:You didi a much better job explaining all the functions than most people thanks
@earljklec1684
4 жыл бұрын
Dude ! Thank you ! Great job
@bezoozime9170
3 жыл бұрын
Thank you. Very helpful
@yoursfriendly3053
4 жыл бұрын
I have ordered one. Fantastic job pal....!!!
@icarus3604
2 жыл бұрын
Are you still happy with your purchase?
@suspectedcrab
4 ай бұрын
Way better than sifting through a manual...
@muhammadalras1111
3 жыл бұрын
Thanks
@valdanowill
2 жыл бұрын
GREAT
@tooltipswithtommy
2 жыл бұрын
Thanks
@eliosaleh9492
2 жыл бұрын
Great video ! One question my GLM 50 C is not showing annotation in function mode , like when you scroll in all the option , no title show whatsoever (ex : lengh , memory , etc..)
@tooltipswithtommy
2 жыл бұрын
you may have something wrong with your device. when i hit the function button on mine it says at the top of the screen what type of measuring it is set to. when looking through the settings i see no where to turn that on and off.
@outlet6989
Жыл бұрын
I've got one of these. I never measure my just holding it in my hand. When you measure that way, your body movement will corrupt the measurement. Even if you place it on a hard surface, changing its facing by turning the tool can ruin the measurement. I only use mine with a tripod. That's why they put the attachment screw on the underside. This is a tool that doesn't like to be handheld.
@tooltipswithtommy
Жыл бұрын
I think I mentioned that in the video.
@shiblyahmed3720
3 жыл бұрын
I am planning to returning my device I have purchased. This is a very good and powerful tool but I just don't want the reading picks up 1/32s. I wish it would limit to 1/16ths
@tooltipswithtommy
3 жыл бұрын
Sorry it's so precise.
@mzimmerman12
2 жыл бұрын
@@tooltipswithtommy I agree. It's only accurate to 1/16 the why do I have to deal with mental calculations of 13/32's. That part is a pain for sure. Other than that it is a great tool
@tooltipswithtommy
2 жыл бұрын
The new ones are adjustable. So look into that.
@shiblyahmed3720
2 жыл бұрын
@@tooltipswithtommy Thank you. I look forward to..
@walterantonello8581
3 жыл бұрын
Can this be used in open daylight ? Also can it be used for setting out measurements?
@tooltipswithtommy
3 жыл бұрын
Unfortunately, it's hard to see the laser in daylight. You may want to check out the glm400, it has a camera, which can make it more useful in daylight. It has a stake out function. If that's what you're looking for.
@tooltipswithtommy
3 жыл бұрын
I just saw that bosch will release a new range finder with a green laser, that will be much easier to see outside. GLM50-27CG
@bluemantom77
4 жыл бұрын
I got the same one GLM50c I see another model glm-50cx i don't get the difference it looks the same works the same is the x variant a certain retail store exclusive has the exact same functions as the GLM50c
@tooltipswithtommy
4 жыл бұрын
I think you are correct, they are the same
@mishaguth6537
2 жыл бұрын
Great job. What do you mean by "mark it off?" I have the glm 50 c. Thank you.
@tooltipswithtommy
2 жыл бұрын
sorry but i'm not sure what you're asking, it's been awhile since i did this video. can you elaborate?
@mishaguth6537
2 жыл бұрын
@@tooltipswithtommy You referred to just "mark it off" a couple of times and swiped your finger on the back of the laser. Maybe I misunderstood? :)
@yuvrajsinhtank1361
4 жыл бұрын
How much accurate it is... In length measurements and angle measurements? Is it showing everything in "mm" also aur working only in "ft" and "inches" ??
@tooltipswithtommy
4 жыл бұрын
The glm50 is accurate to 1/16th of an inch. And you can use imperial or the metric system, whichever you prefer
@trevorfraites316
3 жыл бұрын
I bought this because I am an architect and also real estate appraiser. I am now thinking that I bought the wrong item as it does not have a type of measurement that’s called Pythagorean (my Stanley laser had). In order to get that measurement using this Bosch I would have to use one of the targets that’s received in the box, which takes more time to do that particular measurement. Can you tell me if it’s there and how do I find it?
@tooltipswithtommy
3 жыл бұрын
If you can describe to me what you're trying to measure, or how you'd like to use it, I will absolutely assist you. It does a squared, plus b squared = c squared. Which is the Pythagorean.
@trevorfraites316
3 жыл бұрын
Thank you for such quick response. Let’s say that I want to measure a wall that may be about thirty feet wide ( left to right ). Now I know that I can use a target on one end of the wall then use my laser and when the laser hits the target it give me the length of the wall. The first laser that I had I could have just measure that wall by standing somewhere in front of the wall take the laser beam shoot the laser at one end that’s 90 degrees and shoot the laser at the far end of the wall and it gives me the length of that wall. The second option To find the length of that wall I can use the laser by standing anywhere in front of the wall shoot the laser beam at one end, the the other beam at 90 degrees and shoot the other laser beam on the other end and it gives me the length of the wall. Thanks in advance for your help for getting back to me with this important answer.
@tooltipswithtommy
3 жыл бұрын
@@trevorfraites316 I'm going to mess around with mine a bit, but I know it uses the built in inclimometer, and I'm afraid it may only do indirect height measurements. I'll get back to you.
@tooltipswithtommy
3 жыл бұрын
Inclinometer
@tooltipswithtommy
3 жыл бұрын
After trying to do what you've asked, unfortunately it will only do indirect measurements on a vertical plane, using the inclinometer. It won't do it on a horizontal plane. So sorry.
@sunnyhaniff7320
2 жыл бұрын
Have a GLM 165-27 CG can't get it to work need some help
@tooltipswithtommy
2 жыл бұрын
Okay, what you got? I don't have those new ones, but I can probably help you out.
@Joe-hd9cx
2 жыл бұрын
how do you change the fraction from 1 /32" to 1/8" on this device ? i don't need 1/32" , thanks tom
@tooltipswithtommy
2 жыл бұрын
Unfortunately on this series of measuring tools you can't change increments. I've been led to believe that the feedback bosch has gotten on these devices, they have added that to the new series. Sorry. Hopefully I can get one of the new ones and do a video on it.
@tooltipswithtommy
2 жыл бұрын
I just got one of the new ones, and i can confirm that they have a round up button, that allows you to change measuring increments. 1/4 1/8 or 1/16. I'll be doing a video on it in the next couple days.
@aspiringmodernistchef
2 жыл бұрын
@@tooltipswithtommy What's the model number? Is it still GLM50C? How do we tell the new ones apart?
@tooltipswithtommy
2 жыл бұрын
I posted a video last night of the new one
@julianmcintosh7713
2 жыл бұрын
Can you change the unit of measurement on this
@tooltipswithtommy
2 жыл бұрын
Yes, it has imperial, and metric
@naderfawzy5958
3 жыл бұрын
Glm 50c or disto d2?
@tooltipswithtommy
3 жыл бұрын
I can't say anything bad about Leica, however I've never used the d2. Bosch is about to release their new measuring tools, including a green laser. If you're on the fence maybe wait a couple weeks for them to drop.
Пікірлер: 45