornToArabella
2 жыл бұрын
DELICIOUS BOAT ICING!
@AcornToArabella
2 жыл бұрын
Happy Friday! 🎉
@MrMichaelcurran
2 жыл бұрын
Sorry to hear Steve is heading north for the Summer. But Spring will be here soon. I thought for a moment ya hired a new crew with camera's and then realized they were quest. I'm watching your vid at 0530 West Coat Time. I gotta stop doing that! All the best in preping for deck laying.
@gwpcs
2 жыл бұрын
10:20 whoever the singer was, you have a beautiful voice.
@dennisnelson6781
2 жыл бұрын
Love the Easter Egg! I’ve done that with home improvement projects.
@AcornToArabella
2 жыл бұрын
Nice!
@paulheitkemper1559
2 жыл бұрын
Happy Friday, A2A crew! That slo mo weld spatter was a pretty cool shot. Good job, Ben.
@AcornToArabella
2 жыл бұрын
Happy Friday, Paul!
@donr416
2 жыл бұрын
Wow! At this point you really need to be a Jack Of all trades.
@AcornToArabella
2 жыл бұрын
Every boatbuilder is. In bigger yards there’s a tad of specialization, but otherwise… gotta have a lot of talents!
@rodneywroten2994
2 жыл бұрын
taking shape
@AcornToArabella
2 жыл бұрын
🙌
@dickdegraaff5452
2 жыл бұрын
Dear. Anne and Steve, Happy Friday first of all. As always we love to see the kind of craftsmanship involved by building Arabella in special for the way of dealing with every detail and with a lot of love for wood. It’s also very nice to how Arabella slowly and step by step is being completed. We wish you together with your team lots of success with the build of this beautiful boat and wish you as well as your both complete families all the happiness of the world plus we send you ❤️ from the Netherlands. Best regards, Willeke and Dick de Graaff
@AcornToArabella
2 жыл бұрын
Thank you, Willeke and Dick! Happy Friday!
@David-uy6ch
Жыл бұрын
Awesome
@lookronjon
2 жыл бұрын
Good show. I was ready at the end to see Steve get that 42 million on his shorts and legs and hands and tools and shoes and arms.
@AcornToArabella
2 жыл бұрын
😁
@nicolasc7222
2 жыл бұрын
It took me two weeks but I have finally caught up. it has been an amazing progress till now. You al did amazing work. If al goes to plan I will be there for the launch next year all the way from the Netherlands. Are there any other people from Europe planning to go to the launch?
@AcornToArabella
2 жыл бұрын
We’re pretty sure there are! We hope to see you there! Thanks so much for watching!
@peehandshihtzu
2 жыл бұрын
My soul can never rest now not knowing what was in the "open me" package, LOL. Actually not joking. :)
@AcornToArabella
2 жыл бұрын
Stay tuned… FOR TWENTY YEARS! 😉 thanks for watching!
@peehandshihtzu
2 жыл бұрын
@@AcornToArabella You know I will, LOL. ;)
@mikebarron5805
2 жыл бұрын
Wow! Great job, great video,. Just a random thought that passed thru my mind as I watched you screw the King Plank in place. "That would be a very tough nut to crack." 🙋♂️
@AcornToArabella
2 жыл бұрын
T’would!
@tomcarlton854
2 жыл бұрын
Thank you.....👍👍👍
@AcornToArabella
2 жыл бұрын
Thank YOU!
@Johnny-Too-Bad
2 жыл бұрын
I'll got with Bull-Toe for the name on what you've got on for the rail.
Пікірлер: 361