The true heroes of the Internet are people who post videos on youtube on how to fix appliances.
@nicholascarfagno1758
2 жыл бұрын
This video may be 8 years old, but thank you. Was ready to spend 1k on a new dryer and figured what the hell, let me try this. Popped off the back, pressed the reset and dryer is good as new. Saved me $1000 bucks! THANK YOU!
@miteeman
2 жыл бұрын
Glad to help! It may come back so look up my other video on extreme cleaning.
@Lexy60
9 ай бұрын
Thanks for such clear explanation. I followed the steps to reset and clean my Siemens dryer (pretty much exactly the same model) and it worked perfectly! I also thoroughly cleaned the condenser which was probably the root cause!
@finlaydolansky3961
7 жыл бұрын
HiI noted that you never really figures out the problem. I had the exact same problem as you, same error code etc. Tested and tried everything. I finally found the problem on the main control board. It's the power relay components. These small power 12v DC controlled relays open and close letting 240v AC power go through to the rear heater. Problem= the small contacts inside the relay burn out (they are similar in operation to distributor points in old cars, only physically smaller) and pit and the resist current flow or simply physically do not make contact. I discovered that when shorted,joined,bridged the 240v AC soldered points for that relay on the board, the heater worked and the machine did not stop with the F09 error. I cut off the top plastic from the three relays I thought were the problem and found two had blackened and worn out contact surfaces. Replacing these two relays fixed the problem. I think this is a common problem with relays after long usage. Hope this helps someone. Loads of pictures if anyone is interested.
@miteeman
7 жыл бұрын
Thank you very much for posting this. I wasn't ever able to find/fix the problem before I sold it but this sounds plausible. It didn't make sense to replace the motherboard since all the digital electronics worked, but I hadn't considered the relays might be bad. If you have any pictures I would love to get them. You can send me a private message by doing the following and I'll give you my email to send the pics, or you could just upload them and post a link yourself. - clicking channel name underneath the video.- Click the About tab in my channel- Click Send message- Type in your private message and click Send.
@goosieyotube
6 жыл бұрын
Please could you load pictures about it?
@mpiletic11
5 жыл бұрын
Hi Finlay, actually I have encounteres same issue. Do you still have pictures?
@wilson604
3 жыл бұрын
Hi Finlay, thanks for sharing. My dryer is having the same problems, wondering if you can share the pics as well. thanks!
@jean-francoisgarmy4556
7 жыл бұрын
Thank you for this video : I had the same problem with a Siemens dryer, which is basically the same - except the name sticker, that is - and your explanations were right on the spot. A thorough cleaning of the heat duct, fan and heater did the trick after the reset of the thermal limiter whose breaker had tripped. So far, so good. Thanks again for your help, MITEEman!
@miteeman
7 жыл бұрын
If this has happened to you multiple times it will likely come back. See the post 3mo ago by Finlay Dolansky. He has a very good theory. Check your motherboard relays for any signs of damage. You can possibly replace the relays on them if you're good with a soldering iron, or the simpler but more expensive thing would be to replace the motherboard.
@jean-francoisgarmy4556
7 жыл бұрын
I concur... It was the first time this happened, so I hope it was just the fact that the dryer is in a quite small room and that we forgot to open the door leading to the garage where the heat could be evacuated, that combined with the fact the heat duct needed some serious cleaning could hopefully explain the tripped breaker on the temperature limiter, which just did its job. Now, if this happen again I’ll have to follow your advice and investigate further… Of course, this happens on the first autumn days, in Brittany well know around here for its cold humidity and legendary winter drizzle…
@fogel0403
6 жыл бұрын
Thanks for this video. I had the same problem, error code F0 on my Siemens dryer. I followed all your tips and the problem was solved after vacuuming the heater and the thermostat on the back. Thanks again.
@jp040759
2 жыл бұрын
Great autopsy and analytics on what does what. THANX
@vr2295
2 жыл бұрын
That was it! Pressing the red reset button fixed the problem!
@chrisDeSimpele
2 жыл бұрын
Thanks a lot! The reset fixed my Bosch WTE84302FG/08. I owe you a beer 😃
@chrisDeSimpele
2 жыл бұрын
Not to mention how I cool my wife things I am now 😋
@happinesscafe1
5 жыл бұрын
Great instruction. Followed this exactly. Was able to get rid of error code F 09! Thanks
@koyangvladz1656
2 жыл бұрын
Thank you for sharing this video Sir
@paulb9769
9 ай бұрын
Thermal limiter is not tripped on this one. What was the room temperature when you tested NTC?
@Mckhuus
8 жыл бұрын
I have no Fault on the screen, the dryer just will not start. There is power the light comes on when I open the door but the start button just keeps flashing. I cleaned everything checked the water pump (it works when I put water into the reservoir) Any thoughts?
@JeffHannanUK
4 жыл бұрын
Many thanks. Pressing that red button fixes it.
@chrishund65
3 жыл бұрын
I pressed the reset code button about six months ago and now I get the same F09 again. Can we just keep pressing the reset button indefinitely?
@GeorgeHuMIT
3 жыл бұрын
Yes, but it if you get tired of that game, I believe the appropriate next step is to replace the motherboard - the relays are likely bad. This, however, is a very expensive part. You may want to consider the value left in it vs buying a new one.
@davidcoro27
2 жыл бұрын
Okay, so let’s see if I get similar results. This tumble I have is 12 years old, so spending $192 may be a bit much on such a old machine that making klunking sounds already.
@mickey_Hollywood
3 жыл бұрын
F09=RadioShack thermometer Simple= dirty heating assy, will flash error F09
@pejo156
8 жыл бұрын
I fixet my mashine tenks too you, bravo you are the king
Пікірлер: 30