I have a V1 Mystic 29. I've only kept the original rudder, strut, & stuffing box. Everything else has been changed. Upgraded ESC, steering servo, flex cable, prop, radio system & carbon fiber inlay. Running a 2000kv Leopard 4074 on 6s, the boat runs a GPS verified speed of 75mph. Much faster & it wouldn't stay on the water. Running over your own wake becomes pretty treacherous as well. Have fun & looking forward to your progress.
@stephenwintz4648
Жыл бұрын
Sweet! Can’t wait to see what you come up with!
@rjlinnovations1516
Жыл бұрын
Awesome 👍. Too fast !!! It’s fun to watch
@rjlinnovations1516
Жыл бұрын
🙏
@boatwerks
Жыл бұрын
Big b maybe twin rudders would be cool on this project
@IRONCLADRC
Жыл бұрын
That would be cool, one of my first boat builds had twin rudders, amazing how much speed two rudders scrub off a boat. Switched to single rudder instantly gained 8-10mph.
@mariebaxter473
Жыл бұрын
I did see a similar conversion , with the rudder still on the CL . Worked very well.
@hoodatdare7039
Жыл бұрын
The mad flow has no u joint. It has a rubber tube over the flex cable.
@IRONCLADRC
Жыл бұрын
I thought about going flex cable and using the stock struter, I could probably get it to work out..
@Mel-127
Жыл бұрын
Wouldn't it be easier to purchase n fit the Blackjack strut/rudder assembly. Then save that bigger assembly for a bigger project. Just a thought. What ever ditching that strudder rubbish has got to be a winner. Saying that I have the Graupner strudder on my test boat n so far it's survived 6s. 😂🤣
@norcalrc
Жыл бұрын
I love this channel. 1500 kv motor … so let’s go 6s
@IRONCLADRC
Жыл бұрын
Thanks, I've been watching your green screen shorts lol. I was laughing my azz off. Keep up the good work. 👍
@norcalrc
Жыл бұрын
@@IRONCLADRC thanks buddy
@norcalrc
Жыл бұрын
@@IRONCLADRC dude glad you enjoyed them, some people (like my kids) don’t think they are funny. The joys of being a dad. Hey when are you gonna do a unboxing for the motorcycle? Just kidding
@Pholiage
Жыл бұрын
I dont understand why Horizon hobby and proboat keep discontinuing models. They don't even replace the models with another. The Geico graphic i can understand for licensing but why not offer a plain one?
@Dr_Jet
Жыл бұрын
I'm actually considering a strudder setup on my next project. It will be a micro and I'll be running that TP2040 motor with a 2.2mm cable. I'm thinking I will have a free-floating section of Teflon liner going from the stuffing tube to the nose cone of the strudder with the cable inside where the U-joint would be. The cable/liner would serve as the flex joint and I'd trim the stuffing tube a bit further from the transom than typical. That probably wouldn't work with high-power systems, but I could probably get away with it in 100~150 Watt applications.
@IRONCLADRC
Жыл бұрын
Do you want this unit I'll send it to you
@Dr_Jet
Жыл бұрын
@@IRONCLADRC No, I'm going to do something.......... different....
@IRONCLADRC
Жыл бұрын
Roger that, Figured I'd ask. Isn't this the same strut/rudder you used on your farm tractor recovery boat?
@Dr_Jet
Жыл бұрын
@@IRONCLADRC That boat used the earlier Graupner-made version, but it is essentially the same thing. It runs a geared Speed 400 motor (75 Watts) so the loads and rpm on the U-joint are minimal. My "New" plan will something with a bit more speed than the "farm implement" you have seen before.... 😉
@vadimkvak1751
Жыл бұрын
Hi Bro! Check parts for Traxxas Blast. For my old BJ24 I do exactly as you say - put a strut on it and a rudder. And after a few months I did this I have found that Blast parts kinda work here. Now that old "struder" works on a different boat. Not that nasty look, but works for very cheap (in Poland u-joint, shaft, bearings and prop from blast costs me like $10 in total)
@IRONCLADRC
Жыл бұрын
Thanks for the info good to know 👍
@Wanted1069
Жыл бұрын
Same reason I sold my MG24. That strudder is unobtainum..
@rafaeljesusperezgonzalez2188
Жыл бұрын
Deslizamiento parejo, gran velocidad y buena estabilidad caracterizan los productos de IRONCLAD.
@garrettkifer8332
Жыл бұрын
DYNM3835 is the part number, not the size.
@rahmatciboy9368
Жыл бұрын
hello, I'm from Indonesia and I have a 1500mAh 4s 100c battery, so the 100c one can damage the esc and the motor or not, because I use a 30A esc
@IRONCLADRC
Жыл бұрын
30a should take it. Just keep an eye on temps, especially on your first run.
@fpvMazerolle2607
Жыл бұрын
i wanted this boat so bad but was never financially able now that i am its a damn unicorn 😢
@PatriotBrad
Жыл бұрын
6s on these and 2000kv us kinda nutty! I got a v1 ms g and bj29. Fun old boats. The inline rudders make them turn on a dime with like 50% turning.
@IRONCLADRC
Жыл бұрын
I've run my little blackjack 24 on 6s, it's insane
@jchevybusa
Жыл бұрын
Where is nc are you
@IRONCLADRC
Жыл бұрын
Jacksonville nc
@jchevybusa
Жыл бұрын
@IRONCLADRC cool am in greenville nc . I got a tlf genesis fiberglass cat and thinking about getting a blackjack 42 hull and transferring everything from the genesis to the blackjack hull.
@jchevybusa
Жыл бұрын
You have any blackjack 42 parts you want to get rig of or sell
@never-stock-rc2968
Жыл бұрын
Dang bro I'm noticing there is zero parts for the MG 36.... super pissed!! No struts no nothing and not sure if you remember my post that I had a blow over and the hull cracked a little.... all the cash I've spent I could have bought the oxidean marine animal!!!! So if anyone want a miss gieco 36 with only 8 runs on it lmk I'll ship. Shoot me an offer or I'll hang it from the rafters in my man cave hahah
@IRONCLADRC
Жыл бұрын
Where is the crack located on the hull?
@jermaineallen7450
Жыл бұрын
Still have it
@jermaineallen7450
Жыл бұрын
I have a proboat MG 29 fiberglass hull.
@never-stock-rc2968
Жыл бұрын
@IRONCLADRC it's down on inside of sponsons but no leakage
@never-stock-rc2968
Жыл бұрын
@@jermaineallen7450 I do
@georgem.6136
Жыл бұрын
Strudder = garbage design ! Now it will Rip once modifications are complete!
@IRONCLADRC
Жыл бұрын
She's gonna be zippy with the new drive line
@kylepietrowski530
Жыл бұрын
Hey B i got some questions for ya regarding my bj24 is there a way we can chat not on comment section ha
@IRONCLADRC
Жыл бұрын
Email is in the description very bottom
@kylepietrowski530
Жыл бұрын
@IRONCLADRC i dont see it at last time i did and tried to email you it said email cant be found?
Пікірлер: 47