Proper tuition. Simple but affective levelling technique. Just subscribed, looking forward to more good stuff.
@BuildingwithBudd
Жыл бұрын
Cheers Paul, many thanks for watching 👍😀
@tommyb5244
Жыл бұрын
I’ve been doing bricklaying for 5 years now. Wish I could have been taught by a older like you. I’ve Learnt most stuff of KZitemrs
@BuildingwithBudd
Жыл бұрын
Cheers for watching 👍👍🧱
@Dipzee
Жыл бұрын
People might take the piss when u say that but I’m the same, ex hoddy on the trowel learn more alot off KZitem lol
@BuildingwithBudd
Жыл бұрын
Good on you go for it 👍👍
@OiOiGeordieLEW
Жыл бұрын
Budd, quality work as always my brother. Keep it up boss man. Big G coming on canny👍💪
@BuildingwithBudd
Жыл бұрын
Cheers Lewis many thanks for watching 👏👏👍🧱
@tsango1972
Ай бұрын
Nice demo of transferring height to start
@sheridandyer4840
Жыл бұрын
Bud proper old school I learned like this but have moved on to profile and trench block. But you have made my month keep it up pall god bless you
@BuildingwithBudd
Жыл бұрын
Cheers Sheridan , I thought I would put it out how it used to done, I’m classed as an old school dinosaur 😂😂 appreciate you watching, 👍👍
@hotpoker4212
Жыл бұрын
Love your videos,Bud, old school, but good school, from a fellow brickie on The Emerald Isle,🇨🇮🇨🇮
@BuildingwithBudd
Жыл бұрын
Thanks Hot poker much appreciated 👍👍🧱
@paulgumbley4868
Жыл бұрын
When I started, it was all LBC (commons) in the footings, and galvanised fish tale ties, oh , and 9inch solid concrete solid blocks, Happy days 🤣🤣. Due to retire December ,reached the magic 66, going part time, would probably seize up if I stopped. Enjoyed the video 👍
@BuildingwithBudd
Жыл бұрын
Those galvanised fish ties are nasty, I’ve my head on them a few times 🤦♂️, 9 inch concrete blocks are gut busters, enjoy retirement, I think you have to do something though , and I don’t working fit notes , I’ve heard vicious rumours that this can happen when you retire 😂😂, cheers for watching 👍👍
@todbob6229
Жыл бұрын
Ooooo! I see your tusking the corners fella. My Forman wouldn’t allow that. Great video.
@BuildingwithBudd
Жыл бұрын
Tod, I have to put my hands up and say I don’t know what tusking the corners means, many thanks for watching 👍👍🧱
@Hugo-ke6ro
Жыл бұрын
Sehr gute Arbeit , es macht Spaß euch zuzuschauen .🙋♂️
@BuildingwithBudd
Жыл бұрын
Hugo many thanks for watching 👍👍🧱
@lmilne4859
Жыл бұрын
Rocking on budd 🤟
@BuildingwithBudd
Жыл бұрын
👍👍
@johncronin1082
Жыл бұрын
Enjoyed watching that 👍☘☘
@BuildingwithBudd
Жыл бұрын
Many thanks for watching 👍
@westhamaremassivee
Жыл бұрын
Hello bud, what do you use to get each corner inline with each other? Would love a reply! Cheers
@BuildingwithBudd
Жыл бұрын
Before I build any corners , I set up profiles as to where the building will sit, I then use those as my guide for digging out the footings and for the brickwork as well, hope that answers your question, on the video that’s the line I am levelling down from, many thanks for watching 🧱🧱
@Doug....
Жыл бұрын
Impressive way to transfer levels Budd 👍👍👍
@BuildingwithBudd
Жыл бұрын
Doug how are you fella, I’ve been transferring that way for years boi 👍
@Doug....
Жыл бұрын
@@BuildingwithBudd Hi boss. Good thanks. As an engineer i found that method fascinating and so simple. People think bricklaying is just a matter of sticking one on top of another. How wrong are they! 👍👍
@BuildingwithBudd
Жыл бұрын
Your right there Doug, that’s the easy bit, it’s all the Prep to get to that point, 👍👍🧱
@benburrows1226
Жыл бұрын
Even in fast forward its slow and painful 🤣
@x333tdc4
Жыл бұрын
Bloody back breaking but Looks good mate! Out of curiosity, How comes the footings we’re so low?
@BuildingwithBudd
Жыл бұрын
Footings we’re really deep so split the difference, but it’s not all bad gave the camera man a chance to get on the trowel without doing any damage, cheers for watching 👍👍🧱
@thunderstorm6616
Жыл бұрын
The back breaking is only on a certain hight
@jackrussell9811
Жыл бұрын
where ya been boi ,nearly 2 weeks to get out of that corner allways good to see a new vid 😊
@BuildingwithBudd
Жыл бұрын
Hello Jack, I’m slowing down now , I’m an old timer, or so they tell , but the trouble is they still need the old timers, so I play up a bit well quite a lot really 😀😀, have you laid any lately? Keep troshing boi 😀👍
@jackrussell9811
Жыл бұрын
only when the body allows ,shame with the rates they are paying on site now ,watching these young blokes on you tube we old geezers are the best , havnt heard fuck all from morrissy lately hes gone proper miserable not even a phone call
@Stonerestorationsoutheast
Жыл бұрын
I see the labourer has caught up with Bud speed 😂
@BuildingwithBudd
Жыл бұрын
🤦♂️👍🧱
@outlaw1340
Жыл бұрын
Brick or block it still works ..well done
@BuildingwithBudd
Жыл бұрын
Outlaw60 your spot on there is no right way or wrong way, this way works for me, many thanks for watching 👍👍🧱
@arniemullin9842
Жыл бұрын
How come you do it all in bricks? Could you not of used block or trench to get you to ground level?
@BuildingwithBudd
Жыл бұрын
Could have , but I just find it easier to do, it just works for me, many thanks for watching 👍👍🧱
@brentsmith5647
Жыл бұрын
Brilliant video thank you 😎👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
@BuildingwithBudd
Жыл бұрын
Cheers Brent many thanks for watching 👏👏👍
@viankalobosvalenzuela7456
Жыл бұрын
Excelente trabajo 💯 👊 🧱👏💪👌🏻
@BuildingwithBudd
Жыл бұрын
Thank you Vianka 👏👏🧱👍
@brendanmcgivern531
Жыл бұрын
Like it old school 👍👍 just like me
@BuildingwithBudd
Жыл бұрын
Brendan old school is the best school, all the best from old Norfolk 👍👏
@brentsmith5647
Жыл бұрын
Brilliant people ❤️👍😎👍
@BuildingwithBudd
Жыл бұрын
Many thanks for watching 👍
@ramhomes9074
Жыл бұрын
Could of done with a few more meters of concrete in that footing and a few concrete blocks
@richardjones3112
Жыл бұрын
Are they engineering bricks you use in footings?
@BuildingwithBudd
Жыл бұрын
Not on these ones, to be fair in forty years never been asked to use engineering bricks below DPC , must be a regional thing, we are in deepest darkest Norfolk 😂😂👍
@richardjones3112
Жыл бұрын
@@BuildingwithBudd Thanks mate.Love your videos keep them coming.
@pranotostb
Жыл бұрын
Mantab pasang bata merah good
@theessexhunter1305
Жыл бұрын
Dad used to say abt footings. Head down Arse up lol
@BuildingwithBudd
Жыл бұрын
And a bad back, cheers for watching 👍👍
@stevyg4549
10 күн бұрын
Wouldn’t it be easier to use blocks and quicker just below ground level
@BuildingwithBudd
10 күн бұрын
It would have been, but I just wanted to revisit my youth and show how we used to do it, cheers for watching 🧱👍
@rossilfc8970
Жыл бұрын
Get a gauge tape saves so much messing
@moeenahmed6853
Жыл бұрын
Hi do you do work in the west Yorkshire area.
@BuildingwithBudd
Жыл бұрын
Unfortunately we don’t go that far, we are old Norfolk bois 👍
@andrewbirch893
Жыл бұрын
Where in West Yorkshire r U and what is it U want building?
@moeenahmed6853
Жыл бұрын
@@andrewbirch893 a retaining wall. I'm calling from dewsbury. How about you?
@andrewbirch893
Жыл бұрын
How long is wall U wanting roughly? I'm in Cleckheaton so few miles from U,give me your number or something, I contact U and arrange 2 meet and U can show me where U want it 2 go then I can work out a price yeah?
@scoyle1750
Жыл бұрын
Why not use trench blocks or build two skins using concrete blockwork below ground or are you really old school coming out of ground with brickwork although bricks might be lighter when your getting on a bit
@BuildingwithBudd
Жыл бұрын
I’m just sick of lugging blocks around in footings, I just find it easier to do it this way, just a personal thing, when on out on a job anywhere and someone wants to pay to do it in block work then I will, appreciate you watching, 👍👊🧱
@scoyle1750
Жыл бұрын
@@BuildingwithBudd fair enough we all have our own ways👍
@wayneurch5545
Жыл бұрын
Looking at ground level why do all in bricks ???
@BuildingwithBudd
Жыл бұрын
Wayne because I can that simple, I’m old and find it easier doing it in brick work, cheers for watching 👍👍🧱
@johnwicks579
Жыл бұрын
Budd get your shorts back on they cheer the country up
@BuildingwithBudd
Жыл бұрын
John it’s to cold , nearly time for long Johns 😂🧱👍
@mrdogger2010
Жыл бұрын
WHY on earth are you using poxy LBC bricks below ground ????
@BuildingwithBudd
Жыл бұрын
Because I can
@muaathismail3470
Жыл бұрын
Where's your brick force?
@robogamer5384
Жыл бұрын
Worked in the building trade for 50 years never put facings bricks off a slab surprised nhbc passed this,this will not be allowed on a large site
@eddieharding2432
Жыл бұрын
Bud I love you ! But come back in10 years ! Then you will be able to teach........maybe!
@juliansaunders6163
Жыл бұрын
very nice wouldn't use LBC brick in a footing though
@chriscave7246
Жыл бұрын
Best place for LBC s are in a crusher for hardcore
@antonjones3753
Жыл бұрын
Why didn't you just tape it out for your bond ?
@BuildingwithBudd
Жыл бұрын
I don’t tape out at that point because bricks very so much in size , I rather lay them out, guess I’m just stuck in my ways, but it works for me, appreciate you watching and comments 👍👍
@antonjones3753
Жыл бұрын
Bot knocking you mate it's interesting watching your videos I work in footing on site and never seen them done with bricks.
@BuildingwithBudd
Жыл бұрын
It’s only in the last few years that trench blocks turned, that’s the future I get that, we always used to use concrete 4 inch blocks, I just don’t want to lift them anymore 👍👍🧱
@antonjones3753
Жыл бұрын
Fair enough anyway I enjoy watching your videos mate keep it up
@BuildingwithBudd
Жыл бұрын
👍👍
@johnhanley7567
Жыл бұрын
Why not using blocks
@BuildingwithBudd
Жыл бұрын
I can’t lift them 👍
@juliansaunders6163
Жыл бұрын
my bad it not lbc
@jenniferthomson849
Жыл бұрын
Bricklayer should be getting $10 a brick every one else is making hundreds of thousands of dollars and the poor brick layer laying for free to work like a ffff slave. Every stop laying bricks then U can ask what U like but no they keep working for free 80 cents a brick is for free
@garysimpson5738
Жыл бұрын
The bricks are upside down !!! Mad its block in footing or bring it up with concrete is faster cheaper . What about engineering brick under dam course... but bricks are upside down unbelievable...
@Olbol288
Жыл бұрын
Terrible job no trench or engineering
@stevyg4549
10 күн бұрын
You don’t need lasers unless it’s a bigger area to be honest reverse levelling is accurate. Any discrepancy when reverse levelling with straightedge or not cancels it out. Just like the old water level you could use with a profile the first corner you built use that and move water level to each corner and mark including existing walls.
@thunderstorm6616
Жыл бұрын
Why don't you just set up profiles much easier then setting up corners like that and where is your brick force mate
Пікірлер: 96