In diesem Video stelle ich euch den ultrastarken -und brandneuen 10W Laser von Longer auf dem Ray 5 vor. Der Ray 5 kommt mit Wifi, einem Touchscreen, möglicher App-Steuerung (selbe wie beim TS2) für den offline Betrieb und vieles mehr.
Das Gerät ist aktuell in der Promo und ihr bekommt es derzeit reduziert.
Über unseren Rabatt Code erhaltet ihr nochmal 30$.
Aktuelle Aktion - wer bis 31.07 ein 10w System bestellt, bekommt ein 5 Watt Modul dazu. Zudem ein Rabatt ontop mit dem
hier folgenden Link und Code
Longer Ray 5 10W EU Version
s.zbanx.com/r/cDxlnfCUPQN9
Rabattcode R510WSAVE30
Longer Ray 5 Zubehör Paket:
s.zbanx.com/r/I49mxgBJ3XpG
Ihr druckt 3D? Hier gibt es tolles Filament zum Manbo-Vorteilspreis:
Meine Empfehlung für Filament: Bestes Material made in Germany "Material4Print" Filamente:
10% Rabatt auf das gesamte Sortiment - nutzt meinen Code: MANBO_10
www.material4print.de/?sPartn...
Solve the problem of false triggering of RAY5 flame sensor
1. Please cover the flame sensor probe with an opaque sticker (the probe looks like an LED lamp bead, on the back of the control box), test to check whether there will be a false flame alarm, if it does, go to step 2, otherwise go to step 3
2. The flame sensor is damaged, and you need to apply for after-sales replacement of the flame sensor. Before replacing the sensor, you can temporarily turn off the flame sensor function. The specific operations are as follows:
2.1 Connect lightburn/lasergrbl/serial monitor, select the correct port and baud rate (115200)
2.2 Send the command "$38=0" to turn off the flame sensor function (if you want to turn it on again, please send the command "$38=1"), the settings will be saved automatically.
3. It is necessary to adjust the trigger threshold of the flame sensor to reduce the probability of false triggering of the sensor. The specific operations are as follows:
3.1 Connect lightburn/lasergrbl/any serial monitor, select the appropriate port and baud rate (115200)
3.2 Send the command "$42=1300", 1300 is the trigger threshold, the smaller the value, the harder it is to trigger. The factory default value is 1700. The settings will be automatically saved.
3.3 Test whether it will still trigger falsely. If it still does, repeat step 3.2 and change the threshold to a smaller value until it will not trigger falsely. Please feedback the parameters to us after success.
#longer
#laserengraver
#3ddrucker
Негізгі бет Ғылым және технология Brandneu Longer Ray 5 10w Lasergravierer Krasses Teil!
Пікірлер: 26