this is stupid, i don't understand why you didn't just use magic to put the bolt an nut in,
@berndbeispielmensch
6 жыл бұрын
Because he is not allowed to use magic outside of Hogwarts ;)
@johnpepe4501
6 жыл бұрын
if u real need how to know reality magic find me
@nickjimenez9983
6 жыл бұрын
Orlando Pockets This was three years ago but now you can see if comments are edited its not edited
@fft2020
9 жыл бұрын
why da f am I watching this ?
@benmcfadden7061
9 жыл бұрын
ikr
@NylaVox
6 жыл бұрын
fft2020 I thought he meant lightning ⛈ bolt~ 😔
@boandersson5276
5 жыл бұрын
agreee
@bannerline
7 жыл бұрын
Great stuff. Thanks so much for this! I will try it!
@JFBence
7 жыл бұрын
There is actually a puzzle toy like this. You have a flat bottle, a nut, a screw, a cotter pin and a wooden ball. You use the ball and the inner side of the bottle to unscrew it!
@biscuitsalive
9 жыл бұрын
I'm not going to waste my time trying to do that. I shall waste my time watching you do it instead.
@SuperSaltydog77
8 жыл бұрын
Because the thread on the nut and bolt are "right handed" gravity will cause the nut to loosen when the nut is on the bottom. If the nut was on top then gravity coupled with the right hand thread will cause the nut to tighten. This whole scenario would work in reverse if the thread was "left handed".
@hefhaus4840
6 жыл бұрын
That is five minutes of my life I am not going to get back again. Why did I watch that?! lol
@bradleyduvall5161
2 жыл бұрын
I have done this before. But we have 2 bolts, 2 washers, 2 nuts. Holes are drilled loose so bolt can move freely. It is a challenge but pretty simple once you get the hang of it. And we do not use any wireto put the nut on.
@gjmob
8 жыл бұрын
My dog is pretty good at this kind of thing. You kick him in the guts, and he either makes a spring for your nuts or a bolt for the door !
@billhoffner1409
9 жыл бұрын
lol..All you need to do is hold the wood dowel and spin the bottle. The nut will thread on or off depending on the direction you spin the bottle
@peterfehr8989
8 жыл бұрын
I have a bottle like that too and I don't need any paper or nitle what ever you use to do it
@1964csilva
8 жыл бұрын
I love turtles
@Mrm0nG0
8 жыл бұрын
Oh great, 5 min of my life i'll never get back
@johnjesus971
8 жыл бұрын
+Robert Miller Then you spend another minute writing a comment?
@Mrm0nG0
8 жыл бұрын
actually about 5 sec
@utterants
8 жыл бұрын
+BandAid Yes, but you came back to comment on the response to your comment.
@Mrm0nG0
8 жыл бұрын
and about another 5 sec
@utterants
8 жыл бұрын
+BandAid Like Tescos points - they all add up
@rodmascotto6750
7 жыл бұрын
would any glass bottle work?
@goyeabuddy
8 жыл бұрын
ok I got it, when my wife yells at me to get out of the house, I'll go out to the garage & do this!
@creeperlamoureux
9 жыл бұрын
oh i thought it was Bottle in a bottle
@WetWillie67
9 жыл бұрын
I know right
@kris9118
8 жыл бұрын
perfect toy for british
@tjseagrove
8 жыл бұрын
You do not need the paper of paperclicp. Can all be done just with dowel, bolt, and nut.
@sosted
8 жыл бұрын
Young frankenstein
@OnlyNotes
8 жыл бұрын
Torque spec on that bolt? ;)
@rodneyemmerich8828
8 жыл бұрын
You will make an excellent gynecologist
@kdmellor
6 жыл бұрын
What do people at your work think when they hear that thumping sound coming from your office?
@rajamanickam9707
8 жыл бұрын
v good
@667hodge
8 жыл бұрын
is there a message in the bottle?
@draftelite6770
7 жыл бұрын
Why is a football coach telling me how to do this.
@majorleaguinfidel
7 жыл бұрын
Combat Ready probably learned it from the science teacher. Its basic physics.
@austinlindsay
8 жыл бұрын
Should've used a the eraser end of a pencil to thread the bolt. And a steadier cameraman to film the video.
@VC27
7 жыл бұрын
@Austin Lindsay - That is an absolutely brilliant idea!
@martinoamello3017
7 жыл бұрын
So this is how you drink in the bar for free, huh?
@davidmeale9572
8 жыл бұрын
...and a life !!!
@offroad5798
6 жыл бұрын
So basically I need to find the perfect glass bottle...
@TheStroiDom
8 жыл бұрын
Excellent work out.
@josepharmstrong5693
8 жыл бұрын
I can do it without the paper and wire and use nothing but the stick to put bolt and nut on and take it off while inside the bottle
@HirumiKato
8 жыл бұрын
Is this Bill Paxton?
@victorstalick5528
8 жыл бұрын
So what did he prove?
@ScrewedupClicksta713
3 жыл бұрын
:23 haven’t dropped one of those in a while unfortunately
@jonvincentmusic
8 жыл бұрын
Why don't use use a strong magnet on the other side of the glass to turn the nut.
@thewatcher2509
8 жыл бұрын
+majorfubar69 What I was thinking too. I didn't make it to 4:31
@davidwoosley
8 жыл бұрын
Ditto. In fact, with a strong enough and cleverly built electromagnet that surrounds the bottle, the bolt could be tightened *tight* in a matter of seconds.
@wayneashby5030
8 жыл бұрын
+Furyrulez To put it together, I was thinking of the magnet trick too -- I would use a strong neodymium magnet. The magnet wouldn't turn the screw if the screw head is wedged into the wood hole a little bit first, the way he showed in the video.
@OffersBusiness
8 жыл бұрын
What is the use of Bolt in the Bottle? Why should I do this?
@megatron5040
8 жыл бұрын
+OffersBusiness It used to be done as a puzzle. You challenge clueless people to figure out how to get the stick back out and then watch them get frustrated. Bonus points if you offer a prize so they don't just instantly give up. ETA: Oh, and you tell them they can't use any tools or break the bottle.
@gasfrommyanusi0i594
8 жыл бұрын
I started out looking for a video on how isis was created and I landed on this. Welcome to the interwebz
@delta9thcfan
8 жыл бұрын
sir, it's called a carriage bolt
@unitedpootisfoundati
7 жыл бұрын
anxiety.mp4
@mansooraliali6277
8 жыл бұрын
Why he did it ???
@BC___1
7 жыл бұрын
watching you tighten the bolt triggered my OCD really bad for some reason
@xXdevil9852Xx
9 жыл бұрын
I went to Computer Hardware to Bolt in the Bottle. KZitem...
@EZCarnivore
9 жыл бұрын
Isaiah TechniFixer Me too =P
@pirkst5227
9 жыл бұрын
Their is a guy that puts a ball a nut and a bolt and puts it together with out cheating like this guy and can get it apart
@YellowZnow88
7 жыл бұрын
Have you seen the guy that does this the legit way???
@HukeLLL
8 жыл бұрын
Still wondering why he did this and why he couldn't screw it on before he put it in the bottle
@blox9000
8 жыл бұрын
The bottle can't fit in the bottle when it's screwed on
@julioseviltwin2304
7 жыл бұрын
@luke ..moron
@blox9000
7 жыл бұрын
Luke Horner you forgot to get out the bottle and the bottle outta the bottle in the bottle
@viktord.4456
9 жыл бұрын
Some people have too much free time on their hands!
@harpodjangorose9696
8 жыл бұрын
A KZitem commenter should think twice before saying that.
@MrKabDrivr
8 жыл бұрын
The art of time wasting... Master level...
@rickwells8113
7 жыл бұрын
Why?
@ImIPoize
8 жыл бұрын
What's the point?
@harpodjangorose9696
8 жыл бұрын
To pass the time aimlessly. Another great way to aimlessly pass time is to leave comments on KZitem.
@ImIPoize
8 жыл бұрын
My comment wasn't aimless. Fairly relevant.
@harpodjangorose9696
8 жыл бұрын
I'm certain that a man who threads a bolt inside of a bottle feels his efforts are relevant as well.
@ImIPoize
8 жыл бұрын
That's what's wrong with this world. Lol
@ImIPoize
8 жыл бұрын
Life, is a problem solving exercise. This is just stupid..
@bernarddover1442
6 жыл бұрын
He doesn't go out
@TheDaringPastry1313
7 жыл бұрын
you can do it without the paper and the paperclip.... lol
@sangrino7166
9 жыл бұрын
Can't you just drop it in?
@charlesfindley
9 жыл бұрын
Nicholas Giovanello The point is to make it so they cant get it out.
@568min
8 жыл бұрын
Just for to kill the time free
@JamesScott72
9 жыл бұрын
BUT WHERE IS THE GENIE?!
@EricH_1983
10 жыл бұрын
I would of ended up smashing over my collegues head whilst shouting teamwork....
@RobertoX-ro8sv
7 жыл бұрын
WHY?
@mauriciohildolfowilsonjarp7700
8 жыл бұрын
mmmmmmh... ¿Y ésto... para qué sirve...?
@1964csilva
8 жыл бұрын
+Mauricio Hildolfo Wilson Jarpa matar curiosa
@massimodesigner3677
8 жыл бұрын
un mese ci vuole .o_-O.
@BenBenkc
9 жыл бұрын
next time, use magnets :)
@nilsholgerson7933
9 жыл бұрын
Trust the asian!
@JJE2010MO
6 жыл бұрын
Love this idea! You could even make 1 or 2 wild cards by putting super glue on the nut so it won't come apart. It would be fun to watch that team!!!
@Wernping
6 жыл бұрын
puck
@electricianbytrade6013
8 жыл бұрын
not sure what I just watched or why...
@jaulloa21
9 жыл бұрын
Cocaine is one hell of a drug.
@harpodjangorose9696
8 жыл бұрын
Fuck this couch!
@tomfrench9186
6 жыл бұрын
smoking cigarettes cures salmon
@garylist9
6 жыл бұрын
Great stuff!!😀
@philiphart750
8 ай бұрын
Using paper and small dal rod is CHEATING. I have NEVER cheated. I put the bolt and nut in the bottle, then the dal rod with the hole In it. Stand the bolt up with the dal rod then put the bolt in the hole. Then put the bolt on the nut and pull it to the top of the bottle and spin the bottle and the nut will screw on. I have entertained people for years and it works quickly.😢poor showmanship.
@matteedstrom
9 жыл бұрын
A more easy way is to use a magnet to spin the nut, i prefer neodynium magnets.
@MrWizards1974
6 жыл бұрын
How about moving the mic away from the work and closer to your mouth
@civilwar1234
8 жыл бұрын
Nice job!!!
@michaelhenwood4046
8 жыл бұрын
Is there any real point to this?
@1964csilva
8 жыл бұрын
+Michael Henwood yes to learm how build airplanes
@yukiyuki9506
8 жыл бұрын
How to get the bolt out: Step one: Grab the bottle Step two: Smash the bottle Step three: Unscrew the nut with your hand Step four: Pull the bolt out He never said you cant use your hands to unscrew it or not to smash it I followed the rules didn't I :)
@joep6503
8 жыл бұрын
luke Davies kzitem.info/news/bejne/066uqJukiXN0eoIm42s
@Megaladon-il9zw
8 жыл бұрын
smash = brake which he said not to do
@newsoutletnewsnews8122
8 жыл бұрын
+luke Davies no you didn't :) you didn't watch the whole video... its okay we all make mistakes
@tristanclark7086
8 жыл бұрын
you cheated with this so bad, it is not necessary to use either the paper or the paper clip, you just need a small cork ball inside the bottle, I made one of these myself and it works fine without cheating.
@oodimvale
8 жыл бұрын
very nice.... congratulations...... São Paulo - Capital - Brasil
@darylw156
7 жыл бұрын
Now do it without the paper and paper clip.
@hunthunter4333
8 жыл бұрын
? are you crazy
@YknotLearnall
7 жыл бұрын
use vibration on the dowel, such as from a vibrator, or electric toothbrush... to thread it on as well.
@TheLaenCZ
8 жыл бұрын
why :D
@user-xs5fj3ms2l
6 жыл бұрын
I would suspect a long flat-head screwdriver would be easier to turn the nut to screw it on. It would be flat to provide more tension on the nut surface to screw it on. Plus, the screwdriver would not be as flexible as a paperclip.
@ianthewonderful
6 жыл бұрын
That's amazing - how did you do it?
@poindy866
8 жыл бұрын
loop an 1/4 wide elastic over the nut that will reach out the opening ( 4 inch ) once it is started and like a tracked vehicle , spin on the nut ...faster
@imigliorigiardinieri-roma-2461
8 жыл бұрын
perchè....
@mrsidneyapolinario
7 жыл бұрын
Que bacana meu amigo...
@user-lj2ep9iq1v
7 жыл бұрын
what??
@clliffvoss1158
9 жыл бұрын
maybe cool for kids
@burvislvsaukans877
8 жыл бұрын
wow col thanks you dat is cool
@michaelangel6201
8 жыл бұрын
why not just use a magnet to twist the screw?
@montydog35
8 жыл бұрын
+Michael Angel Because he said at 4:31 you could use only what you see
@subrataraychaudhury6797
7 жыл бұрын
You can't. If you are thinking you can turn the nut using a magnet keeping the bolt stationary, that won't be possible. Both nut and bolt will become magnetized and will stick together. Well, you can try with a steel nut and aluminium bolt.
@ChristopherDemetrick
8 жыл бұрын
I neodymium magnet worked best for me.
@ofcv1238
9 жыл бұрын
nice video. i find it amusing that so many are cynical about time invested in creating games. they all would surely invest an hour of time at an expensive dinner of adults trying to resolve. for some reason knowing how to make something seems to debase the entertainment value of the end product. not a positive statement about human nature.
@rogerball7569
9 жыл бұрын
Why r there so many haters this is pretty cool
@_droid
8 жыл бұрын
Pretty cool except for the fact that I have servo controlled motor system that can produce better results than these bottles in less than 10 seconds... Oh! Worry me! I have too much money. :/
@AlutaShade
8 жыл бұрын
You could probably just use a strong magnet to help tighten it instead of the paper clip ;)
@erikmarkus7467
8 жыл бұрын
+AlutaShade i dont think that works at all. spinning the magnet would not spin the nut unless they are in contact, which they wouldnt be.
@raulking9755
8 жыл бұрын
12(1461
@fuckyougoogleplus8667
10 жыл бұрын
Put some tape on the paper clip to give it more gripping power on the nut
@myv84x45
7 жыл бұрын
A strong magnet would have helped you thread the nut Great video
Пікірлер: 189