Now try that with a bolt that was really stuck. Like one from a twenty year old F250 exhaust manifold.
@toolsforwork
5 ай бұрын
OK
@61RdlyKryk79
2 ай бұрын
A 390 high boy
@ReeceDaBeastt
Ай бұрын
@@toolsforworkdoes he have point?
@boomer9341
Ай бұрын
Currently trying to get one off my egr pipe on the manifold. Real pain.
@jamesjohnson5700
Ай бұрын
Did you use wd40? Us a high power torque wrench like Milwaukee as you use the torque wrench. Stop to pray wd40
@DexterXxX
Жыл бұрын
Now try to remove real snapped bolt that snapped when you undoing
@toolsforwork
Жыл бұрын
Broken when trying to remove at first
@DexterXxX
Жыл бұрын
@@toolsforwork from what we can see on video it broke when you turning right, which means you overtightened the bolt and it snapped
@toolsforwork
Жыл бұрын
Yes, this is mainly to demonstrate the broken wire removal tool
@feyrrari
Жыл бұрын
yea and broke the removal bit in the hole. 🤦🏾🤷🏾🥴 show us that with this wonderful sound. 🥴🤣😅🤣
@ebonysteel9158
3 ай бұрын
Where did you buy that extraction tool at?
@psylentsage
Жыл бұрын
I have never been lucky enough for it to go this smooth
@toolsforwork
Жыл бұрын
You just have to try more
@looking_33
7 ай бұрын
skill issue
@kaolid
23 күн бұрын
It’s simple. Just drill bit a hole. Hammer the bolt extractor with an actually heavy hammer. Uncrew out.
@ozzyprod9332
5 ай бұрын
I fucking hate KZitem for showing me all this successful attempts meanwhile I failed like an idiot….
@toolsforwork
5 ай бұрын
Sometimes it’s not your fault and you need to follow the steps more carefully.
@JohnOcampo-pg4tr
2 ай бұрын
@@toolsforworkyour statement contradicted itself So it is their fault because they didn't follow the instructions carefully
@ericbrittingham6956
22 күн бұрын
That’s why I’m here now.
@lukeg6781
9 күн бұрын
@toolsforwork thats a nice way of saying that you did it wrong and not followed the steps. Is this guy serious. I just broked an extractor of in a bolt that u drilled into and tried to extract. I followed instructions and no luck. You will be lucky if you really do extract a broken one.
@Kilz78
Жыл бұрын
Don’t ever use an impact gun on the extractor!!
@toolsforwork
Жыл бұрын
Why?
@antj211
Жыл бұрын
Found that out the hard way
@Kilz78
Жыл бұрын
@@antj211 you and me both. Shit job turned 100% worse. I learned my lesson and have never done it again
@narcissisticidiot1727
Жыл бұрын
Hammer drill?
@coltengottschalk1049
Жыл бұрын
Because if you break one of those off in the bolt you’re next step is pretty much a welder. You won’t drill that back out unless you wanna go through 100 bits and be there for 2 days
@jayd9389
4 ай бұрын
everyone watch the very begging of the video , he tightens the bolt and breaks it off, the socket spins clockwise when it snaps off , not a a seized bolt ,
@toolsforwork
4 ай бұрын
You can have a try
@PitPwny
4 ай бұрын
They cut the bolt 3/4 of the way through, then when it bottomed out the torque snapped the remaining section off, inside the hole. You can see the cut off disc marks it on “broken” bolt face. Not the fakest of demonstration videos, by far, but no it’s not a 20 year old bimetal seized fastener either. 5/10 for integrity.
@sc7568
7 ай бұрын
Show us a real stuck and broken bolt. This one has been cut first. Than you took the head off when tightening it with your impact.
@toolsforwork
7 ай бұрын
This is to better demonstrate the tool
@sc7568
7 ай бұрын
@@toolsforwork there's nothing to demonstrate in this way.
@Hopelessthugg
Ай бұрын
@@sc7568exactly. Very stupid person trying to trick even more stupid people into buying the most stupid tools. Do it right to begin with.
@christianfiguroa7147
Жыл бұрын
What about a 10mm bolt facing the opposite of you on a 07 highlander the bank 2 solenoid
@toolsforwork
Жыл бұрын
That might require a different size extractor.
@dannypowers4995
Жыл бұрын
My experience with broken bolts are the small ones. 3/8 and smaller. It's tough to drill a hole in a small bolt and use a Easy-out.
@toolsforwork
Жыл бұрын
What you said makes sense.
@SoChillExplores
Жыл бұрын
What can be done in thia case?
@madjackgamingandfitness498
3 ай бұрын
It is, almost not enough bite to surface area. I’ve hammered in torx bits and been able to it like that, since fasteners that small “shouldn’t be” that tight it works. I quote shouldn’t be, but idiots with impacts never learned a torque spec.
@Eluderatnight
Ай бұрын
@@SoChillExplorescarbide burr on a rotary tool with a steady hand. Put a small divit dead center and drill to tap size. Next carefully go around the perimeter with the burr. It should leave behind a "wire" in the treads that can be removed with a dental pick. Tap to clean any knicks in threads.
@chins2009
8 ай бұрын
Try with a real stuck one that you broke, preferably the exhaust studs, and see if it goes this smoothly.. 😂
@toolsforwork
8 ай бұрын
OK
@YourFeelingsDontMatter.
7 ай бұрын
these vids are staged and it won’t ever happen lmao
@musicased9591
Жыл бұрын
Lol how the fuck do you do it without a power tool?! I literally have 3 inches of clearance so you can't even hammer a bit straight into the bolt.
@toolsforwork
Жыл бұрын
Maybe I can also use soldering
@shhoward71
7 ай бұрын
Love that soothing 70's soundtrack
@toolsforwork
7 ай бұрын
Thanks!
@wmdjohnson
Жыл бұрын
How to remove an already loose bolt 🔩 with broken head 😅😂🎉bravo, bravo 👏
@toolsforwork
Жыл бұрын
Thanks! 😃
@Hopelessthugg
Ай бұрын
Right!? Guy is such an idiot. Really gotta sell those tools to feed the kids I guess.
@jeffersonperkins7582
Жыл бұрын
Thank you for not talking for 5 minutes before showing how to do this.
@toolsforwork
Жыл бұрын
Operations can be displayed without language.
@DoorTrash
8 ай бұрын
Totally agree lol
@jhustle74
5 ай бұрын
What do you do when the extractor tool breaks and the material of the extractor tool is impossible to drill through?
@toolsforwork
5 ай бұрын
Try welding
@SIC-SEMPER-TYRANNIS
9 ай бұрын
Yep, just snapped off the removal tool. Blee thru 30 bits drilling it then the engine block flange snapped when i used another one. That git the bolt out anyway. Damn 2011 Ford Fusion Belt Tensioner Bolt.
@toolsforwork
9 ай бұрын
Consider using tools and careful operation, or consider welding the broken bolt out.
@kirkkoblect5915
9 ай бұрын
Only if it was always that easy
@toolsforwork
9 ай бұрын
It’s not difficult if you use the right tools
@edthelasttribe9580
Жыл бұрын
😅 you saying that the steel plate is more rustier and older than actual bolt inside it? 😂 Everyone can see , it’s good for marketing, but that’s a definite scam, no disrespect to you.
@toolsforwork
Жыл бұрын
You can actually see if it's true.
@atmoore74
3 ай бұрын
Wish i could even get a drill straight on it. Mine are never in such a convenient location unfortunately
@toolsforwork
3 ай бұрын
Then we need better tools
@pingpong9656
5 ай бұрын
BS - if it snapped for real - it would never budge with just an easy out.
@toolsforwork
5 ай бұрын
Why isn't it true?
@pingpong9656
5 ай бұрын
@@toolsforwork Experience.
@GamesYouLike25
10 ай бұрын
What drill bits are you using I have titanium ones from dewalt And it does not go into the metal so easily
@toolsforwork
10 ай бұрын
Alloy drill bit
@zakkutv1623
Жыл бұрын
I have the same extractor set. I used my impact and it broke the bit inside the bolt. I ended up having to use a hackzall and cut the bolt off. Which made it 10x more harder
@toolsforwork
Жыл бұрын
Please use the tool correctly.
@zakkutv1623
Жыл бұрын
@toolsforwork used my impact on the lowest setting. Did practically the same thing you did. Not sure how I could've done it differently
@chucklamantia3067
Жыл бұрын
he called you a stupid Bastard
@kotonarimasu6597
Жыл бұрын
@@zakkutv1623use a breaker bar next time? Using impacts on anything that isn’t suspension you’re just asking for it
@zakkutv1623
Жыл бұрын
@kotonarimasu6597 can't use a breaker bar in my scenario. No space to fit. But you're not listening to what I said. I did almost exactly everything to a T. Just like the video. And it broke. That's the problem.
@ommah3667
5 ай бұрын
What kind of drill bite you use for thik steel like bolts? I broke many already
@toolsforwork
4 ай бұрын
Alloy drill bit
@youngnawabs3517
4 ай бұрын
Its like black head removal from the body
@toolsforwork
4 ай бұрын
Like it?
@glasgowfunctionsify
7 ай бұрын
How do these videos make drilling metal bolts look easy? Been drilling mine for 2 hours
@toolsforwork
7 ай бұрын
Please use appropriate drill bit
@StrongerThanBigfoot
5 ай бұрын
So when you drill the first hole are you drilling the normal way or have the drill on reverse while holding down
@toolsforwork
5 ай бұрын
Drill holes as normal
@steviezxr
9 ай бұрын
If I tried this it would take 6 hours
@toolsforwork
9 ай бұрын
It won't take that long
@Javiertumadre4820
8 ай бұрын
What' brand of drill screw are they using?
@toolsforwork
7 ай бұрын
local brand
@F34RL1C1A
7 ай бұрын
Did we just get Rock Rolled by a Slowed version of the song?
@toolsforwork
7 ай бұрын
Really?
@antj211
Жыл бұрын
Tried that piece and it snapped off in the bolt😩
@toolsforwork
Жыл бұрын
You must have bought a substandard product
@falkirk8413
Жыл бұрын
@@toolsforwork yea they bought yours 🤣
@Hopelessthugg
Ай бұрын
Exactly. This is what happens every time you try this on a RUSTED SEIZED BOLT. Which this was not. This was faked. U can get a new screw out of anything once the head is broken off, there is no more torque on the threads. Stuck is different.
@Eighty86Six-fu5rc
4 ай бұрын
Does it work with broken bronze bolt too?
@toolsforwork
4 ай бұрын
Yes
@Jahames69
9 ай бұрын
Do you make a model for a 9mm bolt?
@toolsforwork
9 ай бұрын
Can be customized if necessary.
@donwest5387
9 ай бұрын
looks like your bolt was over-tightened; the threaded portion wasn't rusted in
@toolsforwork
9 ай бұрын
Some are like this, and some have not been maintained for a long time.
@OceanOsborn
13 күн бұрын
My extractor bit snapped and my drill wont drill into the new steel from the extractor... fml.
@toolsforwork
12 күн бұрын
Please use the correct tools
@lilsadboy69
9 ай бұрын
Looks like you cut the bolt 😂😂
@toolsforwork
9 ай бұрын
Well, this is for a better presentation tool
@prjstreetphotography258
12 күн бұрын
I think it depends how you your the drill, if youbare stupid to use it on the biggest speed at the beginning then you cry pike this ppl in comments
@toolsforwork
11 күн бұрын
😂
@paulgirard2718
Жыл бұрын
Sawed off screws are easier to get out with a needle size extractor than would be a genuinely snapped ones of that diameter. FAKE
@toolsforwork
Жыл бұрын
How can it be faked? If there is no actual operation, then please tell me how I can make it fake.
@CM-xr9oq
Жыл бұрын
It's a demonstration, dude
@richardmansilungan7972
10 ай бұрын
What name of this tools? And how much
@toolsforwork
10 ай бұрын
Broken bolt extractor
@Tatoebot
12 күн бұрын
You really had to grind the bolt down so it would snap off 😂😂😂 🤡
@toolsforwork
11 күн бұрын
OK
@adivarso8175
2 ай бұрын
Not a centre punch in sight and using an Impact to extract.. it's more of "How not to"
@toolsforwork
2 ай бұрын
??
@briancodd1405
9 ай бұрын
Maybe try it on a genuinely rusty bolt, not one that was cut 3/4 ways through before you broke it off 😂
@toolsforwork
9 ай бұрын
Okay, still no problem.
@Hopelessthugg
Ай бұрын
@@toolsforworkproof you don't work on cars. If you did. You'd just teach people how to remove a seized bolt the right way.
@ssgsschiraq8858
2 ай бұрын
Thia tool is ass dont get it please.. mine broke insdie and i had to keep drilling out
@toolsforwork
2 ай бұрын
Why?
@josezavala7551
5 күн бұрын
They work so good I can’t get the extractor of the bolt now😂
@toolsforwork
4 күн бұрын
Thanks!
@Teletey
19 күн бұрын
never torque old bolts to specs, they will break
@toolsforwork
18 күн бұрын
OK
@ronaldwoofer5024
Ай бұрын
those things dont work... they snap off every time
@toolsforwork
Ай бұрын
Which tool will break?
@oakfront
Ай бұрын
In dreams it always happens like that, but in reality and if you work with cars you know that's 1 in a hundred lol.
@toolsforwork
Ай бұрын
Maybe not
@Hopelessthugg
Ай бұрын
@@toolsforwork100 out of 100 times when it's a faked video for clicks.
@alexpearson8423
Ай бұрын
Everyone in the comments sounds like some serious soft boys
@toolsforwork
Ай бұрын
😂
@jonroland2702
Ай бұрын
Might not have broken the bolt to begin with if you had the impact turning the right way 🤦🏻♂️
@toolsforwork
29 күн бұрын
Really?
@jonroland2702
29 күн бұрын
@@toolsforwork I noticed the impact turning clockwise and the extractor was turned counterclockwise.
@yngjon
9 ай бұрын
They make it look so easy
@toolsforwork
9 ай бұрын
It’s easy with the right tools
@ravit928
3 ай бұрын
Try removing broken exhaust bolts
@toolsforwork
3 ай бұрын
OK
@scottdavila8723
Жыл бұрын
What kind of drill bit is needed to drill through the bolt?
@toolsforwork
Жыл бұрын
Drill bits for alloy metals
@scottdavila8723
Жыл бұрын
Do you have a picture of it?
@jamesjohnson5700
Ай бұрын
Im doing this tomorrow. I wish me the best 😆 🤣
@toolsforwork
Ай бұрын
OK
@Lindenbum
6 ай бұрын
Pretty dumb tightening the bolt you broke.
@toolsforwork
6 ай бұрын
To better demonstrate the tool
@travisl5125
2 ай бұрын
Extractor just made my hole bigger Did nothing
@toolsforwork
2 ай бұрын
Really?
@travisl5125
2 ай бұрын
@toolsforwork yeah it just turns and turns. U even hammered it in. Its a small 5x20m bolt if that matters. Mabye the bigger ones work better
@VisionsTruth
17 күн бұрын
Is that what those are for?! /s
@toolsforwork
16 күн бұрын
?
@larryhilmes3360
24 күн бұрын
Does not work on every bolt.
@toolsforwork
23 күн бұрын
Please use the correct tools
@EltallerdeJeffer
11 ай бұрын
Now let's do it with a really rusted bolt that stay there about a few year ago 😂
@toolsforwork
11 ай бұрын
? you can come and try
@CHUKWUMAOBIMIFEANYICHUKWU
3 ай бұрын
Please I need the tools.
@toolsforwork
3 ай бұрын
Need it?
@Its_Me_Salman
Жыл бұрын
😡😡 Grinding cut blot
@toolsforwork
Жыл бұрын
tool demo
@speedguy26
2 ай бұрын
It's never that easy 🙄
@toolsforwork
2 ай бұрын
Maybe
@team_Green562
7 ай бұрын
He cut the blot
@toolsforwork
7 ай бұрын
is to better demonstrate the tool
@writtenpieceopaper1
Жыл бұрын
That elevator music.
@toolsforwork
Жыл бұрын
? like it?
@writtenpieceopaper1
Жыл бұрын
@toolsforwork surprisingly, yes! It's a funny contrast to all the routine mayhem going on
@stevesanouk3475
Жыл бұрын
Who specialize in these type of work. A mechanic? A welder? Your work skills look professional.
@toolsforwork
Жыл бұрын
Just a normal tool user.
@sledfam3659
Жыл бұрын
Way too much work. CP 9361 and 60 seconds is all it takes…….
@toolsforwork
Жыл бұрын
Maybe.
@abelmaldonado6643
7 ай бұрын
That looks like it was cut with a cutoff wheel
@toolsforwork
7 ай бұрын
For better presentation tools
@못난히
Жыл бұрын
볼트 머리 없음 잠금 방향 홈 드릴 아닌 여는 방향 홈 드릴 이용 볼트 나사쪽 기름 분사후 여는 방향 홈 드릴 이용 조이는 방향 홈 드릴 있어도 여는 방향 홈 드릴 못 보아씀
@toolsforwork
Жыл бұрын
I don't understand what you mean
@romb4u00
9 ай бұрын
What is the name of last tool( threaded)?
@toolsforwork
9 ай бұрын
reverse thread extractor
@davidmalpica3064
4 ай бұрын
Dónde puedo comprar esta herramienta
@toolsforwork
4 ай бұрын
Please wait for our online store
@smokey4519
9 ай бұрын
What is the song in this video?
@toolsforwork
9 ай бұрын
Horned Flute Chill
@SoldierBoy3064
11 ай бұрын
center the drill hole
@toolsforwork
11 ай бұрын
OK
@shreyanshverma7290
Жыл бұрын
Buy link please
@toolsforwork
Жыл бұрын
Please wait for our online shop to be online.
@Kojasmedia
Жыл бұрын
how much this
@toolsforwork
Жыл бұрын
not expensive
@Kojasmedia
Жыл бұрын
@@toolsforwork please tell me how to buy this
@abdallahbendriss2599
Жыл бұрын
Thank you
@toolsforwork
Жыл бұрын
😊
@josemares1439
Жыл бұрын
Lol
@toolsforwork
Жыл бұрын
?
@lukeg6781
8 ай бұрын
Wait am I seeing this right. He snapped the bolt of with impact gun while tightening it. Fake video. Try removing a real stuck rusted bolt.
@toolsforwork
8 ай бұрын
To better test tools
@michaelfulton7116
Жыл бұрын
Wow what did you use to cut the bolt off below the surface. Amazing
@toolsforwork
Жыл бұрын
Angle Grinder.
@lueyR
Жыл бұрын
Looks like they cut the bolt 75% with an angle grinder. Installed the bolt, then rattled the head off... definitely not a seized bolt.
@s3ct0rxf0ur9
2 ай бұрын
why is everyone trying to act like these don’t work. too tight? pull harder. these things work lol
@toolsforwork
2 ай бұрын
You can choose the right tools
@thomasberg270
10 ай бұрын
That’s total bs. You should’ve used an extractor twice that size, and I’m betting it still wouldn’t go that smooth.
@toolsforwork
10 ай бұрын
You can try it yourself
@thomasberg270
10 ай бұрын
The bolt was loose and I’m guessing already cut before you (tightened)?? It to break it free?
Пікірлер: 224