Yer killing me James, you walk right by all of the Hollows and Rounds. Those of us in the southwest are lucky to see such treasures.
@LewHarriman
25 күн бұрын
Thanks for showing us this event, James. Right here in my neighborhood and I had not known about it.
@WoodByWrightHowTo
24 күн бұрын
Are you going to be here today or tomorrow?
@LewHarriman
24 күн бұрын
Actually,@@WoodByWrightHowTo I've just decided to swing over there this morning. (Saturday) Hopefully, I'll have a chance to meet you in person.
@WoodByWrightHowTo
24 күн бұрын
Good to meet you!
@Petergabriel555
24 күн бұрын
James, I am not one to comment easily, but after noticing an exceptional panel gauge peeking out of a box during the walk, I could not resist. I cannot begin to explain how extremely jealous I am as a South African hand tool user. The wealth and choice of tools available to you guys in America is mind boggling. I mean, we can find stuff here, but it is difficult at best. Furthermore the quality is mostly sketchy or the tools are in bad shape. I would give anything to walk through a tool meet like this with a bit of green in my pocket. Anyway, you are not allowed to complain about tools, ever. Please enjoy what is available to you on my behalf.
@timothymallon
25 күн бұрын
Oh man, this is a 3 hour drive for me...I could go to this tomorrow...
@WoodByWrightHowTo
24 күн бұрын
We have it going today and tomorrow.
@williamcary8029
24 күн бұрын
I would think I arrived in Valhalla. All those antique tools. So much beauty in the old hand tools.
@WoodByWrightHowTo
24 күн бұрын
If you want to find one near you check out www.handtoolfinder.com
@williamcary8029
24 күн бұрын
@@WoodByWrightHowTo I did not soon but I bookmarked it. Will do some looking in AZ for something like it.
@WoodByWrightHowTo
24 күн бұрын
Arizona is kind of hard. It's a bit of a tool desert
@TheNewJankyWorkshop
24 күн бұрын
I had no idea this was there... need to remember it for next year. This is less than an hour and a half away from me!
@tromaztrombetta8901
20 сағат бұрын
Very good, as ferramentas também expressa a cultura de um povo, foi o que percebi 👍👍👍
@Clem68W
25 күн бұрын
You can't fool me into believing New Hampshire is real.
@ChrisStCyr-gnt7
25 күн бұрын
He’s in Brookline. Some of us consider that northern Massachusetts! 😂
@moisesferreira1812
24 күн бұрын
É fantástica a variedade de ferramentas antigas. Muitas dessas ferramentas mostradas no vídeo para nos aqui são raríssimas
@cbryantbear6498
24 күн бұрын
Thank you James!
@GWP323
23 күн бұрын
Jacktown in Bangor, PA. is next weekend (5/18-5/19). Last weekend was Zagray in Colchester, CT. (see Bob and pick through his .25 cent tables!) and C.A.M.A. in Kent, CT the weekend before. They all have events throughout the year and my truck always goes home a little heavier. Several other KZitem folks make videos about these shows and it always amazes me what can be found and at great prices. George
@WoodByWrightHowTo
23 күн бұрын
Can you email me information on those I've never heard of any of those ones. jameswright@woodbywright.com
@GWP323
23 күн бұрын
@@WoodByWrightHowTo James, I just emailed you "List of 7" in the subject line.
@brendanlangord1687
24 күн бұрын
Figures that this is only an hour from where I live, and I'm in Portland, Oregon for work. Looks like fun. Thanks for sharing
@WoodByWrightHowTo
24 күн бұрын
Are you going to be at the best in the west this fall? It is a 3-day tool convention and this year it's in Seattle
@brendanlangord1687
24 күн бұрын
@@WoodByWrightHowTo Sadly I won't be. I'm on a music tour on the west coast until the end of May, then intermittent travel through the US during the summer, with a different act, then in Europe for most of the fall. But I am planning a trip to Liberty Tools in Liberty, Maine this summer when I am home on a break..
@garychaiken808
23 күн бұрын
Great job. Thank you 😊
@egonmilanowski
24 күн бұрын
18:30 I have been looking for a demonstration slide rule like that for a bit now. I am not sure how I would have gotten that home though. Think it counts as a single personal carry on?
@hassanal-mosawi4235
25 күн бұрын
Thanks for sharing that!
@orbitalair2103
24 күн бұрын
10:56, you blew right over a Record 405 combination plane, in a decent looking box. when did they stop making those?
@martydom666
25 күн бұрын
I need a left side fence for a stanley 55 please. And a screw for the skate to lock the adjuster in place.
@orbitalair2103
24 күн бұрын
I hear ya brother, I recently picked up a stanley45. it was frozen up, but I got it working, just need a couple screws, the strip blade, and a knicker. I keep getting outbid on fleabay. But in july we are headed to PA, and will be about90minutes from that tool shop in ohio.
@6atlantis
21 күн бұрын
Are there any other tool meets/flea markets in MA/NH that you could pass along to me? I’ve been asking around and searching online but haven’t found any, i’m surprised I didn’t see any advertising for this event. Thanks.
@WoodByWrightHowTo
21 күн бұрын
Most of the tool events are just with the tool collecting organizations and so you have to be a member to get an invite. This one was hosted by mwtca. If you want to see a list of every place I know of to buy hand tools check out www.handtoolfinder.com
@6atlantis
21 күн бұрын
@@WoodByWrightHowTo thank you
@WirmanogluMustafa
5 сағат бұрын
It so quick show I become dizzy
@mikenagle304
25 күн бұрын
How much is that humongous slide ruler and is it a advertisement sign? Lots of awesome stuff. Wish I was there.
@WoodByWrightHowTo
24 күн бұрын
Yes that slide rule is a advertisement.
@orbitalair2103
24 күн бұрын
20:45 is that a Stanley 46? or a first run stanley 45? the blade seat appears canted, so 46?
@WoodByWrightHowTo
24 күн бұрын
That was a 46.
@coreyshortland2074
24 күн бұрын
Please include more axe content :) big world of axe collectors
@ferguscosgrave7510
25 күн бұрын
Thanks
@acrazydurian
22 күн бұрын
only 1 froe from a woodworking tool event... damit. they are so hard to find
@BOJIEH
24 күн бұрын
Я клянусь, если переместить этот рынок в СНГ, то не осталось бы даже столов, на которых лежат эти вещи. Даже пикапы у продавцов бы повыкупали.
@dandelie2067
23 күн бұрын
Love to see the tools for sale. Don't get wet.😮
@GeofDumas
25 күн бұрын
what the heck? thats my town haha. i didnt know that was going on
@WoodByWrightHowTo
24 күн бұрын
I put on an email every other week with upcoming tool meets if you want to stay in the know or you can join mwtca and they send out invites to all of the tool meets. There's quite a few of them up this direction.
@dpmeyer4867
9 күн бұрын
thanks
@ChrisStCyr-gnt7
25 күн бұрын
Welcome to the Granite State James.
@robertbenedetti3154
21 күн бұрын
How do you find out about tool auctions/ sales like this?
@WoodByWrightHowTo
21 күн бұрын
The auctions are run by a couple different companies. But the tool meets are run by different collecting associations. You generally have to remember to get an invite. This one was hosted by the mwtca. If you want to find one near you or more information check out www.handtoolfinder.com
@Artzandcatz
12 күн бұрын
Did I miss the one in Athol ? Or Starrett? 😢
@WoodByWrightHowTo
12 күн бұрын
Yes that was a week ago.
@jaskiniamestwa
19 күн бұрын
…how much for the whole lot?!
@davewest6788
25 күн бұрын
Welcome to my state
@WoodByWrightHowTo
24 күн бұрын
Are you going to be at the tool meet today or tomorrow?
@davewest6788
24 күн бұрын
@@WoodByWrightHowTo unfortunately no. Hopefully I can make it next year though. Have fun and hope you get to see some other sites while you're here.
@user-wh7iz9re7v
24 күн бұрын
Привет из Киргизии
@What_Other_Hobbies
25 күн бұрын
That's a lot.
@fisshayemezgebu8858
19 сағат бұрын
Hi___Is it in USA?
@WoodByWrightHowTo
16 сағат бұрын
This one is. You can look at www.handtoolfinder.com to find one near you.
@davidwood5341
4 күн бұрын
I appreciate you trying to show as much as you can but haste often makes waste. I would rather see half as much shown more slowly so we can actually look at what's there rather than have you run up and down the isles. Having said that, I enjoy your tours and never miss one.
@WoodByWrightHowTo
4 күн бұрын
I usually try and do a live video where I can go slowly. Unfortunately the internet connection was too crummy for that. And I can't upload a long format video going slowly. So I try and do one of each but unfortunately I couldn't do a live here.
Пікірлер: 61