Thanks for making this. It helped. That 1/16 roll pin on the wheel is tricky.
@noluckpureskill9985
4 жыл бұрын
FYI fuck using punches for roll pins, most of the roll pins u'll ever come across can be EASILY installed by pressing it in with channel locks. Just a little trick
@solidsnake902
4 жыл бұрын
A1 sight holes are the same size diameter. Its the height of the sights that’s different. L is for long range
@mancaveveteran4975
4 жыл бұрын
Aahhhh, I see. Thanks.
@johnny-smith
4 жыл бұрын
How did you get the aperture to align in the center? Mine also was all the way on the left side, and I can't get it centered.
@johnny-smith
4 жыл бұрын
Actually, the windage adjustment knob on the side of the upper's carry handle can be used with plenty of space to center the aperture for a pre-zero quick fix. Also, I bought the same LUTH-AR A1 rear sight assembly from Brownell's, but mine was out of spec and impossible to install. Had to return it and get a real USGI one.
@tommysmith5905
3 жыл бұрын
That wasn't much help
@egdallis
4 жыл бұрын
What rail did you use for the carry handle?
@mancaveveteran4975
4 жыл бұрын
Elias Dallis I found this mount at a LGS that I frequent. Only cost $5. They range anywhere from $5-20. No name just packed in a plastic bag.
@egdallis
4 жыл бұрын
@@mancaveveteran4975 thanks dude but is it of good quality or does it come loose after firing a few rounds?
Пікірлер: 10