This worked for us on a series 4 Bosch, I pulled a much smaller lump of general fluff & limescale than came from yours in the video, but it was enough for ours to come back to life. Thank you so much! 🙂
@georgesworkshop8600
8 ай бұрын
That’s great!👍
@deejayno
8 ай бұрын
Thank you so much sir, from France 🇲🇫🙏
@georgesworkshop8600
8 ай бұрын
Thanks mate! 👍
@shankargouri7854
6 ай бұрын
Thank God n then you also hv come to my rescue n my washer has come on line with life.
@georgesworkshop8600
6 ай бұрын
Thank you for sharing your experience!
@Indira_Ezhilnesan
6 ай бұрын
Thank you so much for the timely saviour video!! Lots and lots of thanks. Really great and useful!
@georgesworkshop8600
6 ай бұрын
Thanks, I’m glad you liked.
@henkeboy1317
7 ай бұрын
Great video👍 I have the E18 problem and when opening the filter the water flows out, not drips. Next time I run the machine the E18 re-appares. What could be wrong?
@henkeboy1317
7 ай бұрын
Hi! Unplugged the waste water outlet and discovered a button and lots of fabric that most certain hinderd the water to flush out. Running a testwash now. 🙏
@georgesworkshop8600
7 ай бұрын
Hi, May slowly the water can pass through blockage, but when quickly needs to let the water out it won’t work. If a hairpin block the pump and open the filter water will flow, as hairpin is a small object, but don’t allow the pump to work. I’d recommend to check the filter/ pump/ tubes thoroughly.
@shankargouri7854
6 ай бұрын
Thanq for sos tips .Hhiii.
@MultiPete58
2 ай бұрын
@@henkeboy1317thanks! I had the same issue as you and also found a button and junk in the outlet!
@irisgershon
Жыл бұрын
You saved me! I watched it, I fixed it!! Thank you!!
@georgesworkshop8600
Жыл бұрын
Nice work 😉👍
@priyankabajaj5332
9 ай бұрын
This video was a saviour.....thank you so much....
@georgesworkshop8600
9 ай бұрын
Thank you for your feedback!
@melekkocak2490
2 жыл бұрын
Çok teşekkür ediyorum çok yardımcı oldunuz?!? Teknikservis 80 tl gelecekti gerek kalmadı .Vielen Dank Tenk you
@georgesworkshop8600
2 жыл бұрын
👍
@synachi
2 жыл бұрын
Hi, I am unable to unscrew the plastic cap there. It is too tight or something is blocking it. Any ideas on how i can do it?
@georgesworkshop8600
2 жыл бұрын
Hi, Probably something blocked the cap. If you cannot remove it, need to take off the drain pump. When removed all tubes may you can see what has stuck there and can clean out. Then you just need to return the pump. Please let me know if you need any help.
@synachi
2 жыл бұрын
@@georgesworkshop8600 Thanks, Can you help me with steps to remove drain pump?
@georgesworkshop8600
2 жыл бұрын
Hi, I don’t have video to remove pump on Bosch washing machine, but I have on a Hoover Washing machine. The method is same, so you can follow the instructions . Please check my video “ Hoover washing machine E03 Error Code. ( blockage in the filter)” kzitem.info/news/bejne/mnuLqZpsjoB4aaQ I hope that will help
@epzikutty6422
4 ай бұрын
Thank you so much 🙌 it's working fine 🎉
@georgesworkshop8600
4 ай бұрын
You're welcome!👍
@linnleth8820
2 жыл бұрын
This video saved me, thank you! 😊🙌
@georgesworkshop8600
2 жыл бұрын
I glad to help
@janicewhite5899
11 ай бұрын
Thanks for your help 😊
@georgesworkshop8600
11 ай бұрын
You are welcome
@aubreychapheya4186
11 ай бұрын
This is awesome about to fix my bosh
@georgesworkshop8600
11 ай бұрын
Thanks Aubrey
@neonshaker9312
2 жыл бұрын
Great stuff! Fixed it!
@georgesworkshop8600
2 жыл бұрын
Congrat!
@nattaphatsaengow546
5 ай бұрын
Thank you so much❤
@georgesworkshop8600
5 ай бұрын
Thanks!
@adelegreen391
2 жыл бұрын
My washer fin it's last wash, but since then it keeps flashing lock (key) symbol an going to 0 ? I've tried all obvious things 🙃 could I fix this myself ?
@georgesworkshop8600
2 жыл бұрын
Hi Adele, My first thought would be the child lock, this is normally 2 buttons combination. If not this, I ‘d say the door lock needs attention.
@sarisohanpaul5276
2 жыл бұрын
Hi thanks for this. I have just tried it and I am still getting error E18. I also cannot get the machine open. Please help.
@georgesworkshop8600
2 жыл бұрын
Hi Sari, Please unplug your machine and a few minutes later the door will be available to open, even the door opener us not broken. It must be a blockage somewhere around the pump or in the tube that join the drum and the pump. Usually black colour and around 5cm diameter.
@sarisohanpaul5276
2 жыл бұрын
@@georgesworkshop8600 thank you so much for your reply George. I tried it again on Saturday and there was indeed something still stuck in there. All is working fine now and no need to pay an engineer! Thank goodness for your video!
@DiggerDan87
3 жыл бұрын
Thank you I've just saved 500 quid thanks
@georgesworkshop8600
3 жыл бұрын
I’m glad if I could help. See you in the next video
@DiggerDan87
3 жыл бұрын
@@georgesworkshop8600 you did funny story order a new Bosch off amazon and they cancelled my delivery and the day it was due I give it another go works fine i fixed the filter over and over couldn't get anything up there I just need to get a wall tie from work now ha thanks again
@georgesworkshop8600
3 жыл бұрын
Well done, good job!😜👍
@RobertMcConnell-yr1ok
Жыл бұрын
Thanks a lot for the help 🙌👍
@georgesworkshop8600
Жыл бұрын
Hi Rob, Thanks for your feedback
@georgesworkshop8600
Жыл бұрын
Thank you for your feedback! Good job! If you like my video I would much appreciate if you could support my channel. Many thanks!
@nima.bakhtiar
Жыл бұрын
Big like for you, other wise i would spend 100 euro for reparation
@georgesworkshop8600
Жыл бұрын
I’m glad to hear that
@georgesworkshop8600
Жыл бұрын
Thank you for your feedback! Good job! If you like my video I would much appreciate if you could support my channel. Many thanks!
@safruali
2 жыл бұрын
You saved me thanks and subscribed 🙏
@georgesworkshop8600
2 жыл бұрын
I am so glad to hear that!
@bhavyamuralimurali1756
3 жыл бұрын
our machine is showing e18 but the water drain has been struck how to remove it
@georgesworkshop8600
3 жыл бұрын
Hi, Do you mean the pump damaged? Or do you presume there is a blockage somewhere?
@georgesworkshop8600
3 жыл бұрын
Hi, Do you mean the pump is damaged and need to be replaced or there is a blockage? Cheers
@RuttalaMonika
Жыл бұрын
Though we cleaned everything it is showing the same error again😢
@georgesworkshop8600
Жыл бұрын
Hi, You should check the filter again. May something that was stuck deeply has moved after you previously cleaned it.
@GurpreetKaur-oo7go
2 жыл бұрын
Thnk you
@qiannieaennie2916
9 ай бұрын
Do you know how can open this one i trying many times can't very hard .. show me how to do
@georgesworkshop8600
9 ай бұрын
Hi, The filter could be opened anti clockwise. It’s hard to turn it and probably you did correctly, but the object that caused the blockage has stuck and not allow you to turn it. You need to take off the pump, otherwise you will broke the filter’s door. I have a video for a Hoover washing machine blockage in the filter. You can watch this video how to do.
@shaileshkumarkushwaha3167
Жыл бұрын
Good job
@SweetGirl-rz2pq
2 жыл бұрын
Thank you
@georgesworkshop8600
2 жыл бұрын
You’re welcome
@nbhuvanesh87
2 жыл бұрын
Thank ful video
@georgesworkshop8600
2 жыл бұрын
Did you find useful?
@sevensmith460
2 жыл бұрын
Thanks man
@georgesworkshop8600
2 жыл бұрын
You’re welcome
@user-oq6fm4hd1f
Жыл бұрын
Thanks you
@georgesworkshop8600
Жыл бұрын
You’re welcome
@harithadarwin5345
2 жыл бұрын
Thankyou soooooooo much 👍🏻👍🏻👍🏻
@georgesworkshop8600
2 жыл бұрын
You’re welcome, I hope you found my video helpful.
@girijasathish4265
2 жыл бұрын
Thank you saved me
@georgesworkshop8600
2 жыл бұрын
Hi, I’m glad you found useful my video
@parafarmaciaviamantova3957
2 жыл бұрын
Thanks Dude
@georgesworkshop8600
2 жыл бұрын
No problem 😉
@kanubabu
2 жыл бұрын
Thanks a lot for dis vedio
@georgesworkshop8600
2 жыл бұрын
Your welcome 😉
@omarmax9664
2 жыл бұрын
Thanks!!!!
@georgesworkshop8600
2 жыл бұрын
I am glad to help
@rangilaesmii7578
2 жыл бұрын
Hi our machine is snowing error 17.can you tell me what is problemm ?
@georgesworkshop8600
2 жыл бұрын
Hi, I looked into and found out this means the inlet pipe is blocked and no water in the machine. There is a little filter where you join the pipe to the machine. Remove the pipe and clean the filter. I hope this will help. Good luck
@rangilaesmii7578
2 жыл бұрын
Showing not snowing😂😂
@rangilaesmii7578
2 жыл бұрын
@@georgesworkshop8600 ok thanks I will try
@PETERYEE.
8 ай бұрын
Hey ive done this & heaps of water came out but its still showing the code??? I dont know what to do?? Please help
@georgesworkshop8600
8 ай бұрын
Hi! Are you sure everything came out? You can try to unplug your machine and leave for 10 minutes, then plug in. May this will help.
@henkeboy1317
7 ай бұрын
Check the waste water outlet. Could be plugged with fabric.
@TheRazvancristian
3 жыл бұрын
My beko machine do that,i start it..all show working,but when i press start to run nothing happens…sometimes start after 10 minutes..but todat i tryed to wash but this time dont run..i wait more then 30 minute.nothing,what i can do?
@georgesworkshop8600
3 жыл бұрын
Hi, How old is your washing machine? Has it been used lot?
@TheRazvancristian
3 жыл бұрын
@@georgesworkshop8600 my girlfriend used every week…maybe twice a week..i just ordered a new door lock …maybe will work if i replace it..because before used to make a door sound and after door was block,but now dont happen that
@georgesworkshop8600
3 жыл бұрын
Hi Cristian, I hope the door lock replacement will help, if not my guess is that, the carbon brush is maybe too worn or stucked. Please let me know, if you could fix it.
@TheRazvancristian
3 жыл бұрын
@@georgesworkshop8600 was door lock part.i replaced it and all works now 👍
@georgesworkshop8600
3 жыл бұрын
Great , congratulations 👍
@user-oq6fm4hd1f
Жыл бұрын
Сработало
@jmacgiii
2 жыл бұрын
How do I reset the sensor?
@georgesworkshop8600
2 жыл бұрын
Hi James, What sensor do you mean? I don’t know any sensor in washing machine. Is it in tumble dryer?
@jmacgiii
2 жыл бұрын
I've cleaned the filter thoroughly but still getting the Er 18 code coming up?
@jmacgiii
2 жыл бұрын
I assume there's a sensor to be reset or how does the error reading come about?
@georgesworkshop8600
2 жыл бұрын
Sorry for the late response, there is no sensor, the error message is automatically deleted if the problem was solved. Did you check the waste pipe? May that is blocked and cause the issue. Or check the pump, it could be there a blockage. Like a stuck hairpin, plastic, coin and cannot come out to the filter.
@yashperla5400
3 жыл бұрын
Machine shows e26, whats it??
@georgesworkshop8600
3 жыл бұрын
Hi, Google says: This error code indicates a faulty analogue pressure sensor in your machine, which identifies how much water is in the machine. Any fault with this sensor stops the machine working efficiently and will need to be attended to. I hope this will help.
@Marialena-vw7ju
Жыл бұрын
The water is disgustingly dirty!! That wash needs multiple washes and rinses!! Ewwwww
@georgesworkshop8600
Жыл бұрын
The blocked water will mature in a short while. When filter has cleaned good to run a high temperature wash.
@Marialena-vw7ju
Жыл бұрын
@@georgesworkshop8600 yes I discovered that it created an odor too despite the clothes being properly washed (as they were trapped inside), and THANKS to you and your video I eventually found the culprit!! However it took emptying manually the machine several times till I finally found the hair tyes which was back breaking using tube to manually remove excess water. THANK you 🙏💟
@rajeshr2381
2 жыл бұрын
E o o error koode
@georgesworkshop8600
2 жыл бұрын
Hi. The E00 code does not indicate an error, but a positive result that the washing machine gives as a result of service testing. In other words, a washing machine Bosch tells us that the service test is passed, there are no errors. Regards George
Пікірлер: 108