Finally a real mechanic explaining this procedure! Thanks very much. I replaced all the bushings and didn’t know how to set the creeping issue properly thank you very much.
@andrewrobinson2869
8 ай бұрын
I don’t own a bobcat yet but one day , I have used a few, such an easy fix , thank you for sharing, if only more people where like yourself , take care,
@scottyb4606
2 жыл бұрын
Great video. Mine is just beginning to creep sometimes. It has about 3200 hours on it. At that age do you think I can just flip the stops or should I buy stops and bushings ( solid round parts) before I go in... Want to just go in once. Also would like to see you get the factory safety device. I had only one with my machine so I welded 2 pieces of 1.5 angle metal into a C channel for the other side. Thanks for explaining and showing this. Appreciate any input.
@radicalrepairs3888
8 ай бұрын
you can usually just flip them and make it work
@jamesstires404
Жыл бұрын
Put some light on what your doing can’t see anything your wrenching on
@chillawhite4558
11 ай бұрын
Totally agree, Most of the time it was that dark or his elbow was in the road. Would have been a good video if I could see what he was doing.
@todormarangozov1524
5 ай бұрын
So you put both on Neutral and tight the bolts on each side? I just can't see the actual adjustment, sorry ! Can you explain with few words because I have to do the same thing.
@radicalrepairs3888
5 ай бұрын
Yes you got it
@wallacesullivan6227
2 жыл бұрын
Need to have somebody hold the camera and put a light in there cuz your video don't work so good you can't see it
@radicalrepairs3888
2 жыл бұрын
I'm working on better quality videos , bought better camera 2
@johnbaudino2535
2 жыл бұрын
Good job brother thanks God bless
@rss608
Жыл бұрын
yes, great video and butt!!!! I'd forgotten how to adjust the creep... felt like I was looking at myself... butt and all... thanks for taking the time to do this. Question, what about running the bar on a belt sander to flatten it out? I believe mine are worn on both sides now too...
@radicalrepairs3888
Жыл бұрын
thanks for the reply , im building a shifter kart next
@radicalrepairs3888
8 ай бұрын
Sorry about the but view
@melchristian8876
Жыл бұрын
👍👍👍👍
@chillawhite4558
7 ай бұрын
I think it was good but I couldn't see what he was doing, needed a good led light.
@sandyjoseph9880
Жыл бұрын
Raise and block the loader arms 10 times the access to the centralizer
@efrasautorepair
4 ай бұрын
Thank you for the video, sir. It’s a great help.
@radicalrepairs3888
4 ай бұрын
I'm happy it's helping people
@peteronthefarm8430
2 жыл бұрын
How do you start the engine while the cockpit is opened up? I did reach the key and tried starting it up, but it doesn't start. The starter really tries but doesn't kick in. However after closing the cockpit it starts just fine. Currently waiting for parts, all bushings blown in steering linkage, but It's gonna be a lot of trial and error to set the neutral position without being able to run the engine cockpit opened.
@radicalrepairs3888
2 жыл бұрын
they usually start ,just reached up turned key its easier to adjust with control sticks in
@doncookbc
10 ай бұрын
best video yet !! thanks
@peteronthefarm8430
2 жыл бұрын
I will try to do this on and old 763 tomorrow. It doesn’t creep but the left stick is so loose its not centering itself. While i am there i will flip the blocks and rotate the cams to make it tight!
Пікірлер: 25