Glad to hear honest opinion like this, not fanboys opinion that always the 3rd party expensive parts are the superior one in quality and durability. Brompton original parts while not cheap but should works "better" in term of durability and just fits for the purpose. Not trying to defame but I do heard a lot of negative feedback from this TPs brand recently, one of the recent case was the handlebar stem for T Line. Mod Sensibly and Ride Safely!
@rainbowhiker
20 күн бұрын
I like the stripped look and lightness of this bike. 18#'s. WOW!
@davidlemoda2677
8 ай бұрын
Great videos …. What a joy to watch them when they come out ! Well done to both of you !
@RobBastien
4 ай бұрын
I have the exact same issue, thanks for posting.
@vantrogh
9 ай бұрын
Very helpful video, Shu. All my chain tensioners are still stocked. I do have (1) after market in metal as spare just in case...🤔😀
@billhemingway5558
4 ай бұрын
good advice...thanks
@platypushatstand
9 ай бұрын
Why did you use an adjustable wrench in the park to remove the tensioner, when in the station you were using the Brompton toolkit that you said you kept in the frame?
@BromptonFamilyTime
9 ай бұрын
I carry a tool kit in my backpack so I have my tools no matter what bike I am on during my ride videos. The Brompton Tool Kit stays in my superlight frame since I use it for commuting.
@finncarlbomholtsrensen1188
8 ай бұрын
I have changed near all bolts, discs, nuts and some of my brake parts on my bike to titanium + the front axle on my 2019 SuperlightM6LXBrompton. As a Dane I of course also use Mudguards and I expect to reach well below 8 kilo, about as a similar 4 gear T-line with mudguards (changing the Heavy Metal clamps), and still with my 6 gears, and no squeaking noise from the new stem post when riding! I use a metal chain tensioner, but with the plastic wheels, for less noise! I have had some problems finding a tensioner which fit my bike, as several didn't had the right length! Finn. Denmark
@kwokweng76
8 ай бұрын
thanks for the video shu, by the way, lightworks chain tensioner is good
@sfhy7971
9 ай бұрын
Hi love your videos! I dont have a brompton but watching your videos makes me want to own one. Am looking at the P or T line and would like to upgrade some parts when i get one. Could you tell me which type of bottom bracket i should use for a P and T line pls? Appreciate the help thanks!
@BromptonFamilyTime
9 ай бұрын
The bottom bracket is usually paired with a crankset so it would depend on which crankset you plan on getting. I personally do not recommend you change any part until you get a few months of riding on the Brompton. Most people don't need to change any parts. It's a great bike out of the box. I am just a crazy person that modifies all of my stuff. Good luck!
@sfhy7971
9 ай бұрын
@@BromptonFamilyTimeThanks so much I like to modify too i have a few road bikes but would also like to get a brompton. Keep making the videos!
@ryhold
9 ай бұрын
I’ve got a somewhat unrelated question: How much stiffer are stem and fork (and the entire ride experience) on the T-Line compared to the Superlight with its titanium stem and fork? Im still undecided whether to upgrade a Brompton with titanium parts or get a T-Line. I don’t like too much movement in the front when riding. Thank you very much!
@BromptonFamilyTime
9 ай бұрын
I am a smaller rider so I don't notice any flex unless I am going uphill. That said, it is not a problem for me. I have heard heavier riders and taller riders feel the flexing more. I would recommend you test both bikes.
@ryhold
9 ай бұрын
@@BromptonFamilyTime Fair enough. It’s a tad tricky to find a ‘traditional’ Brompton with titanium stem though. The T-line I rode donkey’s ago in London, before it was available for purchase. Don’t quite remember what it was like. Will test ride both P-line and T-Line at a Brompton Junction after Christmas to compare the flex. Cheers!
@phungmoe2302
9 ай бұрын
Friend, it is gone.... U can even see the spring back is dead. Of course ur nuts n washer hv to be good fit n tight. 💪💪💪💪💪
@phungmoe2302
9 ай бұрын
The jokey...... 3rd party... Plastic or metallic.... All cheap plastic n metal. So stick to stock.
@sandydennylives1392
8 ай бұрын
Mine fell off in the rainy dark coming off the bus after a FW flat at work, so didn't have a personal choice.
@MrAleuxandre
6 ай бұрын
Thank you very much for your video. I also have one Ti Parts Workshop wheel installed on my chain tensioner and have noticed that I've been having problems with it derailing in bad weather for the past few months. After further inspection and cleaning, it seems that the Ti Parts Workshop wheel no longer runs smoothly. It now works worse than the original Brompton part! So I decided to go back and opt for the Brompton wheel... Do you know if it's possible to clean the internal bearings ot the Ti Parts Workshop wheel ?
@BromptonFamilyTime
6 ай бұрын
It depends on the damage and if Tiparts can send you the replacement parts necessary. It might not be worth it due to cost. Original parts may be heavier but at least they are more affordable. Good luck.
@glore2002
2 ай бұрын
Thanks for your videos. They are very helpful. I would like to ask you about alternative chains for six and three speed Bromptons. Here in my country Brompton chains are not sold so I have to look for an alternative. Shimano HG40, HG71 and KMC 7 and Z8.3. They all are 3/32" Any recommendation? Thanks in advance!
@BromptonFamilyTime
2 ай бұрын
For my superlight and steel Bromptons I use the KMC X8 Nickel Plated chains. They work well and are cheap. I would recommend this brand. I go through 3 chains a year on my superlight since it is my commuter bike and gets the most mileage.
@glore2002
2 ай бұрын
@@BromptonFamilyTime Thank you very much! Great data. I will go for that chain. Do you have a video explaining how to change chain?
@BromptonFamilyTime
2 ай бұрын
I don't have a video but it is simple. After taking off the old chain I lay it flat next to the new chain and then remove the links to match. Just be careful and make sure your removing the right pin or else it may end up being too short. After you do it once, it is easy.
@mranonymous8815
9 ай бұрын
These tires look pretty "fat" for a Brommie - are that Continental Contact Urban 16 x 1.35? Because they look more like min. 1.5 ... ?
@BromptonFamilyTime
8 ай бұрын
Yes they are the Continental Urbans. Best tires ever.
@neotron5th
9 ай бұрын
Most of Ti-Parts products are fancy but not durable. H&H and MiniMODs are much better than Ti-Parts.
@BromptonFamilyTime
9 ай бұрын
I will try Minimods one day. I don't think I have tried there stuff.
@Art-What..
9 ай бұрын
BFT..good stuff,why didn't you upgrade to an aluminum tensioner maybe some cool ionized color 🥸
@BromptonFamilyTime
8 ай бұрын
I'm trying not to spend more money lol. Maybe one day I will get another nice one.
@Art-What..
8 ай бұрын
Yeah,when you get one you can get a blue one to match your brakes 🥸
Пікірлер: 32