I was sweating - cause I thought I had to buy a new printer. But after watching your video. Simply- steps worked! Awesome- big thanks to you sir!
@TerryJonesPrinterRepairs
9 ай бұрын
You need to change that supercapacitor if you haven't done so already it is corroding your motherboard and your printer will be dead in 3-6 months if you don't
@brianowens2410
12 күн бұрын
I did not think I could get my Brother printer to power on I tried numerous times, great video and extremely helpful, thank you 🙏🏻
@TerryJonesPrinterRepairs
12 күн бұрын
@@brianowens2410 you need to replace the supercapacitor it will have started to leak it's alkaline contents on to the motherboard
@nathanblades3395
Күн бұрын
Thank you so much my wife was in a panic because our printer wouldn't turn on it works perfectly now 🎉
@TerryJonesPrinterRepairs
Күн бұрын
@@nathanblades3395 you have to change the super capacitor otherwise in 3-6 month's it won't turn on at all. Not being able to turn on is a sign the capacitor is starting to leak and corroded the board
@muddy1944
13 күн бұрын
Dude!!! You are the fricking MAN. Just did the procedure you described at the 3:50 mark and it worked like a champ. Thanks for taking the time to make this video.
@nerdbenana
2 жыл бұрын
Wow this is way better than the Brother official support page. Thank you!
@cameronlaird894
2 жыл бұрын
WOW! Mr. Jones' turn-on sequence worked for me immediately. Without his help, I would have had to buy a new printer--and of course the outage came at a time I urgently needed print-outs.
@TerryJonesPrinterRepairs
2 жыл бұрын
Be sure to fix it properly by changing the capacitor.
@nicusavary
Жыл бұрын
You can't imagine, i'm so thankful for this video. I just bought a new toner and the very next day i turned of the printer and it didn't want to start anymore.
@nicusavary
Жыл бұрын
how much time do i have to change the capacitor?
@TerryJonesPrinterRepairs
Жыл бұрын
@@nicusavary it is already leaking and corroding the circuit board as we speak
@CSRjr1969
3 жыл бұрын
Still works, got off easy with the reset after a surge from a lightning storm. Thank you!
@d.hughredelmeier1960
7 ай бұрын
Thanks! The fix worked for my MFC-L2720DW. The hardest part was re-installing the plastic side panel. I admit that my soldering was kind of bad but I tested with a DVM before re-assembling.
@aprilmiller1831
Жыл бұрын
MFC-9130CW has 2 capacitors! Good thing I ordered an extra. 1 extra screw to remove from cover, and a metal shield over the mother board. Even though a different unit it was helpful to see your approach to removing the cover. I love how removing covers sounds like you're breaking them. Sometimes you are.
@lisaw6385
2 жыл бұрын
Thank you so much. We had a bad storm with lightening that struck very close. My computer router got fried and my printer would not turn back on. It was due to your video that I now have a working printer. Your reset technique worked great. Thanks again.
@el-chulio
2 жыл бұрын
I was sitting in front of my L2700DN which also didnt want to switch on and luckily found your Video. I was instantly able to get it back to work with the reset procedure. Thanks man, you saved me a few hundred bugs for a new printer.
@TerryJonesPrinterRepairs
2 жыл бұрын
You need to change the supercapacitor, if you don't the motherboard fails completely within a few months
@RogerTrump
4 ай бұрын
I found I was unable to solder to the remnants of the supercap. I un-soldered everything and soldered my new supercap onto the pads of the motherboard. It worked fine. + is up[ in case you were wondering.
@donshafer
2 жыл бұрын
Great job. My printer just crapped out, followed you method, and it lives!!!!!
@MAXimator70
4 ай бұрын
Your channel is pure GOLD! Thank you so much!
@Vickersteamcare
2 жыл бұрын
Thank you so much!! Just bought a couple of new toners and a drum the day before so I am extra grateful. This is amazing.
@michaelj9237
Жыл бұрын
Tech couldn't tell me how to fix my HL-L2390cdw power on problem, But you did. thank you
@nigelpritchard1738
2 жыл бұрын
This fixed my Brother MFC-L27 40DW printer after it was turned off.
@scottmarett1629
Жыл бұрын
Reset done, and replacement cap ordered from your website. Many thanks for the advice. Disappointed at the very obvious planned failure point of their design.
@MarkGolf
Жыл бұрын
Wow you saved my printer from the skip!!! MFC-L9550CDW
@eusouonumero232
4 ай бұрын
Thank you, it worked, I was on work, and the damn machine didn't want to turn on, great thanks!
@alberthakvoort2844
2 жыл бұрын
Just bought one of these capacitors and fitted, works perfect now. Thanks for the video on how to fix it, very much appreciated.
@TerryJonesPrinterRepairs
2 жыл бұрын
Wow you got that delivery fast.
@artlynnphotography7504
2 жыл бұрын
Hi Terry, i did the repair and it works, now my computer can't communicate to the printer. Screen says receiving data. FIXED! I did a firm ware update and restarted computer, all good!
@AngelikaLattner
2 жыл бұрын
I ran into this problem after having turned off my printer during vacation 😱 and with great disbelief and a heavily raised eyebrow I watched your video, read the description of the video and a bit of the comment section before trying it. Holy moly: it works 🙃! Feels like a feature and not a bug. Infinite thanks! 😇
@TerryJonesPrinterRepairs
2 жыл бұрын
you still have to fix it properly, before it becomes permanent.
@mystrength2009
Жыл бұрын
Thank you sir. I had to replace the drum on my MFC L2740DW, but it would not turn on, no power, I was like, "what the hek, and I figured, let me find an answer to my issue here and yep, went straight to KZitem, I found your channel and I followed your instructions to the T and it worked. So thanks a bunch. I was getting ready to toss it. You are appreciated sir.
@renaldoferreira3693
9 ай бұрын
I’m sorry for the inconvenience. I really appreciate this. The printer turns on the problem that I’m having is the temporary thing that I was doing turning off the printer waiting a couple of minutes and then plugging the extension at the same time. That part is no longer working. I’m able to print things but I’m unable to use the Bluetooth. It’s no longer letting me send Bluetooth with my printer. Don’t know if this is what you mean but I appreciate you thank you.
@SunliangLiang
Жыл бұрын
Hi Terry, I'm from US, California. we own a Brother HL-L2380DW, bought new several years ago. It's been lightly used. when we don't use it, we unplug it from wall. Several months ago, it refused to turn on. After looking at some of on-line fixes (before seeing yours), I was able to turn it on after a few tries (press and hold the turn on/off button, and plug the power). But recently, the "trick" no longer works even after many tries. the screen would keep flashing but doesn't turn on. I researched on-line again for the fixes, and found your repair KZitems. I opened the side cover, checked the board, and found that the board looks the same as your KZitem model. So I went ahead ordered your Supercapacitor (which took more than 2 weeks to arrive!). I replaced the capacitor, but to my surprise, now the screen is not even flashing, and there is no sign of life of the printer even I tried the "reset". I did everything very carefully, and I think I am pretty good on electronics repairs and using soldering tool (mine is 40W I believe). So this is pretty much a mystery to me... I then opened the cover on the other side where the power board is located. The power board looks similar to the one you demonstrated on the KZitem, but not exactly the same. It does have 2 fuses which are all good after checking, and there is no sign of anything turned, or mold. I measured the voltages at the connector (8-pin) the 2x 24V are presents (24.5V) ... what could be wrong according to your experience? I just don't like to throw away things like this which are well engineered and lightly used (we might have just printed less than 500 pages!). Thanks in advance for your advice!
@TerryJonesPrinterRepairs
Жыл бұрын
Yes unfortunately the window of opportunity to repair your printer had passed. As you have now learnt you must replace the supercapacitor when it reaches the "having to power it on whilst holding the button down stage". If you don't replace the supercapacitor and you keep turning it on using the power button method eventually the main board gets wrecked completely. If you had replaced the supercapacitor at the very moment the problem began your printer would still be functioning today and would continue to work for the next 5 years. It is also important that the supercapacitor gets replaced from the topside and not pulling the motherboard out flipping it over and replacing it from the bottom side just because you want to do a nice clean job, the boards are multilayered not two sided and the risk of damaging internal board layers is very high. The moment the problem begins the supercapacitor must be replaced or with in 3 months you'll have to buy a new printer
@KIKIDOZ1TREZ
7 ай бұрын
Thank you.... Thank you very much. I had a paper jam, turned the printer off and it would turn back on. It would have been ok, but I was a work and the next shift was coming on. Again Thank you.
@TerryJonesPrinterRepairs
7 ай бұрын
You need to change the supercapacitor on the motherboard. The fact that you couldn't turn your printer on is a sign that the super capacitor has failed and is about to leak. You have about 3 months before the printer is dead completely
@KIKIDOZ1TREZ
7 ай бұрын
@TerryJonesPrinterRepairs Thank you I will let management know. 👍🏽
@pjmlegrande
7 ай бұрын
Also, looking for continuation of this KZitem because it only goes up to removing the capacitor, but not soldering new one in. I’ll look around for that
Thank you! I reset my MFC-L2700DW and it's alive again!
@TerryJonesPrinterRepairs
Жыл бұрын
You need to solder in a new supercapacitor soon before it doesn't turn on at all
@robertlevene3614
Жыл бұрын
Wonderful! After the power-button method, as Dr. Frankenstein put it, "It's ALIVE!"
@TerryJonesPrinterRepairs
Жыл бұрын
You need to replace the super capacitor before it corrodes the motherboard
@davidprewitt1050
3 жыл бұрын
Thank you for the video. My Brother MFC-L2700DW would not turn on. Your 4 steps got it back up and running ... so, it does appear to be a capacitor issue. I've saved the links to this video and your website if I decide to repair it. I was getting ready to buy a faster printer (not an AIO) with a larger tray even though I was sick over the money I had just spent for a new drum and toner.
@youngyogawithsylvia7220
2 жыл бұрын
Thank you so much! I turned on the printer by watching your video!
@raeduke4145
2 жыл бұрын
Hello Terry, I was wonder in the case that it doesn't turn on with the method shown you had said it could be the power supply possibly being shot. Is there a way to replace the power supply on a MFCL2710DW model? Thankyou
@TerryJonesPrinterRepairs
2 жыл бұрын
The machine is not that old and is still a current model. I would contact brother and get it repaired under warranty
@tillkorten7252
2 жыл бұрын
The repair worked perfectly, thanks a lot! Did you get around to trying to replace the supercap with a regular capacitor?
@Sempervivi
3 ай бұрын
THANK YOU for saving me a load of time and potentially money!!
@pjmlegrande
7 ай бұрын
Annoying shits are a plague on us all. Thank you very much for this tutorial, which reinforces my suspicion that getting necessary home gadgets to work involves a form of magic not based in any logico-deductive paradigm. Notwithstanding that, I’m most grateful. Cheers from El Lay
@Frederwin
Жыл бұрын
Sarasota, Florida USA……. Terry, you’re the best..! Thank you for this video…. I truly appreciated it and I’m now a subscriber…..
@TerryJonesPrinterRepairs
Жыл бұрын
Make sure you change the supercapacitor asap! failed capacitors leak their alkaline contents and corrode the main board. Then the printer is Truly dead.
@shawnminaei1086
2 жыл бұрын
Thank you Sir. my printer worked rightaway after your trick
@dooneypotter6601
8 ай бұрын
OMG! Thanks! My printer just turned on! Thanks so much.
@TerryJonesPrinterRepairs
8 ай бұрын
You need to change the supercapacitor. Failure to replace it will mean a completely dead printer in 6 months
@bradkaral1188
2 жыл бұрын
Terry, this is very helpful. Thanks. Do you know if this would also apply to the MFC-7440N ?
@miro2424
Жыл бұрын
WOW, it worked! THANKS! Mine is a Brother HL-L2390DW
@mikerodr
Жыл бұрын
Yes your little Hack did work ; it came on ; thanks for your help
@TerryJonesPrinterRepairs
Жыл бұрын
clocks ticking you need to change that super cap as your failed one will be leaking and corroding the board
@katebeedot6964
4 ай бұрын
Hello I'm writing from Rome. My quite new Brother printer is the basic L2375DW which had replaced a similar but older very sturdy model. Well, the new one konked out suddenly. The printer repair shop told me it was capacitor failure as its outflow current was half the normal current) (??). Anyway I tried the reset system several times but it didn't work. As you said at the very beginning , if the reset doesn't work then it's not the capacitor and not to try it out. Quite confused now. Does this mean the new machine is dead or is there another maybe complicated reason? Thanks so much, hope you can answer me on the what to do now question. I had also watched your soldering video, very interesting and very detailed. Thanks so much, Kate
@chalz_r
2 жыл бұрын
My god this is a live saver, thanks a lot for your video!
@PLBGCO123
6 ай бұрын
THANK YOU SO MUCH , SO GOOD OF YOU TO SHARE THIS. IT WORKS!!!
@XxBeepBoopxX814
Жыл бұрын
I have the L2740. When I turn it on, the screen turns on but it's blank (no logo), none of the buttons light up. The screen then turns off and I can hear the printer's initiating sequence (motors, fans start moving). Then a "click" noise happens and the printer shuts off. I tried to do the reset like you showed, but the machine still behaves the same. Would appreciate to get your take Mr. Jones!
@verimov
Жыл бұрын
I have a MFC-L2720DW, and a similar problem. After reading the comments here I've decided that I should look into the process of updating the firmware. After a power outage my printer is cycling on over and over. The scanner head moves a few steps and then the printer resets and starts all over again. I'm stuck in that loop. The scanner head eventually makes it to the end and can go no further so the drive belt just clicks over the cogs and then the printer resets again. I opened it up and reversed the belt to return the scanner head to home and the same process repeats - scanner moving a few steps with each automatic reset until it hits the end of the track and just clicks. I have tried the reset but I can't seem to interrupt the power cycling loop. I'll try to replace the super-cap if you think that will solve it.
@TerryJonesPrinterRepairs
Жыл бұрын
Unfortunately you have left it too late you needed to change your supercapacitor a few months ago. You will find your motherboard will have a section that is corroded from the alkaline salts inside the supercapacitor leaking out this is why it keeps turning itself off and on rebooting endlessly. You need to replace your motherboard
@verimov
Жыл бұрын
@Terry Jones Printer Repairs thank you for the diagnosis. Is the motherboard an easy worthwhile repair for someone without much soldering skill? I think we might just cut our losses and get a new laser printer instead of pouring more time into this one. It is 6 or 7 years old and has seen lots of use. Something robust and more basic with wireless printing if you have any recommendations. Fax not required, could drop photocopying and scanning if that makes it less likely to fail. We've liked Brother over the last 15 or so years.
@dashruentchannel2412
3 жыл бұрын
thank you so much, it works!! i really thought my printer was destroyed.
@anthonyt7447
2 жыл бұрын
Have an MFC-2720DW. The unit does turn on and the brother logo appears. Fan and various rollers etc. will go through the initial start up procedure. Then the screen will remain white with Brother logo for various lengths of time before you hear a click and it will start the entire process over again. Seems like it will continue to do this forever, it has randomly completed start up during this cycling and started working for me twice since the problem began. When it loses power or there is a flicker it returns to this state and will not complete power up.
@TerryJonesPrinterRepairs
2 жыл бұрын
Plug in a USB cable directly from the printer to your laptop and update the printers firmware
@lalitab536
Ай бұрын
What's my option if the reset doesn't work?
@_R_S_6
Жыл бұрын
Thank you! Did the reset and it works..all that it needed
@TerryJonesPrinterRepairs
Жыл бұрын
See the message from the guy above who let it go too late, you have to change the supercapacitor if you want a printer that works in 3 months, being unable to turn the printer on is a sign the capacitor is starting to leak and is about to corrode your motherboard.
@rocko6439
Жыл бұрын
Your solution resolved my "power on" problem. Do I still need to replace the capacitor? Thanks a bunch.
@TerryJonesPrinterRepairs
Жыл бұрын
yes, it has failed and will be starting to leak its alkaline contents which corrode the motherboard.
@rocko6439
Жыл бұрын
@@TerryJonesPrinterRepairs How soon will the repair needs to be done before it fails again completely? and I wasn't able to find your other video which shows how to replace the capacitor. Thanks again.
Great video, any chance the power supply video can be shown? This trick did not work so Im sure its the power supply as you mentioned. If its the fuse im wondering if I can just go up a knotch that way it doesnt blow again. thank you.
@TerryJonesPrinterRepairs
Жыл бұрын
Do the test three times in a row just to be sure. In a lot of the cases I see now due to the age of the printer it is not a dead power supply causing it not turn on. The supercapacitor can leak it's alkaline contents on the main board which corrodes it and kills the main board in the process
@user-rw5kq4is4s
9 ай бұрын
Replaced Super Capacitor & it absolutely fixed the power-switch issue!! However, I'm getting an ADF cover open error message that I can't clear.... paper isn't jammed or stuck in ADF. Any suggestions? Thanks
@TerryJonesPrinterRepairs
9 ай бұрын
What model printer
@user-rw5kq4is4s
9 ай бұрын
Thanks for replying. A connector came loose after transporting the Brother MFC-L2700DW home from the workshop. Reconnected it & everything works great. Thanks for saving me the $250 for a new printer!! Please keep posting for your community followers!
@deborahlofano9336
Жыл бұрын
Worked perfectly. Thank you so much!
@davidt8927
3 жыл бұрын
Great Video! Now just need to change the capacitor!
@greganderson5285
2 ай бұрын
Thank you for your great advice! I have a quick question. I turned my printer off a few days ago by holding the power button down until it shut off. I don't think I ever did that before. Then I couldn't get it to start back up until I reset it per your procedure. But now it stays on, and even if I unplug it and plug back in, it turns on like normal without having to perform the reset procedure. Do you think I still need to replace the super cap?
@TerryJonesPrinterRepairs
2 ай бұрын
Probably not but you need to take the side cover off and look at the area around the super capacitor on the main board to see if it's starting to corrode.
@greganderson5285
2 ай бұрын
Okay, I pulled that cover off again to look around the super capacitor, and saw no corrosion at all. Man that cover is a bugger to get back on! But I got it back on and everything is back up and running well again. Thank you for all help!
@The666121
Жыл бұрын
I have a dcp 8110 that will not turn on after initially it is used. You have to leave it for 20 minutes before you can get it to turn on. Can you help me thanks Jon
@renaldoferreira3693
Жыл бұрын
I just had this problem. Thanks my brother.❤
@TerryJonesPrinterRepairs
Жыл бұрын
The clock is ticking you need to change the supercapacitor
@renaldoferreira3693
Жыл бұрын
So you think that’s going to happen again?
@renaldoferreira3693
Жыл бұрын
How do I fix this problem? It’s a good printer. This is the first time this happens to me.
@TerryJonesPrinterRepairs
Жыл бұрын
@@renaldoferreira3693 the video at this link shows you how to do it from start to finish kzitem.info/news/bejne/rICgx3qbiZd4a6g
@Mark-kr1uu
Ай бұрын
Thank you much, it worked.
@nikkibemke
Жыл бұрын
Thank you so much, it worked just fine for me !!!!
@songtaozhao4826
Жыл бұрын
fantastic working solution
@saraherrera7634
2 жыл бұрын
OMG IT WORKED!!!! Thank you so much!
@johnwojcik2924
3 жыл бұрын
That worked. Thanks. Any idea how to get my L2700DW from dropping off the network?
@TerryJonesPrinterRepairs
3 жыл бұрын
If it's an old wifi router your using you need to change the network settings in the printer to a static IP address and communicate with the printer by IP address. The down side of this is any Apple products will have trouble communicating with the printer. If your router is new leave the printer network settings set to auto IP and communicate by Node Name. If you are using wifi boosters or repeaters on your network you must connect the printer to your primary wifi router by either wifi or cable connection.
@jettdial4639
5 ай бұрын
Thanks for this video
@Kildaren
Жыл бұрын
Ok, I ordered the part from you. Do you also have a video for a layman on how you solder it back in? Thank you
@TerryJonesPrinterRepairs
Жыл бұрын
kzitem.info/news/bejne/rICgx3qbiZd4a6g
@josephgiammona185
2 жыл бұрын
Thank you. It worked, just as you described.
@derekwindle8047
Жыл бұрын
My MFC-J6510DW won't light up/turn on. Is there a solution? Thanks
@TerryJonesPrinterRepairs
Жыл бұрын
Yes buy new printer that printer is 20 years old you've had it long enough
@jettdial4639
5 ай бұрын
It helps a lot🙏
@bjornhansson8539
2 жыл бұрын
Thank you Terry!
@mr.jflores5369
3 жыл бұрын
Thank you very much! First try and it worked!
@newairinc.431
Жыл бұрын
Thank you I just was thinking to buy a new printer. you saved me a printer
@TerryJonesPrinterRepairs
Жыл бұрын
The clock is ticking you need to change the dead supercapacitor, that dead supercapacitor starts to leak alkaline salts when it fails and corrodes the bottom right corner of the motherboard.
@joeceles4453
3 жыл бұрын
Thanks for the video Terry. My MFC 2700dw was unplugged for a week and now only the buttons below the LCD stay on meanwhile the LCD flashes without staying on. How do I fix this printer to stay on?
@TerryJonesPrinterRepairs
3 жыл бұрын
perform the reset procedure in the video
@charliedcho
8 ай бұрын
Seriously thank you so much!
@nshenwari
3 жыл бұрын
Thank you so much my one just started working
@jeremyc3911
7 ай бұрын
Interesting. Unfortunately my 2730DW isn't quite doing that. When I plug it in, I get the green LED, but nothing else. No sounds, no chime, no display. Holding the power button while plugging in doesn't do anything. It is interesting when I plug in USB, the Brother software recognizes it as a 2730DW, but I can't firmware update it - the tool is useless. It recognizes the printer and when I click next/continue it looks like it's doing something, it gets to 100% and I have option to continue to update another unit or click done or finish, at which point the update tool just closes. No effect on the printer itself - as nothing is on the LCD. When I connect it to my LAN via ethernet, nothing happens, probably because the ethernet is not enabled. Not sure how I can get the screen working or even if I can be sure what the problem even is. Just green light on the power when plugged in. When I hold the power, it doesn't turn off the printer or do anything . None of the other buttons are responsive, likely because the screen has nothing on it. Any ideas would be welcome
@mikemoyer6592
2 жыл бұрын
thank you so much you def. just saved my work day
@chigusafaint5848
5 ай бұрын
Wow Thank you so much 🙏🙌🏾🙌🏾🙌🏾
@gregurban-motors-ltd1533
Жыл бұрын
Thanks, machine working now! 👌
@renaldoferreira3693
9 ай бұрын
Hi, I came across your video. I am having problems with my printer. What part of the printer is damage at this point. The temporary solution of turning off and then turning on, has been working for sometime, but it’s no longer working. What The name of the part that I need to purchase to fix this problem
@TerryJonesPrinterRepairs
9 ай бұрын
Too late Buddy you now need a new printer. As explained in all the videos when you cannot turn your printer on by using the power button the supercapacitor has failed and is leaking it's alkaline contents onto the motherboard. Using the reset method does get it to turn on but if you do not replace the supercapacitor immediately your motherboard gets damaged from corrosion.
@user-ig4ei6nd6y
2 жыл бұрын
Very informitive video thank you so much! I have the same printer as shown in the video (Brother MFC-L2740DW). However my printer receives power but the screen blinks white. Other computers do not recognize this as a printer anymore. Will your method work for my issue or is my printer a brick. It would be great to hear what you have to say. Thank you.
@TerryJonesPrinterRepairs
2 жыл бұрын
No you have a blow-up main board or scanner replacing the capacitor will not fix your problem. Unplug all cables from the motherboard accept the power supply and the screen cable to isolate if it's an external part other than the main board that has failed.
@kamg.5436
3 жыл бұрын
Thank you so much!!
@upwardsmicrogreensandmushr6479
3 жыл бұрын
Well that was easy, thank you!
@intragroove
2 жыл бұрын
Hi Terry, I have a MFC-J475DW that stopped turning on after I unplugged it and plugged it back in. When I did the reset procedure, the lcd screen quickly flashed white, then turned off. Since it still turned on, I went ahead and replaced the supercapacitor; however, it is still behaving the same way. Any ideas what's going on, and what I can do to fix it? Thank you!
@TerryJonesPrinterRepairs
2 жыл бұрын
Did you install the new super cap the right way around? Some replacement supercaps are acually labelled the wrong way around. + is - All super caps have the same physical layout simply install the new one "looking the same way" and ignor the + and - symbols. An entire batch I received from china recently was back to front.
@derecka1
2 жыл бұрын
I am having a similar issue in which my printer model MFC-L8610 CDW will not power on but the power light it solid green. Any ideas? I tried your reset procedure but failed.
@TerryJonesPrinterRepairs
Жыл бұрын
You need to plug a usb cable direct from your printer to your computer and run the firmware update tool and update the firmware. The printer has been turned off in the middle of a firmware update.
@markh6035
Жыл бұрын
good vid I would get a camera stand for future ones
@JosephSalinas123
Жыл бұрын
Got your capacitor and it worked for us! Thank you!
@ernieengineer3462
2 жыл бұрын
It works! Thanks so much.
@shamshersinghboparai4658
2 жыл бұрын
Hey bro I have got MFC-L2713DW I have tried everything it still doesn't work. I think the problem is not in the capacitor. It doesn't turn on with your method. Can you please help me to fix it. Thanks
@chronos1951
Жыл бұрын
Awesome thanks reset worked
@TerryJonesPrinterRepairs
Жыл бұрын
You need to change your supercapacitor it is starting to leak and corroding your circuit board
@rendichanel1298
Жыл бұрын
Aku punya brother mfc eror o6 bagaimana solusinya
@andrewstauffer8709
3 жыл бұрын
Great info, but the video cuts out at 15 minutes for me. Do you have the rest of the video somewhere? Also, you mention creating a video testing a regular capacitor, but I can’t find it on your channel. Did you ever try that?
@TerryJonesPrinterRepairs
3 жыл бұрын
kzitem.info/news/bejne/s5ysk4djb3lppXo
@jennychang778
3 жыл бұрын
I visited your website, but can't find the parts for the model #: mfc-L2740. Am I missing something?
@TerryJonesPrinterRepairs
3 жыл бұрын
I only have some of the parts I sell listed, What do you require?
@jonasjohansson7651
11 ай бұрын
Big thanks!
@brandonfriesen2619
2 жыл бұрын
According to your video I have a bad PSU on my 2750DW. I have been unable to find a solution to this problem on youtube. Have you made a video about this or do you know a video that is at least partially applicable to this model?
@cissehamidou4916
3 жыл бұрын
hi!! i have a similar problem with my brother mfc l8650dcw once i click on the power button, white scrren came on the display after 5 seconds its show "brother" after 15 seconds it became white screen any thing after no songs inside, any option like nothing won't moving inside
@kent52584
Жыл бұрын
Really really thank you for your guidance. I was so scared that my printer is done…
@abs1849
3 жыл бұрын
Great video thank you. I have a Brother MFC L2710DW. When plugged in fax copy scan lights blink on for a second, and display is just full of black squares. Any advice? Saw previous post with idea of baking in hot car (assuming this is same fault) but it's pouring with rain and not sunny at all. I sent you email with pic of screen. Thanks for your help!
@ThePresidentAnybody
Жыл бұрын
I have this same, problem did you find solution?
@crazyawakening
Жыл бұрын
Can you list the part number of the capacitor? I have an MFC-9130CW would this capacitor be the same size? Thanks
@TerryJonesPrinterRepairs
Жыл бұрын
You can buy the part here www.fixitfastelectronics.com/printerparts.htm
Пікірлер: 234