I also got the same problem while changing spuck, a new piston ring...I am still working on the problem...as soon as I find the issue I will let you who needs help up..👍
@abbah43
Жыл бұрын
Ok the solution to that issue is to break the engine in fully.....wash all the parts with patrol and clean it out with patrol and rebuild the engine...DEFINATELY works..💪
@raymonditi4596
6 ай бұрын
@@abbah43 na check the engine magneto key has moved
@arianwiroredjo4024
7 ай бұрын
Hello, i have the same problem, i put a new carburetor, new piston and rings, new gaskets, new sparkplug, but it still won't start. Whats the problem?
@WanderingSawMan
7 ай бұрын
Did you change the ignition coil ? Try it
@MangaleGurung-nv8vh
Жыл бұрын
Thankyou very much for the brush cutter repair information 👋👋👋👋👋ℹ️ℹ️ℹ️ brother
@WanderingSawMan
Жыл бұрын
Thank you ❤
@ozgurakalin3154
2 жыл бұрын
There was no problem in the alpina 2001 model vip52 var working. But the pad was finished, a new one was installed, at the same time the piston ring was renewed, the hand trigger assembly was changed, the spark plug was changed, the carburetor cleaning, the paper seals in the carburetor part were renewed, the engine is not working at the moment, I would appreciate it if you could reply
@WanderingSawMan
2 жыл бұрын
Hello sir, first time i am hearing abt this machine. I just googled to know about alpina vip 52 got some pics. I have no idea abt this machine. If everything is ok then just check spark plug just to know that is fuel coming to combustion chamber. If fuel is not coming then it is clear that carbuetor is faulty.. Thanks for your feedback
@ozgurakalin3154
2 жыл бұрын
@@WanderingSawMan When we remove the spark plug from its place, I see the ignition by trying it at idle. When I pull the starter while the spark plug is not in place, the gasoline is sprayed out by the spark plug in a smoky state. but the ignition doesn't work even when it's like that. I bought petrol again because there is a problem with the petrol and the problem still persists.
@WanderingSawMan
2 жыл бұрын
@@ozgurakalin3154 it looks like either carb overflow or proper spark is not generating. Do 2 things .. 1. Change the ignition coil 2. Change the metering valve assembly in carburetor / replace carburetor
@ozgurakalin3154
2 жыл бұрын
@@WanderingSawMan I will replace the carburetor first because the ignition coil is more expensive than it.
@WanderingSawMan
2 жыл бұрын
@@ozgurakalin3154 yeah 👍
@raymonditi4596
6 ай бұрын
im pretty sure its the timing.the key on shaft gets out of wack or breaks and the magneto now wont fire at correct timimg check your flywheel key
@WanderingSawMan
6 ай бұрын
No, if so you hear abnormal noise.
@DanielKawazDulau
8 ай бұрын
What is the cause of hard start
@WanderingSawMan
8 ай бұрын
Fuel was not pumping. I had to change diaphram kit
@RachaelWasa
Жыл бұрын
How can I cool the brass cutter
@WanderingSawMan
Жыл бұрын
By allowing itself to cooldown 😂
@shreepervakasaragod
2 жыл бұрын
👌usefull
@Chesrangsangma-zs2je
9 ай бұрын
Kit ka lock saman milega
@WanderingSawMan
9 ай бұрын
Kit ka lock matlab kya hai ? Kis saman ko aap 'kit ka lock' bol rahe ho ?
@yashavantmeshram4393
Жыл бұрын
Wiring kon jodan maya abaji
@raymonditi4596
6 ай бұрын
engine shaft keyway not the pole
@mattDIY
2 жыл бұрын
Good luck
@WanderingSawMan
2 жыл бұрын
Thank you
@90sAliAkbarTech
5 ай бұрын
😂
@p.p.4192
2 жыл бұрын
Kya problems
@WanderingSawMan
2 жыл бұрын
Carburetor complaint
@جزائريموحدمسلم
2 жыл бұрын
ارجوك أريد الترجمة الى العربية عندي نفس المشكل 🧡🧡🧡
@WanderingSawMan
2 жыл бұрын
I can't read this
@ozgurakalin3154
2 жыл бұрын
@@WanderingSawMan There was no problem in the alpina 2001 model vip52 var working. But the pad was finished, a new one was installed, at the same time the piston ring was renewed, the hand trigger assembly was changed, the spark plug was changed, the carburetor cleaning, the paper seals in the carburetor part were renewed, the engine is not working at the moment, I would appreciate it if you could reply
Пікірлер: 37