Nice job. I picked up a 038 a week ago with "Made in West Germany" stamped on it, so 40+ years old. Starts and runs well.
@radosmalidzan8465
Жыл бұрын
Kako je nastelovan karburator, koliko je odvijen H i L saraf ?
@sash328
11 ай бұрын
Serijsko tovarniško oba šravfa zaviješ do konca, nato 1.5 obrata nazaj.
@andik859
11 ай бұрын
My 028 wood boss is from 1985. Nice old machine with 51,5ccm and 3,4 HP.
@jamesmcdonald6047
4 жыл бұрын
My local Stihl Dealer had exact same saw in 1984 for $350!!! Stihl Chainsaw Days included full case, extra chain, bar oil, and pump pen for bar grease. Best Buy I’ve made to this day, many cords of firewood fell to that saw. Still a prized tool I’ll never par with. Glad to see another back in service. Enjoy!!!
@alvinfriday9967
2 жыл бұрын
I have an 028 an put a carb kit in it, absolutely love it,runs like a top an has been a very dependable saw for years for me.
@PaddlerOne
3 жыл бұрын
I bought a 028 super back in the 80's. She's been a good friend ever since. Thanks for putting your girl back in the game. Great video Sir.
@cindycindy4536
Жыл бұрын
I was running this saw for about 2 hours at about a 30-50% duty cycle kzitem.infoUgkxfQm1wmg0ItKDLavxj1nXtQY9HP7EF504 and it did a great job. I used the lever for the built in sharpener to clear chip buildup out more than to actually sharpen the chain. It managed to cut some hardwood stumps much larger than it's size without bothering the neighbors with hours of 2 stroke noise.
@lovestihlquality1369
2 жыл бұрын
Bought 028 Super new over 30 years ago. Got an 028 like yours salvaged from a fire still runs great. The bar was blisterd but straight and sprocket good. Bungee strap to tractor or skid steer.
@alext8828
3 жыл бұрын
Pretty honest guy, admitting that he would feel more comfortable with some documentation handy. If I did a video, I would be like Barney Fife and say things like "A course you got yer intake right here and that's where it takes in the air. And yer fuel lines are important too." I would be the biggest ham and cheese sandwich out there. Good video and a good job. Editing in that this is the first video I've seen in a very long time where the host has learned to say "has not run" instead of "has not ran". Congratulations on being able to speak proper English. You are a rare breed.
@pterion34
3 жыл бұрын
This video is inspirational. Am going to attempt reviving a neglected saw similar to yours. It has compression and that’s about it’s got going for it. Never worked on a Stihl before and your video really helps. Thank you for taking the time to show us. I ordered a similar kit on Amazon. Have to order new gas cap ( it might as well be absent). Found two tiny adjustment screws with no top that were threaded into the same length of dry rotted rubber tubing rolling around loosely in the air filter compartment. Can’t figure out where they go. We’ll see. Y’all wish me luck.
@rowlybrown
2 жыл бұрын
The little screws and rotted rubber hose were the gas tank vent line.
@jiggs49us
4 жыл бұрын
Excellent video sir. I have run a Stihl 028 Wood boss since 1981 when I bought my first new saw. I now have 3 028's that I still run and work to keep them in good running order. The 028 series is not supported in the aftermarket with an overabundance of wear parts like mufflers and clutches, but other parts are plentiful. I have Chinese aftermarket carburetors on all 3 of mine and aside from some slight adjustments - they run great. In my opinion - the 0 series that Stihl produced were some of the best saws they have ever made. Thank you for the video - it is always good to see an old champ like that up and running again. They are slow and heavy - at least by today's standards - but "they don't make them like that anymore".
@johnready630
4 жыл бұрын
I agree Fritz , I worked for Stihl Canada for 17 years starting in the mid 80's and to me that time was when some of the best saws were being made , the 028 and 038 are still 2 of my favouries . My son has a few 028's as well that we restored along with some spare parts to keep them going.
@jiggs49us
4 жыл бұрын
I'm on the lookout for a decent 038 but they are rare. Seems like more AM parts are available for the 038.
@maurovisser4359
4 жыл бұрын
I have 028 with original bar . Mine is like new and is made in West Germany. Greate video !
@falllineridge
4 жыл бұрын
Nice! Thanks!
@stevenkinnison8044
3 жыл бұрын
@@falllineridge I just picked up two of the original 028 WB's a few days ago and one of them still has the original bar from 1979.
@thebradleysoncatbirdhill6849
4 жыл бұрын
Great job! I love your pace of work and relaxed style. Seems you were getting some bar smoking, so you may want to check the oiler. Best time to do that is when the bar is off. Fire it up and see if you are getting good oil flow.
@travischaddock4826
3 жыл бұрын
When I read classic I was expecting much older. I'm a stihl mechanic, just got silver but been at it for a few years before I got here. . The other day I found an old stihl saw, massive 36" bar, manuel oiler, not sure on year but it is old. I'm guessing 70s. Going to try and rebuild it and use it down the line! Sounds like a fun project
@em4703
2 жыл бұрын
Its always best to rebuild the old original carb. The chinese copies can give you a lot of problems and it never really runs exactly how it did with the original. Even power can be influenced by bad atomization of fuel or fabrication defects inside of them that can slip unnoticed.
@johnclarke6647
Жыл бұрын
I put one of those on the 13 year old Mantis tiller that I rebuilt and it worked fine, even the spark plug worked great. It had all the parts necessary to replace the whole fuel system. It cost about the same as the one you got.
@qinz1695
4 жыл бұрын
Pro tip: lift the bar while tightening the bar with the bolts. This way the bar doesn't go up while pressing down on the wood, which changes the chain tension.
@clintraley856
4 жыл бұрын
Bar, not blade.
@qinz1695
4 жыл бұрын
@@clintraley856 thanks, English is not my native language.
@clintraley856
4 жыл бұрын
@@qinz1695 Not a problem! I can tell you knew what you meant to say lol. You had some good advice!
@philliphall5198
11 ай бұрын
I just rest end off bar on a 4/4 block and tighten nuts
@madsciencegary3830
4 жыл бұрын
Seems like every project is a bother when the shop is cluttered. Isn't it nice to have plenty of space and know right where the tool you want is? That thing sounded so smooth as soon as it started; I'm impressed.
@falllineridge
4 жыл бұрын
MadScience Gary Yes, this shop is wonderful now. Hope I can keep it clean!
@MrSCOOBY26
3 жыл бұрын
I've just finished rebuilding my father inlaws ms170, I was well chuffed seeing as though it's my first time trying, I'm now on with his ms390.
@waylonlegend4603
3 жыл бұрын
You can’t kill this saw. Bought one in 1984. Still have it.
@FantasticCraptacular
3 жыл бұрын
Stihl have it.
@st7650
2 жыл бұрын
Those saws was some of the best stihl ever produced. Really great saws. Thanks for posting love stihl gonna hit the like and subscribe. I think you can still get OEM parts from the stihl dealer
@1d1hamby
4 жыл бұрын
Nice video, keep up the great work. Hope you keep the old plug for an emergency. I'd suggest getting a couple new OEM filters and fuel lines for backup and maybe an air filter. Hope you were able to give the oil passages on the bar a good cleaning and blowing out.
@stihlhead3338
3 жыл бұрын
Now that this video is over a year old I'd like to see an update on how that Chinese carburetor is working out for you.
@trampster7306
4 жыл бұрын
Good one Wes - I've got some old saws that only ever get used once every couple of years, so the information is very useful. It would be great to see a video on chain oil pumps that are not working so well. 👍👍
@alexpearson8481
2 жыл бұрын
The poor old girl needs a new bar. She’d look amazing. I have one of these about a 1990 model year. Only ever seen about 25 hours of use. I think it’s a winter project to get mine running like new. She’s been hard to start as well. Thanks for the vid.
@jasongrgr
4 жыл бұрын
By no means am i trying to be a chain-saw snob , but i will NEVER , ever , ever , use after market parts on any of my stihl saws again. I live 78 miles from the nearest road , i did not say town. On two occasions i tried to replace the carbs and etc , only to have them crap out on me. Cheap china crap. I will only use OEM parts, no exceptions. Expensive as hell , but guaranteed to work. Out here i dont have the luxury of not having a running saw. Great video and very informative. From Alaska , Jason & Theresa
@paulmaxwell8851
5 ай бұрын
Yup, I must agree. Cheap Chinese crap can't be depended on. Although I do know quite a few people who ARE happy with their Amazon or Ebay parts. I prefer to spend the money on genuine parts .Like you, I live out in the boonies.
@jefferyboring4410
5 күн бұрын
I’ve had very good experiences with the Chinese stuff . I have a 288 kit saw I use with an Alaska mill with a 42” blade and run it extremely hard and deleted the cylinder gasket and ported it! And I’ve ran the little Chinese carbs drilled em for the vac line so I could add adjustable cards to the little non adjustable stihl. I’ve been very impressed and honestly consider my kit Chinese saw equal to a husky. Indian not the arrow
@gregdixon3421
2 жыл бұрын
Great video! It’s been some time since you posted but I’d like to say that I just bought a carb for my leaf blower and weed eater directly from Stihl. Both were about $35 and a tune-up kit with a spark plug, air filter and in-tank fuel filter was about $15...all Stihl OEM products. Both pieces of equipment run like new and the man at the shop (Ace Hardware) was very helpful! So if that knock off has quit you already try a Stihl carb! Thanks for the video!
@Memphian1000
2 жыл бұрын
I'm not believing this - Stihl RAPES their customers for repair parts.
@larrabeejl
4 жыл бұрын
I bought one last week for $25 and it's really beat up bad. It's like the guy who had it never cleaned it and I mean never. It was crusted and caked with hard saw dust and oil everywhere. The chain looked like he was trying to cut some boulders in half. I just got done cleaning the best I could in the field. All of my tools are back home. You are right about the carburetor it is very touchy but now it runs like a champ.
@williamburris3878
10 ай бұрын
I love that you cut the fat out of this! Most people that stay tuned already have an idea what they're doing, just looking for reassurance. Did the carb come tuned perfect? Bravo, nice watch, nose cut was added bonus, up & down a plus! Even a guy with too many saws, loves a refresher & the 3 year old fuel is nothing new to an old cutter! Thanks, enjoyed it!
@falllineridge
10 ай бұрын
Been a while, but I think it was tuned pretty much perfect. I don't use it much, but it's still going strong.
@ciphercode2298
2 жыл бұрын
You should be able to find the model number on the carburetor and buy a corresponding gasket and diaphragm kit either online or from stihl. It's tough to beat those factory carburetors and the kit is usually around $10
@Rottidog68
4 жыл бұрын
Good video. Love them older Stihls. Taking pictures is a great way to see how things were. Another I've heard about is recording the work in a video. Just play back & pause when needed. Many more angles than static pictures. ;-)
@danclas5983
4 жыл бұрын
Good job , love the old 0 series saws . You might be surprised on the quality of the carb . Years ago my Sthil dealer replaced a carb on one of my saws and only charged me their cost , whoppin $15 . I'm bettin a lot of these carbs are coming from the same manufacturers .
@usapatriot4513
4 жыл бұрын
Again another great video on fixing something yourself instead of throwing it out or having someone else fix it. I know I enjoy your videos and so does your followers so keep them coming!
@falllineridge
4 жыл бұрын
Thanks!
@MrFHLH
4 жыл бұрын
BTW like the screwdrivers all nicely laid out in the new tool chest, awesome.
@falllineridge
4 жыл бұрын
It's so nice to be organized. Just hope I can stay this way.
@Rottidog68
4 жыл бұрын
@@falllineridge Good luck with that lol
@joaquinchea2620
4 жыл бұрын
Thanks I have that saw exact saw and need to do the same thing!
@bertjetolberg103
4 жыл бұрын
Im not a veterinarian but Im pretty sure your cat is deaf😂
@reinhardvomschmied293
4 жыл бұрын
It has the option to go to another place lol xD
@wockh
4 жыл бұрын
The cats not deaf you can see it react to the sound
@TomislavKoren
4 жыл бұрын
Cat's not deaf, it reacts for starting the saw. After that it gives zero fuc** to what the owner does. I want cat like that. Mine responds by running away if I sneeze.
@ronaldziehlke9720
4 жыл бұрын
How ironic, I'm working on a chainsaw for a friend of mine. Good timing!
@frankcherry3810
4 жыл бұрын
I keep old tooth brushes for cleaning up around tight areas
@austinhouse5990
2 жыл бұрын
When the camera got sprayed and wet, I kinda had a flash back of my ex girlfriend from years ago. Thank you lol
@Z-Bart
4 жыл бұрын
I have an 029 that I thought I killed. Turns out it was the exhaust screen was all carboned up. Still runs like a top. 👍
@falllineridge
4 жыл бұрын
Nice!!
@morgano7051
3 жыл бұрын
I have an 031 which was built in 71. My grandfather gave it to me to fix up and learn with.
@Mattymu
7 ай бұрын
That's cool I love old saws. No fun to operate compared to the new ones but very cool
@billgreene7456
3 жыл бұрын
Have the same saw… mine a 1987…replaced the same stuff… runs great… that old wood boss is a hoss!
@henryrodgers3409
4 жыл бұрын
Excellent video . Wish I could do stuff like that . I probably would have taken it in and paid over $100 to get it fixed . Didn't know that you could buy separate parts like a diaphragm . Nice camera view at the end in slow motion with the camera going in and out .
@patriots1needed
4 жыл бұрын
Glad you got it running again.
@edwardabel5061
4 жыл бұрын
Thanks for the video, I have the same saw, and I feel confident that I can get it operating better by completing the carb and filter swap out.
@pboulware1737
4 жыл бұрын
Nice Job i did try one of those amazon china carbs on a string trimmer i have with no luck. Tried one on a blower worked fine, its always a hit and miss sometimes with that stuff but for the price you have to take a swing at it. Enjoyed the video!!
@falllineridge
4 жыл бұрын
You are correct. I'm 2 for 2 so far with the Chinese carbs. Thanks for watching as always, Paul.
@Whisperblade
4 жыл бұрын
Pro Tip: Use a lapel Mic on your person, Mount you mic on a surface that is not connected to your workbench, Or use a spring mount for the mic. Doing any of these three options will reduce / remove the horrid noises caused by vibrations every time you touch or move the saw around like you have in this video. You could build a spring mount easily enough (look up pictures of them and you can see how easy they are to make).
@Rottidog68
4 жыл бұрын
I was looking for someone that posted about the table noise the mic picks up. And I'm not even 2 mins into the video!
@attakula
Жыл бұрын
Excellent Video Tutorial and it will help to bring my 37 year old Stihl 032 (1st Gen Solid State Ignition Module) back to life. Problem: Pull cord only works when I take out the spark plug.?
@kevinpilkington6527
4 жыл бұрын
Great video. No need worryin'! That knock off carb will be ok, just keep ethanol out of it and it will last a long time. They are kind of hit or miss but if it runs good in the beginning, there is no reason for it to change other than moisture or corrosion...ethanol makes both very likely. Many Blessings!
@drummerboy3377
4 жыл бұрын
Awesome! I put one of those $17 kits on a stihl weedeater and it's been running for years. Hopefully your mileage doesn't vary. Lol.
@falllineridge
4 жыл бұрын
Hope not!
@curlyyoder
3 жыл бұрын
Awesome video! You got a great saw there! My 028 Super bought in '86 with me yet today! German built. One new kettle. Got boxes full a 51 and 55 Husky hulls parts. Years of building full scribe log homes saws get a work out. Stihl quit the 028 probably because they couldn't sell another saw once a consumer had that one! Got a West Virginia Beach 028 was a piece a crap. Parts for the German built 028. Glad you gonna rebuild the Walbro. Zama can't start a Walbro! Your film was awesome! NGK or Bosch plug for sure! Stihl got cheap and even put Autolite in their saws when they come state side! Can you believe that?! Yeah...the 028 and the 034 Stihls in my shop yet today running strong! The German built ones! Cheers and thanks for a great post!
@TheDeeThornton
4 жыл бұрын
Nice job Sir. You restored my faith after the porch-steps LOL. just kiddin. God bless...
@falllineridge
4 жыл бұрын
Ha! Good one.
@josephmaurice2177
3 жыл бұрын
I have an 024, gonna order my carb kit,and give it a shot
@HobbitHomes263
4 жыл бұрын
Most of the old chainsaws that op end including carb...come into my shop don't run properly because people leave old gas sitting in them 11 months of the year and everything is full of fuel varnish or an old fuel line developed some cracks. Had a Guy bring me a box full of parts to an old 039. Told me I could have it in trade for $50 on a newer saw because the "authorized" Stihl shop at Ace hardware said it needed a whole new top end including carb. They charged hum $85 to get his swa back in a "Casket" The fuel line was cracked almost in half right where it attaches to the carb. I put the saw together, cut 1/4 inch off the fuel line...RAN LIKE A BOSS.. JUst because a shop is "authorized" doesn't mean they have any skills. It just means they sell a lot of NEW saws.
@h20dad1
4 жыл бұрын
I have that exact saw I bought new back in the early 80s. Only problem I have had is I have replaced the clutch springs 4 times. I do not slip the clutch but still cant figure out why I go through so many springs. Same with my Stihl FS85 weed trimmer.
@Iowaflyboy1
4 жыл бұрын
Great video, thank you. I learned a lot about my Stihl.
@craigsudman4556
4 жыл бұрын
Gas gets gaskets... Oh thanks for taking the camera off of the bench, it sounded like I was down a long tunnel. Rather than using the Gum-out for cleaning the outside of things I take a small container (cat food can) of mineral spirits with a tooth brush to clean off the gunk. Great video, thumbs up.
@Sword-Shield
4 жыл бұрын
You're hired...got that thing humming and cuttin !
@xslabcabxhearsex
4 жыл бұрын
Great video.i have a stihl 026 I bought in 1990.used it a ton and never gave me a problem.been about five years since last used and need to get running again.your video is just what I needed to see. Thanks
@Mike137dd-v4r
9 ай бұрын
I picked up an old 021 and a 029 Super recently for $75 for the pair. These things were so dirty with oil, dirt and mouse feces it was disgusting. They were in a barn and I doubt they ran in the last 10 years. I took them apart and cleaned them right down to last speck of dirt. Rebuilt the carb on one, replaced the other. Air filters, fuel lines, fuel filters, fuel tank vents, sharpened the chains... Both of these baby's rip some wood!
@ericscottstevens
4 ай бұрын
Great! I have both of these same saws bought new in 1993 and 1982, still using them today with minimal issues. Repairs include the clutch spring assembly on the 028 flywheel can break if it gets too hot it will freeze up the drive sprocket. The choke on the 028 can become a bit finnicky on initial start up. My 021 has not had major issues since it was bought new. The 021 is a rarity for the hp and the 16 inch bar length. It is light but powerful, use picco chains with no raker. Drain fuel from them if you store them for awhile, the mix can turn into grey puke if in your tank too long.
@briandubbeld5665
4 жыл бұрын
I like say thank you for showing how and how get great parts without braking bank 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
@pv2xeek
4 жыл бұрын
I can not stress enough how bad of a decision it is to replace a perfect OEM Walbro with a Chinese knockoff. It will not last. Voice of experience. Take the time to do it right and clean/rebuild the original. If it isn't salvageable, always buy an OEM replacement.
@samdittmar5142
4 жыл бұрын
Especially if you have one of the older ones with the tillotson carb.
@em4703
4 жыл бұрын
Yep, OEM carbs are the way to go. The reason why the diaphragm was so bad is because of ethanol fuel. Ethanol destroys rubber in time, making it less flexible/brittle. After a few problems due to it in my 2 cycle engines, I run nothing but Aspen now. A bit expensive compared to pump fuel, but it's well worth it for me. I never have to worry about the fuel going bad or leaving it in the tank for months
@jameswoodard3811
4 жыл бұрын
Where do you find own parts. I’ve tried several saw shops with no luck
@skippyi6969
3 жыл бұрын
Everyone saying fuck china and I agree BUT THE NEW OEM CARBS ARE MADE IN CHINA ! So there's that !!!!!!!
@samcarpenter9677
3 жыл бұрын
Great video,I have a Stihl Ms311 and this helps a lot!
@HankHill4
4 жыл бұрын
That’s pretty old my dad has one it’s a stihl chainsaw it has no chain break it’s way older my grandpa got it back in the day it still runs great
@jeffreylockhart6444
3 жыл бұрын
Thanks I need to work on carb line and filter on an old Stihl I have had since 1979. It has not run in 15-20 years . No telling.
@msdespain
2 жыл бұрын
That was a good breakdown.
@gabewilliams6625
4 жыл бұрын
That was my saw when i would cut wood with my fatjer as a teen in the late 80s early 90s, wow I'm going to search his storage now 😃😃
@jeremy1350
4 жыл бұрын
Yay !! It works. Well done. $17.00 and fifteen minutes and that chainsaw is as good as new !
@falllineridge
4 жыл бұрын
Not a bad deal! Took more than 15 minutes though!
@johnclarke6647
2 жыл бұрын
I picked up a crash damaged 026 this week for $25. Couldn’t pass that one up. I have ordered a new AM gas tank for it. The worse thing was how filthy it was. It had sat at my local Stihl dealers for about 15 years. It was missing an air filter cover and the air filter was damaged. I have a new rear handle ordered for it and will put it on when it comes in. I figured it was a running saw when a tree fell on it and I was right.after I cleaned it up I squirted some gas down it’s throat and it runs. I am goin to connect it to a container of gas, today, to see how good it runs. I think it will do fine and the oiler may even work. I have a bar on it but no chain. I can put a bar an chain on it but just want to see how it runs before I take it apart to put the new rear handle on it. I also use Bosch WSR 6F plugs in all my Stih saws. I don’t run that Chinese crap either. To make it start a little easier, squirt a little two cycle down it’s throat and start from half choke.no way I am pulling a saw over 14 times to get it to crank.
@beingsneaky
3 жыл бұрын
sometimes soaking it liberaly with WD40 will soften them back up.. just a trick to try when you new card or carb kits has not come in yet.. some ppl soaked in brake fluid now that will really soften them up lol..
@jimg2553
4 жыл бұрын
My 028 AV super "stihl" jams after 35 years of use and hundreds of trees. The new ones are pieces of shit now. Inherited 2 newer ones from my Dad and both won't run now. It seems i remember paying around $400.00 for my 028 AV Super way back in the 80's,it was made in West Germany
@paintingandlife4288
4 жыл бұрын
Jim G I too got a Av super 028. Dad can’t walk with out crutches so that thing is my duty to run now. I’m going to redo it like this guy soon. I have a huge oak to trim up
@masruroh5088
3 жыл бұрын
kūkjjhy678
@HondaMechanic1
4 жыл бұрын
Choke should have been on from the start ... Hard on the brake and clutch running it that long with the brake on ...
@alexatkinson9873
4 жыл бұрын
I’m a stihl certified tech and this is something that is way too common. You can start to melt the housing of the saw in just a few seconds with the brake on at half choke. Also some of these cuts felt really dangerous to me, really close to that upper quadrant of the bar where kickback becomes an issue.
@gmcman355crazy
4 жыл бұрын
File the rakers down a little so it actually makes a chip not dust lol
@johnclarke6647
Жыл бұрын
I use Super Power and a paint brush to clean up saws with, along with my air compressor. Carb cleaner or break cleaner can mess up the paint or plastic.
@johnclarke6647
Жыл бұрын
@@ElectronicMusicUnderground I use our local quarter car wash, after spraying down the parts with Super Clean. It is faster than getting out my big pressure washer. I then blow them off with compressed air and let them dry for a couple of days. None of my stuff has points. If they did I might do things, differently. During winter, I put the parts in my office over a heater vent. They dry out nice and fast - a weekend is usually sufficient. I break them down to their biggest pieces. I remove carb, muffler, coil, starter and block up the intake boot and exhaust port. I usually put a little WD40 into the intake boot beforehand. I leave the plug in. I do not want water getting into the cylinder. I spray wash the cases, starter, rear handle, top covers, sprocket cover - just about anything plastic or metal. I will tell you something I found on my 021. I pulled the cover on the rear handle and it was completely packed with sawdust. I wondered why the trigger was a little slow. Not any more - I cleaned it separately. You can eat out of it, now. Usually, the rear handle/fuel tank is one of the filthiest parts, along with the muffler area and the PTO side.
@MrFHLH
4 жыл бұрын
Not just me then who has that problem, trouble is when your busy................ even the wife will come in sometimes and sort out the mess!!!
@jd-pf2oc
2 жыл бұрын
“The only thing wrong with it is it just won’t run.” Yup, I’d consider THAT as being something wrong with it…only 🤣🤣
@darrellpickering8535
3 жыл бұрын
The 028 AV was made from '70-'80 & the newer versions were made until '90. They were made in 43cc & later in 47cc. As far as I'm concerned the smaller 1s ran better altho both versions had a habit of the crankshaft breaking next to the seal on the PTO side. It's thought that bearing vibration was the culprit. Seen several that way. Stihl musta sold several million of those.
@calvinhelms7396
3 жыл бұрын
This was a great video enjoyed the details
@justinpyne968
4 жыл бұрын
I had to replace the coil pack and the carb on mine had to use farmertec bits but she is good as new!
@tomhughes4980
3 жыл бұрын
Nice video! I've had 2 026 farm boss with 18" bars, both running great for 25 years
@jagdishprasadkhaitan4815
Жыл бұрын
As u have cleared all the dirt from the chainsaw and after changing some parts of chainsaw, the chainsaw was working.
@nancyoffenhiser4916
4 жыл бұрын
Love your cats!!
@georgesweeney4171
5 ай бұрын
In Ireland it has to be Japanese spark plug. It’s just the law of the land 😂😂
@crazzywolfie
4 жыл бұрын
the metering diaphragm does not pump the fuel. it is pretty much like the float in a larger carb and shuts fuel off when the carb is full. when they dry out they stick 1 way or the other so they will either let no fuel thru or let a lot go through and possibly flood the engine right out.
@chriswoods2742
Жыл бұрын
I do hope that they are identical in quality as well. Yeah, pls let us know on that one
@danielpadgett2831
3 жыл бұрын
My dad has a old 028 wood boss it has no chain brake it runs like a new one I think he bought it new in the early 80's. Update the 028 wb was made for only 1yr. 1979 to 1980 according to stihl
@rodneybilly7389
Жыл бұрын
Great job buddy😊
@jaboneyoyo5843
2 жыл бұрын
The original plug that belongs in it is a BPMR6A by NGK
@krazykrabz4733
4 жыл бұрын
loved the video man! keep up the good work.
@falllineridge
4 жыл бұрын
Thank you!
@superflanker972
4 жыл бұрын
I have 3 ms038..but three of them has been sitting in the store in 4years..
@steveagricole1375
3 жыл бұрын
Greatly done!!
@stefank264
3 жыл бұрын
Well done !!
@Residew
5 ай бұрын
Thanks for the vid. Very helpful. Just found this model on the side if the road and a Ibe never had a chainsaw so i didnt know where to start. What were you doing at 13:08 and 13:30? It was hysterical to see the car unphased btw.
@Fatamus
4 жыл бұрын
I have an 028 and I've rebuilt it many times but the last time it was used I dropped/tossed/threw it (getting away from a rouge tree). Well it cracked the gas tank. I've tried different methods of repair. I don't think one can just replace the fuel tank on this thing without going down the rabbit money hole too deep. Thoughts?
@bubbaj308
4 жыл бұрын
Did you try gorilla glue+baking soda?
@markfoery9513
4 жыл бұрын
I patched a hole after hitting the tank with another running saw. I used metal mesh and J B Weld....
@ppipowerclass
4 жыл бұрын
Good lord. If this is a " classic ", I guess my 045 is a dinosaur.
@MultiPowerlin
4 жыл бұрын
My 036 also must be a dinosaur
@verteup
4 жыл бұрын
It's a classic as in it's a popular saw that's well known by a ton of people.
@saeidmoshiri6007
4 жыл бұрын
O
@morgano7051
3 жыл бұрын
This make my 031 seem old. Which it is it was made in 1971. My grandpa gave it to me for my 18th birthday to restore and learn with
@darrellpickering8535
3 жыл бұрын
It is, lol! It's basically an overgrown 041. They were 75cc & would handle a 24" bar just fine. It & the 056 were sister saws.
@outermostoutermost9418
2 жыл бұрын
I had a old one with points in it and had to by the cam tool to set them up but I had a o31 and a 041 with points so np .my 041 the cam wore down so I couldn't set the points anymore so had to make it electronically Inc so it was done I like the old saws
@djrtime1398
Жыл бұрын
So, 3 years ago, how has the saw and repairs been holding up? If you were to do this for a customer, what would be the total cost? Thanks, great video
@falllineridge
Жыл бұрын
No idea on the cost, I don't do this for a living. The saw still runs like a top.
@andybyerly5629
4 жыл бұрын
I ran the same plan on my Stihl saw..soaked the carb in carb cleaner for at least a week as loose parts...No help.. Friend says soak the carb body in 1/2 and 1/2 water and pine sol cleaner...The second I dropped the carb body into solution .....black oily stuff came out...Left it for the weekend.... came home ....water was really dirty......Back together....ran like it was on athlete on steroids...and still running ...Think pine sol love to eat varnish
@falllineridge
4 жыл бұрын
Good info! Thanks for sharing.
@alexpro5670
Жыл бұрын
Good job man!
@donaldo5879
3 жыл бұрын
Hi there from Scotland thank you so much for sharing your video it was really informative as I'm a newbie when it comes to chainsaws, I am thinking of purchasing 1 of these older saws instead of the new cheaper models that are out there at the moment is there anything you could advise me on what to look out for before I purchase one, the one I'm looking to purchase is £200 pounds sterling & looks in good condition is this a fair price ? Any help would be appreciated in this matter....Thanks
@BESHYSBEES
4 жыл бұрын
Did a 030 for a mate not long ago, had the fuel line inside the tank rotted away and the diaphragm in carb was split, so new carb and fuel line and now she runs like a dream, eBay carb $40 fuel line $14 the local stihl shop tried telling him $400 dollars to fix it and even tried to sell him a new saw 😂
@falllineridge
4 жыл бұрын
Nice! Saved him a bundle.
@HobbitHomes263
4 жыл бұрын
Had a near brand new Husky come into the shop. GUy only had it for a month..Leaking jackup , non adjustable oilpump had failed. It would only run sitting straight up. Replaced the pol pump with...yes another brand new and probably useless Husk pump ...the mazing thing was there was almost 14 inches of fuel line coiled up inside the tank. The weighted filter had no room to move
Пікірлер: 273