Flash cure the gel stamp on your stamper for 10 seconds 😘❤️
@toxicpredator4
4 жыл бұрын
And what will happen?
@HappiSabi
4 жыл бұрын
@@toxicpredator4 it will cure 🤷♀️😅❤️
@laurd
3 жыл бұрын
TOXIC PREDATOR I’m assuming it will make the gel polish less runny when applying the stamp on your nail so it’ll come out nicer and more clear but I wouldn’t flash cure for long in case it cures your stamper lol
@sumitamoon
5 жыл бұрын
Very useful video...Thank u for making it
@ligaskirbauska8652
4 жыл бұрын
The problem is in stamper head..you can buff stamper head so it’s not that shiny,then stamping gel won’t start to reduce,get thiner lines or there is some stampers that are like sticky,those work the best with gel polishes,gel steaming gels 😉...also about liquid latex,as I do so loads of crafts,I buy liter of it for 6£ on eBay,simple,pure liquid latex,goes for ages and also works the best
@CJLinOHIO
2 жыл бұрын
I have been using regular nail polish for stamping over gel polish. The problem is when you put the top coat on the regular polish will sometimes streak. So I have my order in for the gel stamping polish. I'm trying to find videos that show the best way to use gel stamping polish. I think it is a great idea since the gel polish will not dry and you have plenty of time to work with the stamper before you cure your design.
@juliesnails7
5 жыл бұрын
Nice review hun I just waiting for them I have ordered black and white tfs😍😍😍
@foreverglitternails7681
5 жыл бұрын
I have the black as well, very pigmented also. :) Thanks for your kind comment!
@simple_naildesigns
4 жыл бұрын
Great video
@absynthefaerie
4 жыл бұрын
Just get a liquid latex (if you’re not allergic) and an empty bottle with a brush from Aliexpress, it will dry quickly and works perfectly for a barrier.
@basakparlak8550
Жыл бұрын
Hi! Thanks for clarification, I needed to start buy could you tell me how do you clean stamping tool by knowing that you can't use acetone or alcohol? Thanks in advance for your help
@sechristcorinne
3 жыл бұрын
I usually use acrylic paint to stamp but then have to wait a bit for the acrylic to dry a bit
@rajputshorts1111
2 жыл бұрын
Very nice 👌
@mctamaronels8074
Жыл бұрын
How long does the uv gel take to cure in the uv lamp.Does the stamping gel take longer to cure than gel nail polish?
@artisticnailtrends
4 жыл бұрын
Great video for stampholics like me💕👍😘
@yajhairaperez8210
4 жыл бұрын
Thanks for the video, but I was wondering if you can use regular stamping polish, and finish with a UV/LED polish top coat.
@Poorstargazer23
3 жыл бұрын
Yes. Just make sure it's dry. People have been layering normal air dry polish with gel for years.
@suspicioushippopotamus
3 жыл бұрын
normal nail polish doesn't like to stick to the gel inhibition layer. i suggest if you want to use regular nail polish for the stamp, make sure it's completely dry on the stamp before pressing it onto the gel polish. you need to keep the sticky inhibition layer for the gel top coat to stick, so if you want to use regular stamping polish, rather steer clear of stamps that cover a lot of the surface area.
@MolliDearest
4 жыл бұрын
How did you get the gel to be so Crisp? Mine keeps getting squished looking when I apply it... Not crisp at all. :(
@Axtasia
2 жыл бұрын
Hi, hope you still see this. For me personally works to put a thin layer of non stick top coat and then stamp the fine designes, my lines get the thinest that way 🙂
@evelynborner9492
2 жыл бұрын
Thank you for sharing 💖 I will try this for the next time… I have the same problem with squished designs and I hope to get fine designs with stamping gel … I am often to slowly for normal stamping polish 🙈😅
@haidyessam6508
Жыл бұрын
Can we remove it with aceton if i just stamped it
@ericastafford-cherry2115
4 жыл бұрын
What do you do about ventilation and stamping polish. I have almost had to go to er
@FannyfrenchTV
4 жыл бұрын
What?
@kamillagirl
3 жыл бұрын
I would get a more well known brand of liquid latex, like pueen
@babbydinobat
4 жыл бұрын
U need set the gel frist before stamping the gel
@ouzarua
2 жыл бұрын
Cure it on stamper, cover with top coat, cure again and pick up with tweezers. You’re welcome.
@WarningBillionare
4 жыл бұрын
This product has first ingredient MMA so would be careful when using this on me or others!
@zayndoyle6666
3 жыл бұрын
The stamping gel ?
@WarningBillionare
3 жыл бұрын
@@zayndoyle6666 yes
@kuzumi920
3 жыл бұрын
Where did you see that? The ingredients aren't mentioned on the packaging or the website.
Пікірлер: 35