A video on how to install a boost gauge on a 2019 Volkswagen Jetta 1.4 T. I have also included the link for the adapter on eBay if you wish to purchase. rover.ebay.com...
Panic! At The Disco in the background is such a mood!
@royalautodetailing5092
4 жыл бұрын
I just did the blow off valve on my Jetta gonna do the boost gauge today!
@FF54Vic
4 жыл бұрын
Carlos Garcia What year is your Jetta?
@royalautodetailing5092
4 жыл бұрын
FF54 Vic 2019 Jetta s manual 1.4t
@FF54Vic
4 жыл бұрын
Carlos Garcia Do you have a video of how you did the blowoff valve? I was under the impression we had diverter valves or an internal wastegate from the research I’ve done. I would be curious to see how you installed the Blow off valve. Because I was actually looking at doing one on mine.
@royalautodetailing5092
4 жыл бұрын
FF54 Vic ya we do have one bro but I just installed the forge bov kit that’s for the 2017 Jetta 1.4 and it bolts right up throws no codes if you use the same boost sensor. Otherwise it will throw codes but other than that it works flawlessly makes my car sound quicker that’ll what it is now all I need is some wheels and exhaust
@FF54Vic
4 жыл бұрын
Carlos Garcia nice thanks man
@homelesssilhouette
4 жыл бұрын
Sick bro, for no rev limiter just turn off asr in the infotainment Just go to car, bottom right settings then first option Then you can put it in gear and rev and it wont have a limit
@FF54Vic
4 жыл бұрын
BlueConditionOfficial cool thanks
@dest125
2 жыл бұрын
Is this for m/t only or automatic
@jaxonbutters1243
2 жыл бұрын
automatic?
@coreymarrero
Жыл бұрын
Can you do this same setup for like the go fast bits bpv instead of taping in the vaccum line under the intake this is how I did it on my 17 Jetta with the dump valve this seems more efficient
@aidanrakowski2234
3 жыл бұрын
Bro can u add the purchase link I wanna buy it
@williamdixoniii
4 жыл бұрын
Finished my install. Your videos were a ton a help bud. Thanks!! Getting that adapter made it a breeze.
@jtofficial2952
3 жыл бұрын
Where can I get this adapter for the pipe to fit on? UK... thankyou
@williamdixoniii
3 жыл бұрын
JT Official I got the adapter on amazon. It took a few weeks as they only seem to have it in China. However I have heard the adapter can cause issues so ended up getting a P3 gauge that hooks directly into your OBDII.
@04gtboy45
2 жыл бұрын
Great video! I’m adding a boost gauge to my R-Line this weekend when I do my drop springs, strut brace and Forge dump valve, so thank you! Have you done a down pipe yet? If so, any opinions? I have a Borla resonator and muffler delete done and will be installing my JB4……thinking the down pipe should help some….. you inspired me brother, maybe I’ll make a few vids!!!!
@FF54Vic
2 жыл бұрын
I used the factory ground behind the kick panel where the hood lever is.
@FF54Vic
2 жыл бұрын
No I didn’t down a down pipe. I deleted the resonator, and the silencer. I had mine straight piped from the cat back to the muffler
@FF54Vic
2 жыл бұрын
Thank you I tried to be as detailed or helpful in my videos as possible. I did trade my Jetta in on a truck. But I’m still willing to help and answer questions on the Jetta’s.
@04gtboy45
2 жыл бұрын
Thanks again brother. Be safe…..saw your FF tag. Wife was a FF…. I’m also a 1st Responder.
@nickcarlock3197
Жыл бұрын
@@FF54Vic no way I did the same setup on my 1.5 se 22. It sounds wonderful especially higher rpm shifts. Definitely adding a jb4 and a down pipe
@tsuzuku6427
3 жыл бұрын
Hey, fellow Jetta owner here, I was curious about the red accent on the shifter... Is that the stock shifter or after market? and if it is the stock one; is there a way to take it apart to paint those silver bits? Currently working on deleting all the little silver bits on the car to another color and the shifter is one part that I haven't seen much on disassembling. Thanks
@FF54Vic
3 жыл бұрын
The red accents on the or around the shifter are plasty dip basically pops out you have two screws underneath the one small trim piece closest to the cupholder. And then you can separate shift from the plastic so you’re able to paint it
@nickcarlock3197
Жыл бұрын
@@FF54Vic also that’s a super sick job I need to do that to match my red Jetta!
@FF54Vic
Жыл бұрын
@@nickcarlock3197 thank uou
@ApolloMediaProductions
2 жыл бұрын
Where does the vacuum line run? The one wrapped In red
@FF54Vic
2 жыл бұрын
It runs inside the car to the boost gauge. Per more accurate reading I would go to the sensor on the charge pipe which if you buy that adapter it’ll still fit in the same spot I got information that wasn’t 100% correct. When they were referring to putting it on the map sensor. I believe I updated a video with that correction in it
@ApolloMediaProductions
2 жыл бұрын
Ok cause I’m trying install a vacuum exhaust cut out but idk what line to run for a vacuum line
@FF54Vic
2 жыл бұрын
@@ApolloMediaProductions the map sensor would be your best bet for that. You will need that adapter which I think the link to it is in the video description. The map sensor is a true vacuum with that adapter added on it.
@ApolloMediaProductions
2 жыл бұрын
@@FF54Vic awesome thanks I really appreciate it
@kylewilson1011
8 ай бұрын
Link is no longer valid when I went to purchase gauge. Got a work around or new link for gauge?
@FF54Vic
8 ай бұрын
I can look and see what I can come across and try and repost a new link
@williamdixoniii
4 жыл бұрын
Any issues yet with that boost adapter? I heard it can cause issues with the MAP sensor but at the same time I haven't heard of any real world issues either. I have had it installed on mine for about 2 months. So far so good.
@FF54Vic
4 жыл бұрын
William Dixon III I’m going on 6 months with mine and no issue I also have it split with a T using it to also vent my blow off valve.
@dest125
4 жыл бұрын
I'm curious to know once you added the charge pipe did the vacuum line stay connected to boost control on this video or did you Tee it off to the bov as well? Thanks man
@FF54Vic
2 жыл бұрын
Originally I did use a tee, but I eventually changed it. So I had to add another adaptor for the sensor because of running a boost gauge as well.
@bimmerlife5452
4 жыл бұрын
Hey bro can you control boost gauge or just shows you the RPM
@FF54Vic
4 жыл бұрын
Supra TT Unfortunately I can’t control the boost gauge. It just shows what my boost pressure is at a certain RPM or when the turbo spools up. I haven’t really done any research on adding a boost controller. There’s not a whole lot of research on this platform with a 2019 Jetta‘s. Most of the modification and aftermarket parts are still overseas and are outrageously expensive. Thought of things I’ve read are saying it will be a couple years before they come to the states. At a reasonable price
@RandomVideos-ho4pv
4 жыл бұрын
Yeah me sucks only reason I want intake hear the turbo more because no blow off valve
@williamdixoniii
4 жыл бұрын
Sorry if I missed it in the video but what kind of mount are you using for the gauge? Thanks!
@FF54Vic
4 жыл бұрын
William Dixon III I actually ordered it for my Vic off of the wish app. But decided it would work better over my steering wheel in the jetta
@williamdixoniii
4 жыл бұрын
FF54 Vic hey bud. 1 last thing. I can’t find a diagram for the fuse box to save my life. I’m looking for a constant a switched and a switched with headlights. Again sorry if I missed it in the video.
@FF54Vic
4 жыл бұрын
William Dixon III I actually pulled up the kick panel along the side of the carpet in the factory wire group there is a gray wire with a green stripe in it I actually cut that and spliced my light wire into that so then my boost gauge is illuminated when my factory lights automatically click on in the automatic feature or if I turn them on manually. That wire is actually for the License plate light. And there are a majority of fuses that I maintain constant 12 V wants to car shut off that you could use as your 12 V power supply as well.
@kenanderson5812
4 жыл бұрын
What diameter is the hose going from the boost tap and to boost guage?
@ApolloMediaProductions
2 жыл бұрын
What size line is the break boost hose?
@FF54Vic
2 жыл бұрын
I’m not 100% sure I didn’t go into the brake booster for a vacuum line. If you use that adapter you can go into the crank case sensor. And that’ll give you your vacuum and if you go into the sensor that is identical to the crank case sensor that will give you your boost pressure on the charge pipe
@ApolloMediaProductions
2 жыл бұрын
@@FF54Vic I don’t think the vacuum from crank case sensor is a strong enough vacuum to open exhaust cut out flap
@FF54Vic
2 жыл бұрын
@@ApolloMediaProductions Yeah I’m not 100% sure how strong the vacuum needs to be that’s the same vacuum that I used on my blow off valve. But I’m assuming the pressure is going to need to be heavier for an exhaust valve. If I had to guess I would see the inside diameter is no bigger than a half inch on the brake booster
@FF54Vic
2 жыл бұрын
Let me see if I can get some free time here at work and I’ll see what I can find as far as research for you maybe I might be able to come up with an exact measurement if I googled the specs for the brake booster
@ApolloMediaProductions
2 жыл бұрын
@@FF54Vic thank you so much. I tried to google it and all I found was a OEM replacement
@wesleyhunter501
Жыл бұрын
What's your egr hooked up too? Still stock?
@FF54Vic
Жыл бұрын
Yeah it’s still stock
@trailblazingwithgrey9446
3 жыл бұрын
Where did you get the adapter at? If so you have a link?
@FF54Vic
3 жыл бұрын
I picked it up on eBay I added the link in this comment. www.ebay.com/itm/164598587725
@link4eva10
4 жыл бұрын
How did you Plasti-Dip the dash trim pieces
@FF54Vic
4 жыл бұрын
Christopher Garcia I’m going to be doing a video on how to take the dash trim off probably this weekend.
@TheOneTurk
3 жыл бұрын
Link?
@dylanjennings9724
4 жыл бұрын
Yo hmu bro I gota 19 jetta s. Did the intake an shit bro im tryna find what all we can do to these cars lmk
@FF54Vic
4 жыл бұрын
dylan jennings I just ordered a front lip kit, trunk wing painted to match the car, and a set of headlight eye brows to cover the head lights. But they are all going to be coming from China because there aren’t really any parts in the states. I’m working on fabricating piping to replace the charge pipe so I can add a blow off valve.
@justinkeeler6763
Жыл бұрын
Where did you get your bov
@FF54Vic
Жыл бұрын
I ordered the bov and piping off of eBay then built the charge pipe with the bov. I think forge makes one now for the Jetta. But at the time there weren’t any parts for the car when I got it in 2019
@froylanacevedo6252
2 жыл бұрын
How do you by pass that rev at 4k?
@FF54Vic
2 жыл бұрын
I think the only way to get a by pass on the stock rev is a tune. I didn’t do a tune on mine so it would still only rev to 4k in neutral .
Пікірлер: 70