I have not quite found any clear instructions that are easy to understand for changing the 3 different stereo modes. But I think I have it figured out now. The part I was always missing was that you can activate the three different stereo modes by changing the main delay mode dial between Loop, Analog and Standard (when you hold the pedal down and insert a second plug into the B-jack). Ooof. Hahah. I think I got it now.
@bedroomlevel
2 жыл бұрын
Once you set the “stereo mode” to pan or wide, it will stay that way as you turn the mode knob through the different settings (analog,tape,warm,reverse) ?
@PedalScience
3 ай бұрын
yes it stays in that output mode for all the delay types
@ArrakisOCE
3 ай бұрын
Will stereo panning work with stereo inputs? I'm running a stereo rig but my DD6 will only pan with mono input (not stereo).
@PedalScience
3 ай бұрын
I'm pretty sure it simply keeps the channels independent i.e dual mono when you have stereo input
@ArrakisOCE
3 ай бұрын
@@PedalScience awwww no.. I just ordered one to replace the DD6 for no reason lol
@PedalScience
2 ай бұрын
I don't have my DD-7 or DD-8 anymore to confirm for you so maybe you can check? Also, perhaps I have misinterpreted your question - if you have a stereo input, most people wouldn't want a ping-pong output, they would rather 'preserve' whatever is unique to each L/R channel entering the delay pedal, hence the 'dual-mono' output in that particular setup with the Boss delays. Are you looking for a stereo in / out delay that will ping pong the repeats for a stereo input?
@ArrakisOCE
2 ай бұрын
@@PedalScience Hi, yes that is what I am after. It looks as though the panning mode will work with dual inputs once you set it but I guess I'll find out when it arrives. Thanks for the video.
@ArrakisOCE
2 ай бұрын
Good news for anyone in the same situation or with a stereo rig - I tested this today on my new DD-8. You can select the stereo mode as per the great video above and it does in fact pan even with stereo inputs (i.e. A and B inputs connected). This has to be the only compact pedal that does it and was the reason for my upgrade from the DD-6.
@QerstyBass
3 жыл бұрын
could you do a comparison of the panning delays with the RV-2? (it is the best panning delay ever according to Steve Kimock)
@PedalScience
3 жыл бұрын
I no longer have the RV-2, but the panning does sound quite good here kzitem.info/news/bejne/0ZVuk2usgHtym6Q
@Minimac22
2 жыл бұрын
Is the wire on the top of the pedal for a power supply cuz mine doesnt seem to work when something is plugged in to the top input
@PedalScience
2 жыл бұрын
Yes it is. Does it work on battery? Could be that your PSU is the wrong polarity or voltage is too low
@Minimac22
2 жыл бұрын
@@PedalScience so that means the power supply isnt high enough voltage?
@DSilvergun
2 жыл бұрын
DD7 to me sounds better than the 8 overall.
@54Offwall
2 жыл бұрын
Definitely. The DD7 is their best sounding delay
@McLOVIN.....
Жыл бұрын
Ni de coña
@serranodavid3247
2 жыл бұрын
Effects loop, or directly 🤔
@which1yallclickedme
Жыл бұрын
this is done with a Y-Cable?
@PedalScience
Жыл бұрын
no just two mono cables to separate inputs / amps
@McLOVIN.....
Жыл бұрын
Cuanto tiempo de retardo tiene?
@PedalScience
Жыл бұрын
most of the modes 20-800ms, 1600ms in 'long delay' mode and up to 10s in reverse mode and 40s in looper
Пікірлер: 25