Decided to get the brakes off today. The calipers are held by 2x15mm bolts. You need to use a 15mm socket and an 18mm wrench to take the caliper off. Once the caliper is off, pop out the brake pads. The caliper bracket is held by 2x21mm bolts. Remove them and the caliper bracket slides out. The brake rotor may be held by small clips that need to be removed from each lug-bolt. Once those are removed, slide the rotor off. The rears are a little more difficult to slide off than the front. My driver-side rotor wasn't coming off easily, so I used a rubber hammer to help push it out.
TOOLS
Makita CT225R 18V LXT Lithium-Ion Compact Cordless 2-Pc. Combo Kit
amzn.to/316i698
TEKTON 1/2 Inch Drive 6-Point Impact Socket Set (11-32mm)
amzn.to/2DpVJDq
TEKTON Ratcheting Combination Wrench Set (8-19mm)
amzn.to/31a085M
Drill Socket Adapter Set
amzn.to/39NuJdf
1/2" Drive Ratchet
amzn.to/2BPOWlZ
ABN Rubber Mallet 32 Ounce
amzn.to/31cmDGZ
--
Follow the full project on Corvette Forum
www.corvettefo...
C6 Corvette Project Playlist
• C6 Corvette Project
Connect with me on Instagram
/ car_mod_guy
Негізгі бет Brake Calipers & Rotors Removal - C6 Corvette Build - 7
No video
Пікірлер