Thanks for making this video. My exact same kit arrived today and the instructions are very poor. Even the linked videos don't accurately describe how to install this.
@TheTeslaTours
8 ай бұрын
Thanks for watching. I’m glad it helped!
@F4FIGHT
10 ай бұрын
Love it's simplicity, would be nice if it had strips for the doors too. Thanks for sharing the fitting process.
@MacRobeson
10 ай бұрын
Do they stay powered 24/7? Or do you have to manually turn them off with the app?
@TheTeslaTours
10 ай бұрын
Unless you turn off the lights in the app, it will stay on, assuming you’re using the glove box as the power source.
@BFTVCanada
10 ай бұрын
Hmm tapping into a switched 12v source would be nice for this. That way its only powered when your in your car. Maybe cigarette lighter or the cigarette lighter circuit in the fuse box would achieve this. Can you set the default of the lights so it can turn to a specific or same setting the light was previously on last time it was energized? Also is that installed inside the vent? Hopefully that is a sticky material better then 3M to achieve a good hold through hot and cold fluctuations.
@TheTeslaTours
10 ай бұрын
Thanks for watching. Switching to a 12v power source is a possibility, but would require running the wire through the center console. There is certainly enough cable length to achieve this. The top LED element is secured by the pressure between top dash board material and the upper air vent assembly. I didn’t use the provided double-stick tape, but if the temperature fluctuations cause it to dislodge, I may have to add the tape. Regarding the default setting, it defaults to the last setting used.
Пікірлер: 8