Thank you for the reassembly introduction/demonstration. Very helpful and informative!
@DB-vl9ob
Жыл бұрын
My spring broke and i got replacement from Boeker today. Hope the new spring lasts longer. Thanks for video.
@МируМир-в5р
3 жыл бұрын
Many thanks from Russia! Very helpful!
@kctyphoon
2 жыл бұрын
Thanks for this. Bought this knife years ago, spring broke the first day i owned it. Finally got around to ordering a new spring kit for $7.95. This will make the install easy.
@megaronknives3032
2 жыл бұрын
Glad i could help, if it breaks that quickly you can contact the place you order it from, that should be covered by the warranty.
@johnrogers2677
3 жыл бұрын
Great video. Just watched it. Very useful. My knife would only open half way. Couldn't believe how much gunk was in there. Springs open like new again. Thanks
@megaronknives3032
3 жыл бұрын
Glad i could help you out.
@CaptDavesSportfishing
2 жыл бұрын
Such a seemingly stouter build than the Kalishnikov. I just had a Boker Jim Wagner reality based blade, manual, that I put a spring in, kick my ass 3 times till I got it right. I dumped the video into the recycle bin. Maybe another time.
@Chsae314
2 жыл бұрын
Thank you for the helpful video! It made assembly/disassembly 10X easier.
@jorgefernandez6407
2 жыл бұрын
Great video AND, thank you btw. Your video on the recon 1 tanto disassembly helped me to fix a "mystery" rattle which was caused by a loose locking pin. Drove me NUTS until... I saw your video! I subscribed too btw. Thanks again!
@megaronknives3032
2 жыл бұрын
Glad i could help you out :)
@Based_Morty
9 ай бұрын
Thanks. Just got one of these and the safety lever was super loose and wasn't engaging. I was able to tighten it up just by taking off the scale. Works good now.
@cesarebeccaria7641
2 жыл бұрын
Big help. Spring in my Strike Plus broke in less than a year with very little use (mostly just sat on my desk). No help from dealer Blade HQ. Dropped the push button spring into the carpet twice during this process. I wouldn't have noticed until too late were it not for this comprehensive video. Package of two springs from BladeOps for $8. Good price, except I'll probably lose the spare before I need it! Thanks.
@doktorb3at
3 жыл бұрын
Thanks for the video. It helped me tighten the safety.
@Elmax17.5dps
Жыл бұрын
Thanks for the information bro!
@edwardk6764
4 жыл бұрын
Needs synthetic oil on friction washer contact areas and grease on spring contact areas. Then you can tighten further and maybe reduce play. Also, I heard reinforcing or replacing the trigger spring can help with tighter action. Other than that, good disassembly reassembly video.
@megaronknives3032
4 жыл бұрын
The button/ trigger spring from Boker is actually quite good, i have seen much worse than that in more expenisve autos. Good tips btw. Thanks man.
@powerplay4real174
3 жыл бұрын
Good budget buy , it reminds me a lot of the Gerber 06 Automatic and Gerber 06 Fast Assisted. Boker make affordable quality.
@devonhutson669
4 жыл бұрын
Thank you !
@bkbigkid
2 жыл бұрын
Thank you, I been wondering how to really clean this knife going on 2 plus years in the pocket. With just being cleaned with water..
@СергейПешков-ц3ш
3 жыл бұрын
Хороший нож. Купил себе такой но через месяц сломалось пружина )). Отдал в ремонт продавцу.. жду уже месяц
@megaronknives3032
3 жыл бұрын
этого не должно происходить. Надеюсь, ты получишь новый.
@DEMTiTzPeePee
2 жыл бұрын
@@megaronknives3032 У меня есть мини-версия бокера, и я не могу собрать его обратно, это так сложно. Какие-либо предложения?
@daveh777
2 ай бұрын
Thanks!👍👍
@angelosedge
3 жыл бұрын
Nice Video
@vanemaster4345
Ай бұрын
Nicey video! Fank yoo.
@sandrosantagata3562
2 жыл бұрын
Hello! Thank You for the nice video. I have a Böker Plus Strike tanto and the opening is very smooth compared to another Böker Strike Plus, and this depends on the hardness of the spring. So after seeing your video I would like to change the spring maybe getting a more snappy opening. The knife is NEW but I ‘ve got from a friends from the States ( live in Sweden ) and I don't think Blade Ops will send me the springs. Could you give me some indication on the springs? 🙏Thank You very much .Sandro
@SIAS92
Жыл бұрын
Is it normal to have a little play in the blade? Mine has had a little wiggle in the blade when opened since I got it two years ago. From what i can tell if the tolerances were a little tighter i wouldnt have the wobble.
@megaronknives3032
Жыл бұрын
that´s normal for most auto knives, especially in that price range. No worries.
@devalishxb91
3 жыл бұрын
What upgraded spring would work best I want max torque
@tghartman321
3 жыл бұрын
Damn. Wish I hadn't watched this. I bought the S30V version from Blade Ops 3 days ago. I usually disassemble, clean, and lube all my knives. Never had a problem until now. The spring on mine has the upper pin in a different location, making it impossible to put back together. Blade Ops says since I took the knife apart the warranty is void, so basically I have a bunch of parts that will never again be an assembled knife. Be smart. Don't take this one apart!!!
@megaronknives3032
3 жыл бұрын
It's not simple with this one. Had to try it a few times as well. Keep trying it should work
@tghartman321
3 жыл бұрын
@@megaronknives3032 I'm not blaming you for posting this lol. Unfortunately while struggling (for several hours) to reassemble, the tiny spring that activates the button lock shot across the room. I spent over an hour with a flashlight looking for it, before giving up on it. Also the pivot spring has the part that goes into the knife tang is in a very akward position, mush different than on your model. I'll probably just hold onto the pieces until I find a replacement for the spring I lost, and use it as a button lock knife, the way Boker intended. For those that don't know, these Strike and Kalishnakov autos are aftermarket modifications, ( it was an employee at BladeHQ that first discovered how easy they are to convert) and Boker won't cover them under warranty, as they were only originally sold as button locks.
@Kyzalas_
Жыл бұрын
Mines safety is a little bit loose and makes a sound do you have the same issue;
@megaronknives3032
Жыл бұрын
if you take the front scales off, you can tighten down the safety on the screw from inside
@alexlinares75
Жыл бұрын
Can this knife be made into non-auto?
@megaronknives3032
Жыл бұрын
yes if you remove the spring. Would go with a different knife in general for that though..
@dclaw5255
3 жыл бұрын
Does anyone know the spring size? .375 or .50? Just bought 2 boker pluses and found better springs to put in them
@sandrosantagata3562
2 жыл бұрын
Hello David! I also wants to change the spring to my new Strike plus Tanto( is not very snappy ) . I don’t know the springs size ,neither where to purchase them ( Blade Ops is the only chance , I guess…). Where did you find the better springs?
@WesleyEvan87
2 жыл бұрын
Oil your knives as soon as you get them out of the box.
@gregs7519
2 жыл бұрын
Blade or pivot point?
@cartersmith2790
3 жыл бұрын
Does anyone know what size the spring is? I lost mine 😂
@megaronknives3032
3 жыл бұрын
Contact the place where you bought it, Boeker will probably replace it.
Пікірлер: 45