This is why makenoise is one of the most creative designer of music devices.
@MAKEN0ISEMUSIC
Жыл бұрын
🎶⚡️🎶
@wwaynec
Жыл бұрын
I can stare at most KZitem videos, waiting for someone to get to the point. I'll need to watch this several times, with a notepad, just to absorb it all. I would dissolve into maniacal laughter here, but I might miss some of the video. Love you guys.
@MAKEN0ISEMUSIC
Жыл бұрын
Glad to hear you enjoyed it!!
@kevinaaronson
Ай бұрын
So badass, thanks Walker for taking it "too far."
@hrrld
Жыл бұрын
Guacamolly - what a delight! Impressive performance. Cheers to all involved, that put a huge smile on my face.
@MAKEN0ISEMUSIC
Жыл бұрын
⚡️🎶
@AModulationJourney
Жыл бұрын
Wow, mindblowing..going to have to watch this video a few times lol
@MAKEN0ISEMUSIC
Жыл бұрын
Have fun!!
@AModulationJourney
Жыл бұрын
@@MAKEN0ISEMUSIC always, thanks to you
@Bun_P_
Жыл бұрын
inop 1 is super cool! i wasn't aware of that prior to this video, thanks :) and omod 1 is such a great option to have, too. 🍓
@ethermod307
Жыл бұрын
What a rave! Morphogene still king. Last few minutes are absolutely mind-blowing. I'd love a full live set with this idea only.
@MAKEN0ISEMUSIC
Жыл бұрын
That sounds like fun! Live mishmashing
@Nanotopia
Жыл бұрын
Amazing! I loooove my Morphagene, Mimeo, Qpas...and just.. Make Noise is the best! Thanks again for sharing your wizardly knowledge, patch suggestions. 🥳
@MAKEN0ISEMUSIC
Жыл бұрын
⚡️🎶⚡️
@ModePhaser
Жыл бұрын
Every single video you guys post is a joyous journey! Thank you!
@MAKEN0ISEMUSIC
Жыл бұрын
Thanks for watching!! ⚡️🎶
@dj_dzak
11 ай бұрын
keep comin back to this one...
@muratti1277
Жыл бұрын
Thank you for the great videos, that inspires and always gives new incentives to try out something new.
@MAKEN0ISEMUSIC
Жыл бұрын
Happy patching!!
@muratti1277
Жыл бұрын
@@MAKEN0ISEMUSIC sure:-) anytime
@GrantGoddard
6 ай бұрын
This is insanely cool. Very impressive performance! 👏
@MAKEN0ISEMUSIC
6 ай бұрын
Thanks! Glad you enjoyed 🎶⚡️
@blush_response
Жыл бұрын
Killer stuff in here
@MAKEN0ISEMUSIC
Жыл бұрын
Thanks Joey!!
@strawmanhat
Жыл бұрын
Walker: When you get excited, I get excited. Thanks.
@MAKEN0ISEMUSIC
Жыл бұрын
You and me both! (That was one of KZitem’s suggested responses and it sounded especially appropriate/redundant 🎶⚡️🎶)
@pyrox2518
7 ай бұрын
Question here. I picked up a morphagene, Is it possible to do something about the noise floor? When everything is silence the morphagene created some soft buzzing digital noise. this happens even without input.
@chitlun
Жыл бұрын
Incredible! I just wish I could get my hands on one 😢 They’re as rare as rocking horse shit in t’ UK!
@DrMuse-on2dx
Жыл бұрын
Thanks for more very useful ideas.
@MAKEN0ISEMUSIC
Жыл бұрын
Thanks for watching! Glad you enjoyed 🎶⚡️
@Radar23
Жыл бұрын
Oh my
@zannfilm9645
Жыл бұрын
"let's hear the (glorious) mess we've made"
@MAKEN0ISEMUSIC
Жыл бұрын
😉
@edwardnixon1782
Жыл бұрын
Exstatik! Can you please clarify -- as if for newbee -- the routing going on to/from the Mult? I go back and forth among the most recent vids and see things happening that do not seem to conform with the basic in/out architecture. Or... maybe I'm just deluded. (I watched the Mult spotlight vid using the Shared System way back when; but that is straight ahead with an explicit bridge between the first and second channels. Thanks. You continue to amaze and inspire!
@MAKEN0ISEMUSIC
Жыл бұрын
Sure thing! The Mimeophon's Left and Right outputs are each multed to the respective Morphagene inputs, as well as to the Left and Right inputs on the XPO. This means that what we are hearing is the outputs of the Mimeophon, but that at the same time those outputs are feeding the Morphagene for the easy recording of these variations: Mimeophon L Out -> Mult Ch1 Mult Ch1 -> Morphagene L In Mult Ch1 -> XOH L In Mimeophon R Out -> Mult Ch2 Mult Ch2 -> Morphagene R In Mult Ch2 -> XOH R In
@MusicLandria
Жыл бұрын
That was a hoot!
@MAKEN0ISEMUSIC
Жыл бұрын
🦉 ⚡️
@telegraph_hill
11 ай бұрын
0:13 'recent fun' can someone link me to the previous video where Walker uses EoSC x 16 to sync rene with a breakbeat? thanks. I've searched, believe me.
@MAKEN0ISEMUSIC
11 ай бұрын
the video it's referring to is this one, although i'm not sure it includes the technique you mention :P kzitem.info/news/bejne/mImhrWRjmpGogH4si=PQ-3lKAFeY4QAn9V
@billcosgrave6232
Жыл бұрын
Seriously Cool!!!
@MAKEN0ISEMUSIC
Жыл бұрын
⚡️🎶😛
@terryyaki7782
Жыл бұрын
This is very cool. I'm wondering how long does it takes to Tempi to drift from Morphagene once you have removed the clock cable?
@MAKEN0ISEMUSIC
Жыл бұрын
it will eventually drift out of phase, but probably take a long time to do so. if you change gene size or varispeed then it'll go out of phase immediately of course. if you're not modulating those things at all then may as well just keep it patched :)
@BobHodgen
Жыл бұрын
Cool! Nice!
@MAKEN0ISEMUSIC
Жыл бұрын
Thanks for watching!
@colinwood9717
Жыл бұрын
How do you make a splice like the first one that perfectly loops? I remember there being some software you need to download to place precise splice markers on an audio clip, but I think it wasn't free?
@MAKEN0ISEMUSIC
Жыл бұрын
It can be done on the Morphagene itself with the Splice button. With a one-splice Reel like this you don’t need to place Splice points in software, but our preference for placing Splice points is Reaper, which is free to try with no time limit (and very reasonably priced when you are ready for it!)
@colinwood9717
Жыл бұрын
@@MAKEN0ISEMUSIC thanks for the reply! I guess what I actually meant was, if you're recording directly into the morphagene and manually pressing the rec button how would you get a perfectly looped splice (without having impeccable timing?) In other words, is it possible to "trim" a splice without using a computer to get it to loop perfectly? I guess it's probably easiest to just load the sample by dropping it onto the sd card instead of trying to record from the inputs. Maybe there's a way to do it only on the morphagene by making the gene size super small and scrubbing through to the end of the loop and hitting "splice", then deleting the new splice? Hmmmmm
@MAKEN0ISEMUSIC
Жыл бұрын
@@colinwood9717 What I do might be similar to what you are saying, I record a little extra at the beginning and end, then use Gene Size and Slide to "Zoom in" so I hit the transients at the loop points exactly. I hit Splice at these points and then remove the Splices before and after to "crop" it.
@colinwood9717
Жыл бұрын
@@MAKEN0ISEMUSIC ah cool I'll have to give that a try! Thanks!
@kenschestok9515
Жыл бұрын
how to we get one of those snazzy morphagene t -shirts? guessing I missed the boat on that one :(
@MAKEN0ISEMUSIC
Жыл бұрын
2017 release 😵
@kenschestok9515
Жыл бұрын
@@MAKEN0ISEMUSIC I was still fartin' around with my guitar pedals, a few Moog synths and my volcas then... too intimidated by modular at that point.
@nickilling
Жыл бұрын
This presumably means more Morphagenes are on their way?
@MAKEN0ISEMUSIC
Жыл бұрын
Yes, Morphagene is on the production line this week :)
@nickilling
Жыл бұрын
@@MAKEN0ISEMUSIC great news, thanks!
@daemonicflame
Жыл бұрын
Is anyone gonna comment on the emperors clothes? It’s rubbish, a mishmash of mud, an example of how to make morphagene sound like a washing machine.
@imageofsin
Жыл бұрын
That's kinda the point. Maybe I love garbage & eat all my meals out of the trash. Maybe I buy from a manufacturer named 'Make Noise' because i want to... make noise. But maybe 'music' is very subjective and the sounds in this video sound beautiful to some (or a lot) of us
Пікірлер: 60