I love the good old glitchy sounds of *”AAAIIRRRRrrrrrrÎÈÀÆ”*
@skystoyhunts7225
Жыл бұрын
No wonder she's looking at you like that. If my child screamed like a freaking glitchy demon I'd be like wtf is happening too
@sadthixx7511
Жыл бұрын
Mommy! Mommy! Mommy! Mommy! **Digital screams of the damned**
@Skeeballman64
Жыл бұрын
No "Baby?" for you!
@brokenrobot2004
Жыл бұрын
Holy crap, what kind of ridiculous sound chips do Wuv Luvs and their babies have going on for their glitches to be like that I wonder 😱😆 I don't think I've ever heard a toy with such sudden, ear-piercing glitches quite like them, especially on low batteries alone! Btw.. have you ever disassembled a Wuv Luv to a point you can get to the gears that control the head? I can't open mine up past the skin being off aswell as the head, exposing nothing but the circuit board basically; I only have access to the gears that control the pouch which work fine I find. One of the WuvLuv's gears is shot and I want to 3D print a replacement for it so she can move again; I want me and my sister to have the full WuvLuv experience before we play with it, weird unnerving movements and all! 😆 I do have some knowledge on these things too and have tinkered with furbies of all generations for years now, but this was something unknown to me; it almost seems like I can't get that giant back plate off without like, sawing it off or something which I prefer not to do if possible since it is the only furby fake in my collection as of current O_o
@The_One_Time
Жыл бұрын
Ok, so from what I’m understanding, you cannot separate the WuvLuv’s body shell from the base, correct? If that’s so, that’s because there’s wires going from the circuit board into the bottom internals and a single clip on the front that are holding it together. Without soldering, what you have to do is the following: 1. Undo the washer screw holding the universal joint mechanism into the back of the WuvLuv’s facial gearbox, allowing you to remove the head from the rods driving it and get access to the circuit board, 2. Undo the two screws holding the circuit board into place, 3. Pop out both the microphone and antennae connector (you’ll have to hot glue it back later), 4. Remove any tape holding down wires that would interfere with the disassembly, 5. Undo all four screws on the bottom and shove a flathead screwdriver under a clip holding the front side of the WuvLuv to undo it, 6. (this isn’t very elegant at all, but it’s the only way I know how to do this without desoldering) pull the circuit board outwards to the WuvLuv’s left until the orange speaker wires are fully extended and pull the body shell upwards, making sure no circuitry or mechanisms get caught during the process. I’m sorry if this is confusing, it hard to explain how I did it through text. If you need images, I can make a post or two showing how I disassembled my WuvLuv.
@The-creator-of-good-videos-15
Жыл бұрын
@@The_One_Time Do you have a Robosapien X? If so, can you do an audio-rip of the robot?
@garry12gg
Жыл бұрын
LOL!
@brandykackley2545
Жыл бұрын
ArrrrrrrrēæÆY
@Liberta85
7 ай бұрын
Mom❤mom🎉mom😊mom🙏mom😜AAAAIIRRRRrrrrrrIAÆ👹
@brookieexists
Жыл бұрын
idea for Bruh 28 putting a Furby skin on fidget friend
@The-creator-of-good-videos-15
Жыл бұрын
You mean Fijit?
@The-creator-of-good-videos-15
Жыл бұрын
@@brookieexists Do you happen to have any walking and dancing RC robots that dance to the meme song where it goes “you spin me right round baby right round like a record baby right round, right round!”?
@The-creator-of-good-videos-15
Жыл бұрын
@@brookieexists It wasn’t a Huggy Wuggy Cactus was it? Or just a knockoff huggy wuggy plush toy that had the body of him and his head looked the same but his face was differentiated from the original Huggy Wuggy face with some voice box with a really bad audio where sang a song and glitched to a point the Death Screech kicked in?
@The-creator-of-good-videos-15
Жыл бұрын
@@brookieexists So it was an unknown brand ripoff of the huggy wuggy cactus that screeched. Please show me how it screamed.
@The-creator-of-good-videos-15
Жыл бұрын
@@brookieexists Yeah, okay. But how did the Huggy Wuggy cactus screech and scream?
@The-creator-of-good-videos-15
Жыл бұрын
After the little Wuv-Luv called out for his/her mommy, it screamed in glitch language… how did this toy glitch out?
@The_One_Time
Жыл бұрын
Low batteries, of course. Lol.
@eilikfilms
Жыл бұрын
Could you do another video of joebot voice recognition?
@The-creator-of-good-videos-15
Жыл бұрын
Hey, The One Time, is there a possibility that a Defender-7 (a red lookalike Prime-8 copy) could be out there somewhere or they’re all out of stock and don’t get produced anymore?
@joerossfiveever5647
Жыл бұрын
@@The_One_Time He gets that from his mother!
@The-creator-of-good-videos-15
Жыл бұрын
@@joerossfiveever5647 What are you talking about?
@berrypepperroni7708
Жыл бұрын
is this a wuvluv 1 or wuvluv 2?
@The_One_Time
Жыл бұрын
This is the Wuv Luv 1. Wuv Luv 2 moms have different phrases/sound effects and three little hearts embroidered on their pouch. The Wuv Luv 2 babies also have different IR signals, different phrases/songs, and, instead of a slot to cut the power to the batteries, a sleep mode that can be activated by holding down the back sensor for a few seconds. The big heart on the pouch also tends to be made of a different fabric on Wuv Luv 2 moms than the Wuv Luv 1s.
Пікірлер: 30