We had the same issue and after watching your helpful video I was ready to disassemble. My wife suggested trying to lie the machine on its face or back to see if the air bubble moved out of the flow meter. I removed the drip tray , water tank, and most beans, unplugged it and tipped it forwards while holding it over the sink. I left it like that for a few seconds, and put the machine back on the counter. It worked perfectly. Maybe we were just lucky but it’s a simple enough thing to try before taking the machine apart.
@gregandtarynsplace
5 ай бұрын
That's brilliant!
@Gainesnz
5 ай бұрын
I just did what you said and it fixed mine too. Tell your wife she saved me an hour of my life so I can now drink more beer ! Thank u
@mytheclap
3 күн бұрын
Perfect guide to disassembling the machine and fixing the problem! Thank you very much. In case anyone is interested, I managed to remove the big hooks for the back with two flat heads, one pushing the hook down and the other prying the back away from the frame at the same time. Flipping of machine required.
@johnmosesman
11 ай бұрын
TRY THIS FIRST: take a syringe (I used my kids Tylenol syringe-cleaned first obviously) and push water through the opening where the water tank sits. No need to take anything off besides the tank. This fills the sensor the same way the machine does normally. I pushed some water through until it came out the front, and that fixed it.
@dnaughtin
11 ай бұрын
Incredibly helpful comment, thanks. I had tried the flushing which worked for about 24 hours, and then tried this and its been working for 3 days since... hopefully it continues. Did it work straight away for you? I inserted about 250ml (where does all that water go, it never came out anywhere), 5 second problem persisted, then I came back in an hour and its been working well ever since. Was your experience similar?
@jokwod
10 ай бұрын
Just done this using a metal straw , blowing through water (no syringe and desparate!) and it looks to have done the trick. Between this comment and the video what an absolute life saver
@johnmosesman
10 ай бұрын
I did it quite a few times until water started coming out where the drip is if it’s in place
@lenevafarm9727
10 ай бұрын
Yes! Thank you! This worked for me, so glad I didn't have to open up the machine.
@Redjedi915
10 ай бұрын
@@jokwod Hello! Can I please ask you to clarify what you mean with a metal straw? Getting pretty close to madness on my end!
@gregaddison5236
Жыл бұрын
This exact issue happened for me in the past 24hrs. I was almost ready to buy another machine as it's out of warranty, & everything I had tried to fix it failed. Then I found your video, & my son & myself tried this tonight, & woo hoo the machine is working flawlessly again. Thank you. 👍👍
@gregandtarynsplace
Жыл бұрын
Amazing! Kudos to the both of you for getting it sorted 👏
@drewjones3385
Жыл бұрын
I had the same scenario. This video possibly saved me hundreds of dollars
@shien87
4 күн бұрын
Thank you! This fixed my machine. I opened mine and the water was about 80% full, just can't believe a tiny air gap would cause the issue. Thanks again!
@gregandtarynsplace
4 күн бұрын
Well done! 👏
@cameronbrewer5364
7 ай бұрын
Video is a lifesaver. Though there was cussing, almost giving up, trying to convince my wife just to get a new one, it did work. Thank you!
@doof8757
5 ай бұрын
This saved me so much money! Great video! Only thing I’d say is the tabs are easy to not break if you shine a bright torch and just look at the way they latch, then use 2 flathead screwdrivers one to pull the tab back and the other to lever the plastic apart But this is a really helpful video thanks mate!
@xabriel-pr
7 ай бұрын
Thank you for this video. Following the steps effectively fixed my machine. I’m a bit skeptical that adding water did anything, as the machine could move water thru the system before the 3 beeps. I think what fixes it is breaking the vacuum. Regarding the clips, I found the bottom more challenging, requiring a screwdriver jammed close to the front clips, and using a flat head screwdriver to push the pins. The back panel pins were easy to me because I used the flat head screwdriver and a bit of leverage rather than using a table knife. Hope this helps the next person passing by. And again, thanks for the video!!
@jakecraddock2575
7 ай бұрын
Agreed re the breaking the vacuum. I had visible bubbles in the pipes leading up to the boilers so put the thing back together with no water in the lower system at all. It made a few disagreeable noises but sorted itself out during a descale and flush. All good now.
@robertholian921
Жыл бұрын
I've struggled with my barista pro doing this problem for ages, going through the cycles of flushing and descaling, which sometimes eventually worked. I got to breaking point with my machine this week and found your video while pulling my hair out. Although not mechanically minded *at all*, I managed to do this, and somewhat skeptically put my machine back together. I cannot thank you enough, because this has made ALL THE DIFFERENCE. It's like the machine runs smoother somehow. Thank you for legit saving me $1000 on a new machine. PS I managed to do it without breaking any clips at all lol
@JD-bz9vo
Жыл бұрын
Your comment gave me hope 😂. I was doing the same and then I got my partner to try the first fix and yep it worked. Saved ourselves $1000 on a new machine 🙏🏽💙🥳☕️
@gregandtarynsplace
Жыл бұрын
Outstanding effort Robert! 🙌 It’s great to hear that this was helpful, thanks for letting me know 🙂
@canlen1
3 ай бұрын
My machine works now-thanks. We filled the flow meter with water and put it back together. The hardest part of this process is placing the flow meter back onto the two little holding slots and also we worked from the back as we could not get the bottom cover off after undoing the 6 screws. We used little blutack to hold the very last screw (which goes inside the back cover under the holding tank)) onto the screw driver.
@carolinamenendez453
Жыл бұрын
Thank you so much for sharing! As you my machine was also out of warranty and was being charged $315 for Breville to fix. I’m so glad I found this video… my machine is back in business and working like new! Thanks again! 😊
@dmueller01
10 ай бұрын
Thanks Greg, you got me out of a spot of bother there for sure! The old Hot water trick saved me. Greatly appreciated.
@rorytoomey
6 ай бұрын
Followed this step by step and am now sitting here sipping a coffee and writing this. Thank you. Great video guide through a fiddly process.
@publicmail3637
2 ай бұрын
An air bubble had formed in the tube between the water reservoir and flow control meter. I opened the flow control meter, drained the tube, reassembled and it started working again. I didn't see any cracks or loose connections from control meter to reservoir so how the air bubble formed is a mystery. Thank you for the video! It makes it possible to actually get inside this thing without causing significant damage.
@nielstjrnhj-thomsen4088
9 ай бұрын
I have the Sage Barista Touch which is very similar and this video gave me the courage to take it apart (as well as the hint on the clips holding the back panel in place). I now have a working machine again! Saved £250 and a 10-14 day wait to have it fixed at a service centre an hour away, and took all of 1 hour all in. Awesome!
@techboy86
2 ай бұрын
Awsome video and guide, this fixed it for me, where evey other non opening up and fixing advice had failed. Thanks for posting this, was getting stressed without my morning espresso routine. 👍
@samwei51
23 күн бұрын
My machine got the exactly same issue. Your video saved my machine!!! Thank you!! What’s funny is that the same clip broke on me as well.
@MrVinhT
9 ай бұрын
Amazing, thank you for uploading! A couple extra tips/ details: - removing the bottom plate, there are four angled tabs at the front holding it in place. Takes a bit of force and angled pulls to remove. - removing the back plate, I was able to release the top edge first. This created tension along the bottom edge so when I pushed the bottom tabs with a flathead, the bottom corners popped out easily. No broken tabs. Pay special note to the video to ensure you’re releasing the correct tabs as there are a few others underneath. - repositioning the white water canister piece was tricky. Alignment of the bottom pins are key. Aim for this first and keep the piece level. Exact issue and for now, fixed. Will never remove the water jug when turning machine on again. Good luck to everyone!
@firasx14
9 ай бұрын
It worked for me, too! Thanks a lot!
@tutyfruity8317
8 ай бұрын
That worked thanks. I’m facing a b problem, the water leak from the flow meter. What should I do
@ctd_hk
8 ай бұрын
What do you mean by not removing the water jug when turning the machine on?
@NDCArchitecture
7 ай бұрын
Brilliant video - thank you so much - saved me a £100 - also thanks for all the warnings, managed to get all the covers off without breaking any clips, the air bubble was at the top of the pipe, had to turn the whole mashine up side down, watched the bubble go all the way back and out!! Brilliant!
@gregandtarynsplace
7 ай бұрын
Nice work! 👏
@audreyb221
2 ай бұрын
Another video by CY in Singapore suggested clearing the bubble by running the steam wand into a cup of water for awhile instead of taking apart the whole machine and it worked without all the work.
@magaloe
2 ай бұрын
Thank you *SO* much! I was about to take my machine apart and you saved me from that arduous task. Kudos to you! The steam wand trick worked! 😊
@silv3rbl4d3s1
2 ай бұрын
This worked for me too! Thanks ALOT!
@RubySami23
Ай бұрын
This just worked for me! Thank you!! I was not about to take apart my machine
@Sam-zy5ck
26 күн бұрын
I wish this worked for me. Wand turns off after 6 pumps. I tried switching wand on and off each time but it didn't work.
@catherinesmith5819
Күн бұрын
Another thing that you can try is tipping the machine upside down for at least 10 seconds. I’ve done this before and it worked first go. yesterday I had to do it again (after the machine had been working fine for many months) and it took 4 or 5 goes. Also trying over and over to flush the machine, which of course works properly once the air bubble has moved.
@thomasnyborg3525
3 ай бұрын
Very helpful video, saved me a 2 week wait for repair, thanks. At 3:22 to avoid leaking from flowmeter, place o-ring/seal in top-part when assembling, took me a couple of disassemblies to get right 😊
@SahelAlfateh
10 ай бұрын
Thank you for this video! My Breville is back in action after a year of collecting dust. I tried various descaling tricks and resets, but nothing worked. The Barista service center in my country is 170 miles away, and I can't afford the time and money to go there (costing about $100-120 USD). Following your steps, especially the syringe trick to prevent bubbles in the flow meter, was the key. After doing the shot, I noticed a leak from my faulty flow meter, causing the bubble issue. I purchased a new $26 flow meter, installed it three days ago, and now I can successfully pull shots, descale, and flush. I'm thrilled because your video is the only one that addressed all my problems. It seems flow meter issues like bubbles, leaks, and magnetic problems are common in the Breville Barista Pro. P.S.: Dealing with that fiddly part during disassembly tested my patience, especially the first time! 😂
@gregandtarynsplace
9 ай бұрын
That is great to hear!! Great work identifying the flow meter issue and replacing it as well - awesome job!
@yifanli5652
9 ай бұрын
thank you so much for this detailed video save me a trip to sending my coffee’s machine to repair just before christmas. now the machine back on duty. ❤❤❤
@philipsiebenlist2165
Жыл бұрын
Great fix. My Barista Pro is back in action. Saved over $800 on buying a new one. Amazon had the replacement flow meter. Only busted one clip on the bottom but you would never know it once it was back assembled. Thanks!
@gregandtarynsplace
Жыл бұрын
That’s brilliant - nice work 🥳☕️
@brianwatson7082
11 ай бұрын
This worked a treat and saved $150 service fee, thanks. Sorted issue. Managed to get base clips off without breaking off and without taking top of machine off. Not breaking clips was a slow and steady side to side process. Nice and easy!
@gregandtarynsplace
11 ай бұрын
Nice work!
@LM-iq8pp
Жыл бұрын
This worked like a charm, as many others have suggested. You've saved so many ppl's morning routine (and money), mate! Three tips from my go: 1. the bottom plate was harder for me to remove. Def go from the back, as there are four clips at the front - ended up breaking one but not the end of the world 2. the back plate only has two clips, so if you wedge them at the same time they came off quite easily. 3. that white part was def the most fidgety part - make sure you move other cables aside first and that your orientation is right Thanks again!
@gregandtarynsplace
Жыл бұрын
Great job getting it done yourself and thanks for sharing some tips!
@timhjort8727
Жыл бұрын
Thank you for this video. I have had this happen a couple of times and last time was able to push water through to break the airlock without taking it apart. I had to take it apart as the video describes and this fixed it. I blew out all the lines and also made sure all the parts in working order. Now cross my fingers that it will last for some time. You saved the day!
@gregandtarynsplace
Жыл бұрын
Great work! 👏
@hongyanan645
11 ай бұрын
I had the same problem. Force descaling did not work for me and I am afraid of opening up the machine. So at the end, i fixed this problem by manual extractions with the flushing disc inside. Prepare the way of flushing, but instead of press flushing, I kept doing manual extraction. It fixed my machine 🎉🎉🎉
@justinreeves8336
5 ай бұрын
Just fixed mine following your exact instructions. Now works so thank you very much. Seriously though, anyone in the market for a coffee machine should look elsewhere. Great coffee out of these for sure, but I have gone through 3 in 5 years. Zero reliability.
@Weareinforit
7 ай бұрын
Dude .. thank you .. I was completely broken this morning when this happened .. first video i saw .. tried the hot water recommendation ..worked like a charm Thank you again
@gregandtarynsplace
7 ай бұрын
Getting it sorted by just running hot water is a win!
@jakecraddock2575
7 ай бұрын
Hey dude! Enormous thanks and mega-props for this video. Been sittin on a busted machine with this problem for too long. An excellent video which captures everything I needed to know. Saw some air bubbles in the pipes, so additionally I disconnected them from the spinny valve wotsit to clear that. Anyway you gave me the confidence to have a crack and I'm so glad I did. AWESOME. PEACE!
@catherinesmith5819
4 ай бұрын
I just followed the instructions about tipping the machine upside down for a few seconds and it is working again. Worth a try before pulling the whole machine apart..
@BayuNuswantoro
2 ай бұрын
Works like magic! I took out the coffee beans tray, water tank, and drip tray, then left the coffee machine upside down for about a minute. I lifted it and gently shook it before placing the trays and the water tank back. Steamer and extraction back to normal, no more stopping at 5 seconds! 100% worth trying before opening it. I still don't know if this issue will come back (hopefully not). 🤞 Let me (us) know if anyone tried this and worked too. I just want to see if this could be the easiest way to resolve the problem.
@chrisgarner8578
21 күн бұрын
@@BayuNuswantoro Same worked for me - thanks for this tip! Saved me inevitably breaking clips 🤣
@ThePyrula
19 күн бұрын
thank you for this, it helped me as well
@nathanscott3995
Жыл бұрын
This problem ruined my sunday morning ritual but this worked after about an 45mins of trying to dismantle this damn machine lol. Thank you
@gregandtarynsplace
Жыл бұрын
Great work! And you saved yourself a trip to the repairer 🥳
@rainnerdias4664
Жыл бұрын
Mate, just want to thank you and shouldn’t be enough tho! Just follow your instructions and was able to solve this pain that I had for a few months!! I really appreciate!! ❤
@gregandtarynsplace
Жыл бұрын
Awesome to hear! Great job getting it sorted yourself 👍
@jaspnz
5 ай бұрын
Had my machine ready to take to the tip but thanks to this video I may have extended its life. Much appreciated
@gregandtarynsplace
5 ай бұрын
That’s a win - great job! 🙌
@JD-bz9vo
Жыл бұрын
Thank you sooooo much!!!! We had this issue and put our machine in for a service and they couldn’t find the fault. Machine came back and was working okay then the same issue happened again. Anyways, I’ve been so frustrated about it and decided to search on here for tips and THANKGOD I found your upload because the first fix worked. If it happens again then I’ll get my partner to do the second fix. Cheers 🥳🍻 🇦🇺
@gregandtarynsplace
Жыл бұрын
Gotta love a quick fix! That’s great to hear the first option worked, even if it’s just for now 😁
@NutritionChannel-t4s
10 ай бұрын
100% works. I also got a little syringe (oral medicine syringe) and pushed water into the system from the water tank pipe and waited till the water rose to the surface so no air bubbles would be in there at all. This is just me being ocd though. Make sure you 100% click the little connector cord back, cos I mustn't have pressed mine in correct the first time and had to reopen the machine. Don't be silly like me, lol. 😂
@SahelAlfateh
10 ай бұрын
Hai. Can u specify which part you use your syringe? Is it before dissamble?
@graydoggreta
8 ай бұрын
Thank you! We tried this today and it appears to have worked. I’m so grateful!
@תומרפרץ-ו3ע
9 ай бұрын
Did it, works like magic!!!! Thanks so much. Must add that the base of the rotor is different looking in my machine....
@jcaceresy
11 ай бұрын
Thank you for posting this video, my barista is working fine again (and if it stops I will just replace the part which is quite cheap compared to a service)... I managed to remove the base without breaking the clips by using some plastic tools commonly used to open mobile phones ;)
@gregandtarynsplace
11 ай бұрын
Ah that’s a good tip - thanks for sharing!
@shayerjaleel
5 ай бұрын
Followed this same procedure to fix my Barista Pro. Thanks a lot.
@loficutoff
Ай бұрын
Thanks I would have never worked out this was the issue with my machine without this video
@felixwang7126
Ай бұрын
Really thank you for this video. Followed the instruction and pour water into the meter to push the air bubbles fully out the pipe. Then everything returns normal. Appreciate!
@Redjedi915
10 ай бұрын
Absolute legend!! I’ve had this playing up for a couple of months which has been driving me up the wall, I tried this yesterday and so far so good. Thank you so, so much for sharing this info in a really digestible way! I don’t have any tips to share other than I tried the alternative fixes that people have recommended, and they didn’t work - if anyone is doubting trying this, it really isn’t too difficult to fix if you’re patient. Again, thank you so much.
@casper20056
2 ай бұрын
Thank you for the detailed instructions. It was very helpful to fix the issue with the machine.
@mettemunknielsen587
9 ай бұрын
Thanks for the detailed video! Made it simple for me to fix my machine - it's now working again just in time for the weekend :)
@Speckled10
Жыл бұрын
Thanks a MILLIION (or more precisely A$300 repair quote) for this awesome video !!! It looks like it's fixed ours and I even managed not to break any clips but I tell you putting that #$@#$ flow meter back in was an absolute bee !!! Also can I recommend everyone get a small plastic syringe (you can actually ask for them for free at chemists) which helps pump water back through the hoses from the tank hole to refill after you have disassembled .. again thanks so much mate you're a legend !!
@gregandtarynsplace
Жыл бұрын
😆 yes that flow meter is not much fun! Great job getting it done yourself 👏
@nzSkitzo
8 ай бұрын
I want to add my 2c that I had this issue and also resolved by filling tank with descaler and pressing the 2 cup button 1000 times until it finally got past the 5 second mark and then it has working fine ever since.
@SuperMadeeha
Ай бұрын
You saved our coffee machine. Thank you so much ever so grateful ❤
@gregandtarynsplace
Ай бұрын
Great work getting it fixed!
@AlanMenhennet
5 ай бұрын
Thanks mate, I was stumped, I was trying to brew with no luck, but trying the hot water setting worked
@stephanair9380
Жыл бұрын
Such a great video! I managed to repair my machine even without breaking any clips. Thank you so much for sharing! I tried to buy you a coffee but didn't work 😢
@gregandtarynsplace
Жыл бұрын
Great work! Thanks so much for trying and your feedback. I've now changed it to PayPal as I think that will be easier. Great to hear you saved some time and $$$! 🥳
@mlrealtor
6 ай бұрын
From what I see many of us have this problem recently, I believe that the Barista Pro was defective from the line, my girlfriend has the simplest Breville model, she has 5 years with it and has not given her problems, I bought almost two years ago the Barista and today I woke up with this problem.
@gregandtarynsplace
6 ай бұрын
I’ve got to agree - the fact this one video has 27,000 views in 12 months implies it’s a pretty common problem! Which I’m glad hasn’t happened to mine again since making this vid!
@stickypages
11 ай бұрын
Crazy that this works! Great video, solid instruction and easy to follow.
@ElviaRodriguez-lw9ud
Жыл бұрын
Awesome video with very detailed instructions. I followed the instructions step by step, and I was able to fixed my barista pro.
@gregandtarynsplace
Жыл бұрын
That’s fantastic - great job!! 🙌
@umariza
7 ай бұрын
Thanks so much. Nice to know what causes it. Hot water trick worked for me after 25 goes. I was doing it for one last time having just vacuumed out the beans and it just carried on putting out water.
@GoofiTroofi2
Жыл бұрын
Thaaaaaaank you!!!!! You’ve saved my life! You’ve made my day! I’m absolutely happy!Lots of greetings from Germany. Have a great day!
@JaKrish
9 ай бұрын
Woo! Your video saved Christmas! Haha. I somehow didn't even break the two tabs you warned would likely break! The HARDEST part by far was re-seeding the little pump thing. Trying to set in place was very difficult with that MESS of wires you have to work through. I helped solve that by using a twist-tie to keep all the wires together, then strapping them out of the way with another twist tie. But even then, it felt like I got lucky when the thing clicked in place. Not sure what filling the devil device up with water does, but it worked! My only fear now, is it happening again! But thank you for your video! NOTE: I did not remove the bottom, as you said it was only an option.
@gregandtarynsplace
9 ай бұрын
🥳 great work getting it sorted in time for Christmas and thanks for sharing some tips!
@IngaBlake-f3d
10 ай бұрын
Thanks for this. But I was able to resolve by: 1. taking water tank off, blowing down the black plastic water seal at back of the machine where water tank joins onto (no idea if this actually helped clear any water lock) 2. poured some extra water into the black water seal, slammed water tank down back into place, some bubbles came up 3. let the hot water run through for 20 seconds or so, whilst shaking the machine a bit like a mad man 3. repeated step 1-3 a couple of times Slightly crazy approach but involved no disassembly :D
@gregandtarynsplace
9 ай бұрын
😆 now that would make for an interesting video! Great to hear that you've got it fixed 👏
@bolbol-zu9ks
7 ай бұрын
Awesome!! I had exactly the same problem. Really good explanation and step by step guide.
@lkj17
7 ай бұрын
Bro. You saved my life😢 that works. Thank you so much.
@asanlidev
2 ай бұрын
I cannot believe it… I have Barista Express. It used to be like this for over a year now. Extracting for 2 seconds and just stops. I opened up the machine (make sure to empty all coffee beforehand) and found the white plastic thingy. I couldn’t get it out so I twisted its cap at its place and it just opened up. It was filled about 70%. I used a plastic pipette to fill the rest. As it filled a bubble raised up the pipe. I didn’t bother with it. Just replaced the plastic ring and closed the cap. When I ran the machine I instantly noticed the difference in sound it makes. Extraction took about 15 seconds I guess and coffee coming out was so smooth. I can’t believe how 5ml water changed everything. Thank you so much it used to bother me a lot.
@gregandtarynsplace
2 ай бұрын
Hey nice work! 👏
@kronixhitz
10 ай бұрын
You sir are a life saver, this was an excellent guide.
@drewmce
4 ай бұрын
Holy cow. This worked for me on my Barista Touch. Thank you 🙌🏼 Atleast it's working today 😄
@kdd.9724
6 ай бұрын
Thank you!! Thank you! Detailed, step by step guide. Worked! (And what the hell Breville!!? Obviously this happens a lot. 28,000 views! Change the design on this expensive machine!)
@williamhunthrop1918
8 ай бұрын
You saved me 8 or 9 hundred dollars. Thanks!
@sherryk5008
7 ай бұрын
Thanks. Very fiddly but thankfully it resolved my issue after a second attempt.
@petefab23
14 күн бұрын
Thank you sir! The hot water trick fixed my issue
@fffggg103
9 ай бұрын
Thank you for sharing the video! It fixed the problem on my machine.
@sheilasitaram3788
5 ай бұрын
You absolutely saved me, thank you so much for this video.
@jamesb1412
28 күн бұрын
Very nicely done sir!🫡
@jonathankeefe7178
Жыл бұрын
Thank you so much. Didn’t have an air bubble. A small piece of plastic in the pump. Not sure how it got there. Managed not to break anything in the process.
@gregandtarynsplace
Жыл бұрын
Nice work!! 🙌 It must have got sucked through from the water reservoir, I wonder if a piece from the water filter holder has broken? Awesome effort saving yourself some $$$ and time at the repairer 👌
@catherinesmith5819
6 ай бұрын
Our machine had this exact problem and we were a little terrified at the prospect of pulling the whole machine apart. I happened to see a comment somewhere that sometimes the machine might need descaling. We did this- had to persevere many times before water would go through, and then had to descale twice more before the problem was solved.
@eraldway
6 ай бұрын
Did this. It worked for a week and the issue started again.
@dskordo
Жыл бұрын
Thank you. Worked like a charm.
@m7md1989
Жыл бұрын
Thank you so much, I really appreciate you for this learning it was really helpful كانت عندي نفس المشكلة اللي بالفيديو وسويت نفس طريقته والحمدلله ضبط الاستخلاص
@gregandtarynsplace
Жыл бұрын
Great to hear - nice work getting it sorted out!
@rogeradams3277
Жыл бұрын
When reinstalling the flow meter: if you remove the screw on the back left base of the machine, the whole flow meter mount can be swung out allowing easy access! Makes it easy as!
@gregandtarynsplace
Жыл бұрын
Legend - great tip!
@patricioarias8395
28 күн бұрын
This is actually very helpful
@geoffpage3372
Жыл бұрын
Legend...worked a charm. Thank you.
@DingusGoesWest
5 ай бұрын
I had the same issue and fixed it by turning the whole machine upside-down and giving it a jiggle. Make sure you remove the tank, drip tray and bean hopper first though! 😅
@jacksonfrancis5367
Жыл бұрын
Does anybody have any idea where I could purchase that replacement part if the magnet is going out? I used this fix and it worked for about a month or two, but I am having the same issue again. I am thinking it could be the magnet.
@acreage-diy
5 ай бұрын
Great video, I changed my flow meter in a few minutes after watching this and didn’t break any tabs either. Unfortunately this did not fix the problem. Any more ideas?
@ערןקורן-ק5ל
7 ай бұрын
Wow thanks for the video, how can I know if I had the same problem, my machine doesn’t get out water at all…?
@palg101
10 ай бұрын
Great video! Very detailed, worked great! Thanks.
@panagno1
4 ай бұрын
I did what Greg suggested but now I am getting a Fill Tank error even when I fill my tank. The magnetic float works so any ideas?
@JonathanStanton
5 ай бұрын
Thank you! You just saved me hundreds of dollars!!!!
@Benethor
Жыл бұрын
Tried it, the hard part wasnt getting of the sides, but the bottom. That took me like 10 minutes, the sides were easy after that. My flowmeter was filled and not stuck. After assembling at again it works again, but it did so ocasionally before, so i cant judge it yet. But after the reassembling the second extraction phase makes a weird rattling noise. I guess something is not at the place it has been before, maybe some of those plastic wire caps? Any ideas?
@nigeleyeit
11 ай бұрын
Great video thanks. i had this issue and ran though it, it worked for a while but stopped again, i found the seal on the flow meter must leak a bit air gets sucked in? I lubed mine with some Vaseline and so far so good.
@gregandtarynsplace
11 ай бұрын
Great tip - thanks for sharing it!
@SuperBotcreator
9 ай бұрын
After trying all the tricks down here in the comments, I ended up having to do this - but I only removed the bottom then the back, not the top. When you're handling those clips, a long and small flat head can be used to push them out of the latch. Although, I noticed that from my trial attempts some water had come out along the base of the machine (very small amounts) so I suspected a leak. This fix did work, and I was able to get the machine running! A week after doing this, my GFCI outlet trips while the machine is ending a double cup cycle. Cracked it open after ensuring it wasn't just drawing too much power and it wasn't the outlet, and spotted condensation all over the inside of the machine - water drops were visible everywhere. Honestly wondering if air got in the system through a leak that is now making itself very obvious. Either way, this causes 3 dual outlets on a wall of my home to have power cut as I think it's shorting.. So this machine will remain opened up until I find out where the leak is coming from. I appreciate the video.
@SuperBotcreator
9 ай бұрын
Adding more here, at the top of the machine, the thermo-jet coil on the left was spewing water everywhere when running. It was the elbow connector on the left. If you’re having a similar issue, Google part number “SP0100073”. Replacing the clamp, elbow and ring worked well. Note the accessory tray behind your drip tray should not have water getting into it, this can be an easy sign of a leak.
@gregandtarynsplace
Жыл бұрын
paypal.me/gregandtarynsplace If you've found this helpful and would like to pay it forward, contribute to the channel or buy my daughter a babyccino - you can now shout me a coffee! And thanks to those who have commented below - I'm stoked that you've saved yourselves a lot of time (and money!). Great work 👏
@Dee.911
11 ай бұрын
Thanks for your video 👍 after trying the hot water rinse I smacked the sides of it and it worked fine again 😂
@gregandtarynsplace
11 ай бұрын
😂 that would make for a much shorter video!
@patricioarias8395
Ай бұрын
I have the same issue and just tried this 2 times and still cant fix the issue. Even filled up the tube between the meter and the water tank and nothing. Kind of feeling like im hitting a dead end.
@sambulls
24 күн бұрын
I have the same issue, do you have any updates?
@thomashanan1996
Жыл бұрын
That coffee looked real good!
@dmtycn
4 ай бұрын
My BES880 stop every 3 seconds, clean and decale is the same. I just open the machine and open the flow meter, put back and it works now. Bought a new meter from Amazon in case it stop again.
@susanmarchinton9554
11 ай бұрын
Same issue as everyone here...the 5 second thing... Went through this whole process... Bit of fiddling around getting it apart... but the wiring part, I found relatively simple... Clicked it all back in place, put all the screws back... and..... now machine wont turn on...................... Before taking it apart again.... what could I have missed or dislodged or not put back properly.... ??? TIA....Victoria Australia.
@osamaalharbi7090
4 ай бұрын
Im facung same issue. Followed the video fixed it. Tried it before putting back everything together it was working great. Assemled everything back together now it wont turn on. All wiring seems fine I hear low electric hissing noise but yet, wont work. Any thoughts?
@ibrahima2954
5 ай бұрын
I have brand new machine that is not pumping water any idea on how to solve??
@fernanzgz
Жыл бұрын
Thanks a lot for this helpful guide! My meter was not spinning freely when pushing with the finger, so I cleaned it and then it could spin perfectly. Unfortunately this didn't help, my machine keeps stopping after 5 seconds and it feels like the valve isn't getting water (air bubble sound)
@gregandtarynsplace
Жыл бұрын
I wonder if the valve in the tank is stuck? If you push it up from underneath, water should run out of it. And if you pour water down the part the water tank plugs in to, it should spin that meter when you have it disassembled. Otherwise I have read that leaving descaler in the system for a while can help. But I hope you do get it resolved, you’ve put a fair bit of time in already!
@fernanzgz
Жыл бұрын
@@gregandtarynsplacedidn't try until now, the thing is that whenever the machine stops, I can run another shot and it will release water until it stops. This means that the valve at the bottom of the water tank should be working just fine, otherwise it wouldn't push the water from the tank.
@79vit
Ай бұрын
Can you tell me where did you get that part with magnet?
@stevehuk902
11 ай бұрын
I was dumb enough to follow brevilles instructions for descalling the machine and now i know what ill be doing this weekend...
@gregandtarynsplace
11 ай бұрын
I hope it went well!
@natk8805
11 ай бұрын
How do you descale it now? I got this problem after having machine for only 2.5 yrs:(
@dochnee1498
10 ай бұрын
At first there was only a minimal amount of water coming out of the group head or the steam wand, but it stopped after 5 seconds. I couldnt start the descaling process. Then I tried to get descaling fluid into the system by activating the brewing process but by now there is no waterflow anywhere. Neither the group head or the wand is even getting wet. The sound the machine makes when switching on or dialing in a shot is very different from before. Its way louder and sounds like its stuffed or so. Hard to explain.
@Redjedi915
10 ай бұрын
I am far from an expert, but if there’s no water than it sounds to me like this video isn’t for you. This is for the flow meter inaccurately reporting something due to an airlock, but if there is genuinely no water it sounds to me like it might be more likely to do with the pump
@TomJackman-u4g
7 ай бұрын
Excellent vid thanks mate. Worked on mine. Cheers.
Пікірлер: 229