Getting ready to do this to my Tundra. Great video dude. Very well explained and good shots of where to mark and cut. One of the better videos that address this. Thanks for making this. Subscribed.
@kirkleaman6863
2 жыл бұрын
Nice job!
@walterplasencia7606
4 жыл бұрын
Best bmc video on KZitem great work
@xlazyjaysx
2 жыл бұрын
Nice work bro man wish you in Seattle can help me weld mine 🤭
@geraldpulliam5209
6 ай бұрын
Borrow a mig welder from a buddy..Anyone can Mig
@Duane14
3 жыл бұрын
I just can't believe the owner put that God awful bug deflector on that gorgeous truck!
@michaeltamnguyen690
4 жыл бұрын
Great job and very detail oriented. Thanks so much
@WolfOverland
3 жыл бұрын
BEST ONE ON UTUBE. WISH ME LUCK TOMORROW
@okibrian
Жыл бұрын
Do you need to disconnect the battery negative terminal when welding the steel plate for the BMC or can you just keep the welder clamp near by the weld point without worrying about damaging anything?
@minh82683
Жыл бұрын
Disconnecting the battery is recommended but I've done plenty without disconnecting the battery with no issues.
@okibrian
Жыл бұрын
@@minh82683 Thank you!
@M8017.
3 жыл бұрын
Good job dude! I have a 2019 1794 edition. I'm installing a 6 inch Readylift with Bilstein Coilovers, 20x12 wheels and running 35's. Do you think I'll need to do this delete? Did this truck have a lift?
@minh82683
3 жыл бұрын
You're most likely gonna need it done. It really depends on the wheels offset but if you're on 12 wide and 35s it will most likely need it done. This truck was chopped then leveled so it wasn't a big lift. But there's a possibility that the 6" lift will play a role. But only one way to find out lol!
@OfficeLinebacker-FJB
4 жыл бұрын
You do great work.
@jasondauzat1619
4 жыл бұрын
Great job!! 👍
@Pishing805
4 жыл бұрын
Awesome video btw.!
@Pishing805
4 жыл бұрын
Do you disconnect the battery when welding?
@minh82683
4 жыл бұрын
I try to most of the time.
@Justforfun-ek7et
5 жыл бұрын
Just finished the video, so I like what your making and I appreciate the inside look at this process and I am sure you have already thought about this stuff, but from a non subscribed random person on the KZitems, I would have loved to see you video you using the tools and making the cuts and even the welds ( I know there is a lot required when doing so for protection of equipment and video quality regarding this) overall great video, just something to consider.
@minh82683
5 жыл бұрын
I appreciate the comments! I would love to make more details video in the future. As of right now I just don't have the time and right equipment to film in detail. I record and edit with my cell phone.
@Justforfun-ek7et
5 жыл бұрын
@@minh82683 I figured as much and totally understand. your doing great with what you have. keep up that hard work and over time invest in the equipment as you can. I see more good things coming from you in the future. On a side note, I have a tundra and will probably do the BMC/ CMC myself so that is why I am picking on the "in depthness of your video"
@wasimiqbal8060
8 ай бұрын
Great job, man. How can i contact to get this done on my Tundra. Phone number or address, please.
@graphguy
5 жыл бұрын
cutting out the frame... doesn't Toyota say that will void the warranty?
@minh82683
5 жыл бұрын
Probably but the customer wanted ot done regardless.
@v1antbo
4 жыл бұрын
fuck them and their 3 yr warranty
@Justforfun-ek7et
5 жыл бұрын
My 33.5s don't rub. 37s coming next!
@lawmoore8733
5 жыл бұрын
34.1"s don't rub either. I want to jump up to 35s and am wondering if I really need this on a 2018. My alignment is slightly forward I think, which helps.
@rottweilerb3348
4 жыл бұрын
You think 22x12 with 35s will fit if I do this ?
@minh82683
4 жыл бұрын
Depending on offset but you most likely have to cut more.
@federicocriste772
4 жыл бұрын
Hi how much you charge for toyota tundra body mount chop? where you located thanks
@minh82683
4 жыл бұрын
200 located in York Pa 17404
@federicocriste772
4 жыл бұрын
Minh's Garage you know anybody doing that in Los angeles thanks
@hunterpedrick6
5 жыл бұрын
I want this done who can do it I live in Valdosta ga?
@minh82683
5 жыл бұрын
You can prob find a local Facebook group and post up to see if anybody around you would do it. I'm pretty sure any local fab shop would do it.
Пікірлер: 35