thanks for not showing how you got the 4 nuts off the inside
@jokrkillah
2 жыл бұрын
12mm wobbly with a 6in extension and a whole heck of a lotta patience. I found it easier to remove the plate on the bottom of the dash to get tot the top two.
@lazarogarcia2122
5 жыл бұрын
Here it is. I'm a week behind on my youtube. Didn't get to watch the first upload. Keep up the grind.
@nobodynoone2500
2 жыл бұрын
You need a dual circuit master cylinder. Please don't use a splitter. We have had dual circuit braking since the 1950s for a very good reason.
@miguelalvarado1899
2 жыл бұрын
What year was the Toyota tundra
@corbinknight9702
5 жыл бұрын
Great vid. Even better if Jeremy was included. Without the booster, wouldn't it be harder to stop faster? Or have to apply a lot more pressure to the brake pedal?
@MrLOPRR
3 жыл бұрын
What's the divider size?
@rialto1380
4 жыл бұрын
Do you know the actual size on the splitter
@nobodynoone2500
2 жыл бұрын
Don't use a splitter, use a dual curcuit master cylinder.
@robertmartinez7675
2 жыл бұрын
What would you call that fitting you showed?
@blainebarcoe7080
5 жыл бұрын
Did I not watch this the other day?
@anthonyrowell7853
5 жыл бұрын
Nah u just been smoking too much
@Autosauce
5 жыл бұрын
Yes we had an issue with a copyrighted song, so we had to make a few adjustments. Let us know what you think!
@gabrielr6679
Жыл бұрын
Is there a way to turn it sideways?
@MrLancerowan
4 жыл бұрын
what brake master did you use?
@nobodynoone2500
2 жыл бұрын
The wrong one.
@carstuff8208
3 жыл бұрын
I don't know k swap, probably willwood master c, and a cheapo depot brake line adapt, come on man, just needed a $75 braided line adaptation from brake cylinder to proportioning valve at firewall
@urielsalas9265
5 жыл бұрын
Look guys, I know KZitem money is important... but guys could you not do the arrow deal? I am able to read the title and am also able to understand what I'm about to watch and learn. Thanks.
@Gotchalittleahhh23
3 жыл бұрын
The boy Sandoval 💪🏽
@jdsphynx3656
4 жыл бұрын
Brooo I want to do also that but I have disc all around the integra conversion how will that work for me
@nobodynoone2500
2 жыл бұрын
It will work, just takes a bit more force. Your drum style master will actually make braking easier than 4-wheel disc cars due to the smaller diameter.
@jxs_garage
5 жыл бұрын
Hows it stop
@josesalinas6710
4 жыл бұрын
Aye PFI represent💯
@jawaone2474
3 жыл бұрын
Do you know the torque specs for the 2 bolts that hold the brake master cylinder onto the booster. And 4 on the inside? Can’t find information on it anywhere?!! Thank man
@FlipSideGarage
2 жыл бұрын
Do you prebleed the master cylinder before install?
@nobodynoone2500
2 жыл бұрын
You can reuse your oem one with most kits, but yes, bench-bleed any master cylinders before install. It's not always needed but when it is it's a huge pita once its in.
Пікірлер: 29